MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()

After commit 9cce844abf07 ("MIPS: CPU#0 is not hotpluggable"),
c->hotpluggable is 0 for CPU 0 and it will not generate a contro

MIPS: No need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable()

After commit 9cce844abf07 ("MIPS: CPU#0 is not hotpluggable"),
c->hotpluggable is 0 for CPU 0 and it will not generate a control
file in sysfs for this CPU:

[root@linux loongson]# cat /sys/devices/system/cpu/cpu0/online
cat: /sys/devices/system/cpu/cpu0/online: No such file or directory
[root@linux loongson]# echo 0 > /sys/devices/system/cpu/cpu0/online
bash: /sys/devices/system/cpu/cpu0/online: Permission denied

So no need to check CPU 0 in {loongson3,bmips,octeon}_cpu_disable(),
just remove them.

Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>

show more ...

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Li

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.

show more ...

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge tag 'irqchip-fixes-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- A couple of fixes after the IPI as IRQ

Merge tag 'irqchip-fixes-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- A couple of fixes after the IPI as IRQ patches (Kconfig, bcm2836)
- Two SiFive PLIC fixes (irq_set_affinity, hierarchy handling)
- "unmapped events" handling for the ti-sci-inta controller
- Tidying up for the irq-mst driver (static functions, Kconfig)
- Small cleanup in the Renesas irqpin driver
- STM32 exti can now handle LP timer events

show more ...

Merge tag 'asoc-v5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.10

Not a huge amount going on in the core for ASoC this time but quite a

Merge tag 'asoc-v5.10' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v5.10

Not a huge amount going on in the core for ASoC this time but quite a
lot of driver activity, especially for the Intel platforms:

- Replacement of the DSP driver for some older x86 systems with a new
one which was written with closer reference to the DSP firmware so
should hopefully be more robust and maintainable.
- A big batch of static checker and other fixes for the rest of the x86
DSP drivers.
- Cleanup of the error unwinding code from Morimoto-san, hopefully
making it more robust.
- Helpers for parsing auxiluary devices from the device tree from
Stephan Gerhold.
- New support for AllWinner A64, Cirrus Logic CS4234, Mediatek MT6359
Microchip S/PDIF TX and RX controllers, Realtek RT1015P, and Texas
Instruments J721E, TAS2110, TAS2564 and TAS2764

show more ...

Merge tag 'spi-nor/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l

Merge tag 'spi-nor/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

SPI NOR core changes:
- Support for Winbond w25q64jwm flash
- Enable 4K sector support for mx25l12805d

SPI NOR controller drivers changes:
- intel-spi:
- Add Alder Lake-S PCI ID

show more ...

Merge branch 'locking/urgent' into locking/core, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v5.9-rc5' into asoc-5.10

Linux 5.9-rc5

Merge branch 'master' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into dma-mapping-for-next

Pull in the latest 5.9 tree for the commit to revert the
V4L2_FLAG_MEMORY_NON_CONSIS

Merge branch 'master' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into dma-mapping-for-next

Pull in the latest 5.9 tree for the commit to revert the
V4L2_FLAG_MEMORY_NON_CONSISTENT uapi addition.

show more ...

Merge branch 'x86-seves-for-paolo' of https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into HEAD

Merge 5.9.0-rc6 into tty-next

We need the tty/serial fixes in here and this resolves a merge issue in
the 8250 driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge branch 'mlx5_active_speed' into rdma.git for-next

Leon Romanovsky says:

====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaratio

Merge branch 'mlx5_active_speed' into rdma.git for-next

Leon Romanovsky says:

====================
IBTA declares speed as 16 bits, but kernel stores it in u8. This series
fixes in-kernel declaration while keeping external interface intact.
====================

Based on the mlx5-next branch at
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
due to dependencies.

* branch 'mlx5_active_speed':
RDMA: Fix link active_speed size
RDMA/mlx5: Delete duplicated mlx5_ptys_width enum
net/mlx5: Refactor query port speed functions

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily

Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
mfd: Support ROHM BD9576MUF and BD9573MUF
wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
regulator: Support ROHM BD9576MUF and BD9573MUF
MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

.../bindings/mfd/rohm,bd9576-pmic.yaml | 129 +++++++
.../regulator/rohm,bd9576-regulator.yaml | 33 ++
MAINTAINERS | 4 +
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/rohm-bd9576.c | 130 +++++++
drivers/regulator/Kconfig | 10 +
drivers/regulator/Makefile | 1 +
drivers/regulator/bd9576-regulator.c | 337 ++++++++++++++++++
drivers/watchdog/Kconfig | 13 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/bd9576_wdt.c | 295 +++++++++++++++
include/linux/mfd/rohm-bd957x.h | 61 ++++
include/linux/mfd/rohm-generic.h | 2 +
14 files changed, 1028 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
create mode 100644 drivers/mfd/rohm-bd9576.c
create mode 100644 drivers/regulator/bd9576-regulator.c
create mode 100644 drivers/watchdog/bd9576_wdt.c
create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

show more ...

Merge drm/drm-next into drm-misc-next

Paul Cercueil needs some patches in -rc5 to apply new patches for ingenic
properly.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge 5.9-rc5 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.9-rc5 into driver-core-next

We need the driver core changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.9-rc5 into char-misc-next

We want the char/misc fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.9-rc5 into staging-next

We want the staging/iio changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge drm/drm-next into drm-intel-next-queued

Sync drm-intel-gt-next here so we can have an unified fixes flow.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge branch 'kvm-arm64/pt-new' into kvmarm-master/next

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge tag 'v5.9-rc4' into next

Linux 5.9-rc4

Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from Viresh Kumar <viresh.kumar@linaro.org>:

Hello,

This cleans up some of the user code around calls to
dev_pm_opp_of_remove_t

Merge series "opp: Unconditionally call dev_pm_opp_of_remove_table()" from Viresh Kumar <viresh.kumar@linaro.org>:

Hello,

This cleans up some of the user code around calls to
dev_pm_opp_of_remove_table().

All the patches can be picked by respective maintainers directly except
for the last patch, which needs the previous two to get merged first.

These are based for 5.9-rc1.

Rajendra, Since most of these changes are related to qcom stuff, it
would be great if you can give them a try. I wasn't able to test them
due to lack of hardware.

Ulf, I had to revise the sdhci patch, sorry about that. Please pick this
one.

Diff between V1 and V2 is mentioned in each of the patches separately.

Viresh Kumar (8):
cpufreq: imx6q: Unconditionally call dev_pm_opp_of_remove_table()
drm/lima: Unconditionally call dev_pm_opp_of_remove_table()
drm/msm: Unconditionally call dev_pm_opp_of_remove_table()
mmc: sdhci-msm: Unconditionally call dev_pm_opp_of_remove_table()
spi: spi-geni-qcom: Unconditionally call dev_pm_opp_of_remove_table()
spi: spi-qcom-qspi: Unconditionally call dev_pm_opp_of_remove_table()
tty: serial: qcom_geni_serial: Unconditionally call
dev_pm_opp_of_remove_table()
qcom-geni-se: remove has_opp_table

drivers/cpufreq/imx6q-cpufreq.c | 10 ++--------
drivers/gpu/drm/lima/lima_devfreq.c | 6 +-----
drivers/gpu/drm/lima/lima_devfreq.h | 1 -
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 14 +++++---------
drivers/gpu/drm/msm/disp/dpu1/dpu_kms.h | 1 -
drivers/gpu/drm/msm/dsi/dsi_host.c | 8 ++------
drivers/mmc/host/sdhci-msm.c | 14 +++++---------
drivers/spi/spi-geni-qcom.c | 13 +++++--------
drivers/spi/spi-qcom-qspi.c | 15 ++++++---------
drivers/tty/serial/qcom_geni_serial.c | 13 +++++--------
include/linux/qcom-geni-se.h | 2 --
11 files changed, 31 insertions(+), 66 deletions(-)

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.25.0.rc1.19.g042ed3e048af

show more ...

Merge tag 'v5.9-rc4' into drm-next

Backmerge 5.9-rc4 as there is a nasty qxl conflict
that needs to be resolved.

Signed-off-by: Dave Airlie <airlied@redhat.com>