Merge branch 'next' into for-linus

Prepare input updates for 5.8 merge window.

Merge branch 'for-5.8' into for-linus

Merge tag 'v5.6' into next

Sync up with mainline to get device tree and other changes.

Merge branch 'for-5.7/appleir' into for-linus

- small code cleanups in hid-appleir from Lucas Tanure

Merge branch 'x86/kdump' into locking/kcsan, to resolve conflicts

Conflicts:
arch/x86/purgatory/Makefile

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently lan

Merge drm/drm-next into drm-intel-next-queued

Some DSI and VBT pending patches from Hans will apply
cleanly and with less ugly conflicts if they are rebuilt
on top of other patches that recently landed on drm-next.

Reference: https://patchwork.freedesktop.org/series/70952/
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com

show more ...

Merge tag 'v5.6-rc3' into sched/core, to pick up fixes and dependent patches

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge drm-intel-next-queued into gvt-next

Backmerge to pull in
https://patchwork.freedesktop.org/patch/353621/?series=73544&rev=1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tec

Merge v5.6-rc2 into drm-misc-next

Lyude needs some patches in 5.6-rc2 and we didn't bring drm-misc-next
forward yet, so it looks like a good occasion.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

show more ...

Merge tag 'v5.5-rc4' into locking/kcsan, to resolve conflicts

Conflicts:
init/main.c
lib/Kconfig.debug

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge v5.6-rc1 into drm-misc-fixes

We're based on v5.6, need v5.6-rc1 at least. :)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge branch 'next' into for-linus

Prepare input updates for 5.6 merge window.

Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS changes from Paul Burton:
"Nothing too big or scary in here:

- Support mremap() for the VDSO, primaril

Merge tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS changes from Paul Burton:
"Nothing too big or scary in here:

- Support mremap() for the VDSO, primarily to allow CRIU to restore
the VDSO to its checkpointed location.

- Restore the MIPS32 cBPF JIT, after having reverted the enablement
of the eBPF JIT for MIPS32 systems in the 5.5 cycle.

- Improve cop0 counter synchronization behaviour whilst onlining CPUs
by running with interrupts disabled.

- Better match FPU behaviour when emulating multiply-accumulate
instructions on pre-r6 systems that implement IEEE754-2008 style
MACs.

- Loongson64 kernels now build using the MIPS64r2 ISA, allowing them
to take advantage of instructions introduced by r2.

- Support for the Ingenic X1000 SoC & the really nice little CU Neo
development board that's using it.

- Support for WMAC on GARDENA Smart Gateway devices.

- Lots of cleanup & refactoring of SGI IP27 (Origin 2*) support in
preparation for introducing IP35 (Origin 3*) support.

- Various Kconfig & Makefile cleanups"

* tag 'mips_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (60 commits)
MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel
MIPS: Loongson64: Disable exec hazard
MIPS: Loongson64: Bump ISA level to MIPSR2
MIPS: Make DIEI support as a config option
MIPS: OCTEON: octeon-irq: fix spelling mistake "to" -> "too"
MIPS: asm: local: add barriers for Loongson
MIPS: Loongson64: Select mac2008 only feature
MIPS: Add MAC2008 Support
Revert "MIPS: Add custom serial.h with BASE_BAUD override for generic kernel"
MIPS: sort MIPS and MIPS_GENERIC Kconfig selects alphabetically (again)
MIPS: make CPU_HAS_LOAD_STORE_LR opt-out
MIPS: generic: don't unconditionally select PINCTRL
MIPS: don't explicitly select LIBFDT in Kconfig
MIPS: sync-r4k: do slave counter synchronization with disabled HW interrupts
MIPS: SGI-IP30: Check for valid pointer before using it
MIPS: syscalls: fix indentation of the 'SYSNR' message
MIPS: boot: fix typo in 'vmlinux.lzma.its' target
MIPS: fix indentation of the 'RELOCS' message
dt-bindings: Document loongson vendor-prefix
MIPS: CU1000-Neo: Refresh defconfig to support HWMON and WiFi.
...

show more ...

MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel

Add detection for IOC3 chips in IP35 machines.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paul

MIPS: PCI: Add detection of IOC3 on IO7, IO8, IO9 and Fuel

Add detection for IOC3 chips in IP35 machines.

Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org

show more ...

Merge tag 'v5.5-rc5' into next

Sync up with mainline to get SPI "delay" API changes.

MIPS: SGI-IP27: fix readb/writeb addressing

Our chosen byte swapping, which is what firmware already uses, is to
do readl/writel by normal lw/sw intructions (data invariance). This
also means we nee

MIPS: SGI-IP27: fix readb/writeb addressing

Our chosen byte swapping, which is what firmware already uses, is to
do readl/writel by normal lw/sw intructions (data invariance). This
also means we need to mangle addresses for u8 and u16 accesses. The
mangling for 16bit has been done aready, but 8bit one was missing.
Correcting this causes different addresses for accesses to the
SuperIO and local bus of the IOC3 chip. This is fixed by changing
byte order in ioc3 and m48rtc_rtc structs.

Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: linux-mips@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-rtc@vger.kernel.org

show more ...

Merge drm/drm-next into drm-misc-next

Requested, and we need v5.5-rc1 backported as our current branch is still based on v5.4.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kern

Merge drm/drm-next into drm-intel-next-queued

Sync up with v5.5-rc1 to get the updated lock_release() API among other
things. Fix the conflict reported by Stephen Rothwell [1].

[1] http://lore.kernel.org/r/20191210093957.5120f717@canb.auug.org.au

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johans

Merge mainline/master into arm/fixes

This brings in the mainline tree right after armsoc contents was merged
this release cycle, so that we can re-run savedefconfig, etc.

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up BPF changes we'll need.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
"The main MIPS changes for 5.5:

- Atomics-related code sees some rework & cl

Merge tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Paul Burton:
"The main MIPS changes for 5.5:

- Atomics-related code sees some rework & cleanup, most notably
allowing Loongson LL/SC errata workarounds to be more bulletproof &
their correctness to be checked at build time.

- Command line setup code is simplified somewhat, resolving various
corner cases.

- MIPS kernels can now be built with kcov code coverage support.

- We can now build with CONFIG_FORTIFY_SOURCE=y.

- Miscellaneous cleanups.

And some platform specific changes:

- We now disable some broken TLB functionality on certain Ingenic
systems, and JZ4780 systems gain some devicetree nodes to support
more devices.

- Loongson support sees a number of cleanups, and we gain initial
support for Loongson 3A R4 systems.

- We gain support for MediaTek MT7688-based GARDENA Smart Gateway
systems.

- SGI IP27 (Origin 2*) see a number of fixes, cleanups &
simplifications.

- SGI IP30 (Octane) systems are now supported"

* tag 'mips_5.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (107 commits)
MIPS: SGI-IP27: Enable ethernet phy on second Origin 200 module
MIPS: PCI: Fix fake subdevice ID for IOC3
MIPS: Ingenic: Disable abandoned HPTLB function.
MIPS: PCI: remember nasid changed by set interrupt affinity
MIPS: SGI-IP27: Fix crash, when CPUs are disabled via nr_cpus parameter
mips: add support for folded p4d page tables
mips: drop __pXd_offset() macros that duplicate pXd_index() ones
mips: fix build when "48 bits virtual memory" is enabled
MIPS: math-emu: Reuse name array in debugfs_fpuemu()
MIPS: allow building with kcov coverage
MIPS: Loongson64: Drop setup_pcimap
MIPS: Loongson2ef: Convert to early_printk_8250
MIPS: Drop CPU_SUPPORTS_UNCACHED_ACCELERATED
MIPS: Loongson{2ef, 32, 64} convert to generic fw cmdline
MIPS: Drop pmon.h
MIPS: Loongson: Unify LOONGSON3/LOONGSON64 Kconfig usage
MIPS: Loongson: Rename LOONGSON1 to LOONGSON32
MIPS: Loongson: Fix return value of loongson_hwmon_init
MIPS: add support for SGI Octane (IP30)
MIPS: PCI: make phys_to_dma/dma_to_phys for pci-xtalk-bridge common
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.5 merge window.

Merge tag 'v5.4-rc8' into WIP.x86/mm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/hyperv

Pick up upstream fixes to avoid conflicts.

Merge tag 'v5.4-rc5' into next

Sync up with mainline.