Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Sync with upstream (which now contains fbdev-v4.19 changes) to
prepare a base for fbdev-v4

Merge tag 'v4.19-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Sync with upstream (which now contains fbdev-v4.19 changes) to
prepare a base for fbdev-v4.20 changes.

show more ...

arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs

Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA
connectors, and wire up the display-related nodes with clocks, pinm

arm64: dts: renesas: r8a77990: ebisu: Enable VGA and HDMI outputs

Add the LVDS decoder, HDMI encoder, VGA encoder and HDMI and VGA
connectors, and wire up the display-related nodes with clocks, pinmux
and regulators.

The LVDS0 and LVDS1 encoders can use the DU_DOTCLKIN0, DU_DOTCLKIN1 and
EXTAL externals clocks. Two of them are provided to the SoC on the Ebisu
board, hook them up in DT.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Tested-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up in general, and get DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT
specifically.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.20

* Correct whitespace around assignm

Merge tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.20

* Correct whitespace around assignments

* R-Car Gen-3 SoCs:
- Enable SDR104 for SD devices
- Include R-Car product name in DTSI files to ease maintenance
* R-Car Gen-3 SoC based boards: Convert to new LVDS DT bindings
* R-Car Gen 3 Salvator-X and Salvator-XS boards:
- Override secondary addresses of ADV748x to avoid address conflicts
* R-Car Gen 3 based Salvator-XS board: Enable SATA

* R-Car M3-N (r8a77965) SoC:
- Add FDP1 device nodes
- Move arm_cc630p and timer nodes to restore sort-order of file
- Correct clock/reset for usb2_phy1
- Correct HS-USB compat string
- Add OPPs table for cpu devices enabling CPUFreq support
- Add CAN device placeholder nodes to facilitate adding
initial device tree for KF daughter board
- Attach SYS-DMAC to the IPMMU
* R-Car M3-N (r8a77965) based ULCB board:
- Initial device tree for board and KF daughter board

* R-Car E3 (r8a77990) SoC:
- Add SYS-DMAC, I2C VIN, CSI-2, MSIOF device nodes
- Add BRG support to SCIF2 which allows an increase in serial clock accuracy
- Use CPG/MSSR and SYSC binding definitions
* R-Car E3 (r8a77990) based Ebisu board: Enable PWM

* R-Car D3 (r8a77995) SoC: Attach the SYS-DMAC to the IPMMU
* R-Car D3 (r8a77995) based Draak board: Sort device nodes

* R-Car V3H (r8a77980) based V3HSK board:
- Move lvds0 node to restore sort-order of file
* R-Car V3H (r8a77980) SoC:
- Add RWDT, CSI2 and VIN, Cortex-A53 PMU nodes
- Move IPMMU and CAN clock nodes to restore sort-order of file

* R-Car V3M (r8a77970) SoC:
- Add MMC nodes
- Move CAN clock node to restore sort-order of file
* R-Car V3M (r8a77970) based V3MSK board: Add eMMC support
* R-Car V3H (r8a77980) based Condor board: Add PCIe, DU, LVDS and HDMI support

* RZ/G2M (r8a774a1) SoC:
- Initial device tree
- Add SYS-DMAC, SCIF, HSCIF, INTC-EX, EtherAVB, RWDT, pinctl, GPIO,
SDHI, I2C, IIC-DVFS, thermal, IPMMU, MSIOF, Cortex-A53 CPU core,
PWM, Audio, FCPF, FCPV, USB2.0, USB-DMAC, HSUSB and USB3.0 device nodes

* tag 'renesas-arm64-dt-for-v4.20' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (58 commits)
arm64: dts: r8a77965: add FDP1 device nodes
arm64: dts: renesas: draak: Sort device nodes
arm64: dts: renesas: enable SDR104 on R-Car Gen3
arm64: dts: renesas: r8a77990: Add SYS-DMAC device nodes
arm64: dts: renesas: r8a77990: Add I2C device nodes
arm64: dts: renesas: r8a77990: Add VIN and CSI-2 device nodes
arm64: dts: renesas: r8a77990: Add all MSIOF nodes
arm64: dts: renesas: r8a7795: Move arm_cc630p node
arm64: dts: renesas: r8a77990: Add BRG support to SCIF2
arm64: dts: renesas: r8a77990: Use CPG/MSSR and SYSC binding definitions
arm64: dts: renesas: salvator-xs: Improve SATA switch settings comments
arm64: dts: renesas: r8a77965: Fix clock/reset for usb2_phy1
arm64: dts: renesas: r8a77965: Fix HS-USB compatible
arm64: dts: renesas: r8a77965: Move timer node
arm64: dts: renesas: v3hsk: Move lvds0 node
arm64: dts: renesas: Fix whitespace around assignments
arm64: dts: renesas: r8a77965: m3nulcb-kf: Initial device tree
arm64: dts: renesas: condor: add PCIe support
arm64: dts: renesas: r8a77980: add PCIe support
arm64: dts: renesas: r8a774a1: Add USB3.0 device nodes
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: ebisu: Add HDMI and CVBS input

Add HDMI and CVBS inputs device nodes to R-Car E3 Ebisu board.

Both HDMI and CVBS inputs are connected to an ADV7482 video decoder hooked to
the

arm64: dts: renesas: ebisu: Add HDMI and CVBS input

Add HDMI and CVBS inputs device nodes to R-Car E3 Ebisu board.

Both HDMI and CVBS inputs are connected to an ADV7482 video decoder hooked to
the SoC CSI-2 receiver port.

Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of syst

Merge tag 'y2038' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/playground into timers/core

Pull more y2038 work from Arnd Bergman:

y2038: convert more syscalls

Here is another set of system call changes to prepare the change over to
64-bit time_t. As before, the strategy is to change system calls that
take a 'struct timespec' argument over to 'struct __kernel_timespec',
which for now is defined to be the same but will get redefined to use a
64-bit time_t argument once we are ready to modify the system call tables.

The major change from previous patches is that the plan is no longer
to directly use the 'compat' system calls for providing compatibility
with the existing 32-bit time_t based entry points. Instead, we rename
the compat code to something that makes more sense on 32-bit architectures,
e.g. compat_timespec becomes old_timespec32.

With the renamed types in place, change over the 'stat' and 'utimes'
families of system calls, sched_rr_get_interval, recvmmsg and
rt_sigtimedwait. Another series for poll, select and io_pgetevents is
currently being tested.

show more ...

arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

This patch adds PWM device nodes and enables PWM3 and PWM5 for
R-Car E3 Ebisu board. These devices are used for backlight control.

Signed-o

arm64: dts: renesas: r8a77990: Enable PWM for Ebisu board

This patch adds PWM device nodes and enables PWM3 and PWM5 for
R-Car E3 Ebisu board. These devices are used for backlight control.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'v4.19-rc2' into next-general

Sync to Linux 4.19-rc2 for downstream developers.

Merge tag 'v4.19-rc1' into asoc-4.19

Linux 4.19-rc1

Merge branch 'perm-fix' into omap-for-v4.19/fixes-v2

Merge drm/drm-next into drm-misc-next

Now that 4.19-rc1 is cut, backmerge it into -misc-next.

Signed-off-by: Sean Paul <seanpaul@chromium.org>

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.

New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).

New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop

In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...

show more ...

Merge branch 'for-4.19/cougar' into for-linus

New device support for hid-cougar

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_bl

Merge branch 'iomap-write' into linux-gfs2/for-next

Pull in the gfs2 iomap-write changes: Tweak the existing code to
properly support iomap write and eliminate an unnecessary special case
in gfs2_block_map. Implement iomap write support for buffered and
direct I/O. Simplify some of the existing code and eliminate code that
is no longer used:

gfs2: Remove gfs2_write_{begin,end}
gfs2: iomap direct I/O support
gfs2: gfs2_extent_length cleanup
gfs2: iomap buffered write support
gfs2: Further iomap cleanups

This is based on the following changes on the xfs 'iomap-4.19-merge'
branch:

iomap: add private pointer to struct iomap
iomap: add a page_done callback
iomap: generic inline data handling
iomap: complete partial direct I/O writes synchronously
iomap: mark newly allocated buffer heads as new
fs: factor out a __generic_write_end helper

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.

Merge drm/drm-next into drm-intel-next-queued

We need a backmerge to get DP_DPCD_REV_14 before we push other
i915 changes to dinq that could break compilation.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

show more ...

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Re

Merge tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Second Round of Renesas ARM64 Based SoC DT Updates for v4.19

Corrections:

* Remove non-existing STBE region from Ether-AVB node in DT of
R-Car E3 (r8a77990) SoC

Cleanups:

* Consistently use rwdt as label for Renesas Watchdog Timer devices
* Add second port to rcar_sound placeholder in DT of R-Car M3-N (r8a77965) SoC
* Fix adv7482 decimal unit addresses in DT of Salvator-X and -XS boards

Enhancements:

* Describe in DT:
- INTC-EX of R-Car V3H (r8a77980) SoC
- USB3.0 of R-Car E3 (r8a77980) SoC
- All SCIF and HSCIF devices of R-Car D3 (r8a77995) SoC.
Previously only SCIF2, used as the debug consile, was described.
- All IPMMU devicesof R-Car M3-N (r8a77965), V3H (r8a77980) and
E3 (r8a77990) SoCs
* Enable USB3.0 in DT of R-Car E3 (r8a77980) based Ebisu board
* Prefer HSCIF1 over SCIF1 in DT of Salvator-X and -XS boards

* tag 'renesas-arm64-dt2-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: r8a77980: add INTC-EX support
arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board
arm64: dts: renesas: r8a77995: Add SCIF {0,1,3,4,5} and all HSCIF device nodes
arm64: dts: renesas: r8a779{65,80,90}: Add IPMMU devices nodes
arm64: dts: renesas: Unify the labels for RWDT
arm64: dts: renesas: salvator-common: Prefer HSCIF1 over SCIF1
arm64: dts: renesas: r8a77965: Add second port to rcar_sound placeholder
arm64: dts: renesas: salvator-common: Fix adv7482 decimal unit addresses
arm64: dts: renesas: r8a77990: Remove non-existing STBE region

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shi

arm64: dts: renesas: r8a77990: Enable USB3.0 host for Ebisu board

This patch adds and USB3.0 host device node and enable it for
R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs

Merge tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Renesas ARM64 Based SoC DT Updates for v4.19

* All applicable R-Car Gen 3 SoCs
- Correct VSPD registers range
- Convert R-Car Gen3 SoC and board DT files to SPDX identifiers

* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Salvator-X and Salvator-XS boards
+ Describe HSCIF1 device
+ Correct I2C ch4 clock to 400kHz
- Salvator-X, Salvator-XS and ULCB boards
+ Add sdhi2_ds pin group to SDHI2 pinctrl groups

* R-Car H3 (r8a7795) SoC
- Describe CryptoCAL (CCREE) device

* R-Car M3-W (r8a7796) SoC
- Describe PCIe devices
- Describe HSCIF nodes

* R-Car M3-N (r8a77965) SoC
- Describe PCIe devices
- Use CPG MSSR symbols instead of numeric indicies

* R-Car D3 (r8a77995) SoC
- Describe Thermal device
- Describe MSIOF devices
- Add power domains to description of IPMMU devices
- Do not use deprecated renesas,gpio-rcar compat string
- Describe HDMI and CVBS input in DT of R-Car Gen3 D3 Draak board

* R-Car V3H (r8a77980) SoC
- Describe secondary CA53 CPU cores, and GPIO and
interconected FCPVD0, VSPD0, DU, and LVDS0 devices
- Enable ethernet on V3HSK board
- Specify Ethernet PHY IRQs in the DT of the Condor and V3HSK boards.
This is possible now that GPIO support is present.
Previously phylib had to resort to polling.
- Enable I2C0 on Condor board

* R-Car E3 (r8a77990)
- Enable Watchdog timer and USB2.0 host on Ebisu board
- Enable secondary CA53 CPU core

* tag 'renesas-arm64-dt-for-v4.19' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (29 commits)
arm64: dts: renesas: r8a77995: Add MSIOF device nodes
arm64: dts: renesas: salvator-common: Add HSCIF1 device support
arm64: dts: renesas: r8a77980: add FCPVD/VSPD/DU/LVDS support
arm64: dts: renesas: condor/v3hsk: specify Ethernet PHY IRQs
arm64: dts: renesas: r8a77965: Add PCIe device nodes
arm64: dts: renesas: Fix VSPD registers range
arm64: dts: renesas: convert to SPDX identifiers
arm64: dts: renesas: r8a77980: add GPIO support
arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board
arm64: dts: renesas: r8a7796: Add PCIe device nodes
arm64: dts: renesas: r8a77990: Add secondary CA53 CPU core
arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer
arm64: dts: renesas: condor: add I2C0 support
arm64: dts: renesas: r8a77980: add I2C support
arm64: dts: renesas: salvator-x(s): Update I2C ch4 clock to 400kHz
arm64: dts: renesas: Add sdhi2_ds pin group to SDHI2 pinctrl groups
arm64: dts: renesas: r8a77965: Add all HSCIF nodes
arm64: dts: renesas: r8a77965: Use r8a77965-cpg-mssr binding definitions
arm64: dts: renesas: r8a7795: add ccree to device tree
arm64: dts: renesas: r8a77965: Add Watchdog Timer controller node using RCLK Watchdog Timer
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'v4.18-rc2' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.18-rc2

Merge tag 'v4.18-rc2' into next-general

Merge to Linux 4.18-rc2 for security subsystem developers.

arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board

This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and
enables them for R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <y

arm64: dts: renesas: r8a77990: Enable USB2.0 Host for Ebisu board

This patch adds USB2.0 PHY and Host(EHCI/OHCI) nodes and
enables them for R-Car E3 Ebisu board.

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer

Add a device node for the Watchdog Timer (WDT) controller on the
R8A77990 SoC, and enable the watchdog on the Ebisu board.

Signed-off-by:

arm64: dts: renesas: r8a77990: ebisu: Enable watchdog timer

Add a device node for the Watchdog Timer (WDT) controller on the
R8A77990 SoC, and enable the watchdog on the Ebisu board.

Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
[geert: Squashed 2 commits]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge branch 'linus' into x86/urgent

Required to queue a dependent fix.

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in l

Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late updates from Olof Johansson:
"This is a branch with a few merge requests that either came in late,
or took a while longer for us to review and merge than usual and thus
cut it a bit close to the merge window. We stage them in a separate
branch and if things look good, we still send them up -- and that's
the case here.

This is mostly DT additions for Renesas platforms, adding IP block
descriptions for existing and new SoCs.

There are also some driver updates for Qualcomm platforms for SMEM/QMI
and GENI, which is their generalized serial protocol interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (186 commits)
soc: qcom: smem: introduce qcom_smem_virt_to_phys()
soc: qcom: qmi: fix a buffer sizing bug
MAINTAINERS: Update pattern for qcom_scm
soc: Unconditionally include qcom Makefile
soc: qcom: smem: check sooner in qcom_smem_set_global_partition()
soc: qcom: smem: fix qcom_smem_set_global_partition()
soc: qcom: smem: fix off-by-one error in qcom_smem_alloc_private()
soc: qcom: smem: byte swap values properly
soc: qcom: smem: return proper type for cached entry functions
soc: qcom: smem: fix first cache entry calculation
soc: qcom: cmd-db: Make endian-agnostic
drivers: qcom: add command DB driver
arm64: dts: renesas: salvator-common: Add ADV7482 support
ARM: dts: r8a7740: Add CEU1
ARM: dts: r8a7740: Add CEU0
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
...

show more ...

Merge tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

Renesas ARM64 Based SoC DT Updates for v4.18

* Cleanups:
- Correct whitespac

Merge tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/late

Renesas ARM64 Based SoC DT Updates for v4.18

* Cleanups:
- Correct whitespace
- sort subnodes of the root and soc nodes
* R-Car M3-N (r8a77965) SoC
- Describe MSIOF SPI, PWM, SDHI and I2C devices in DT
- Add thermal support
* R-Car H3 (r8a7795) and R-Car M3-W (r8a7796) SoCs
- Decrease temperature hysteresis
* R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Add address properties to rcar_sound port nodes
* R-Car H3 (r8a7795), M3-W (r8a7796) V3M (r8a77970) and D3 (r8a77995) SoCs
- Enable IPMMU devices
* R-Car M3-N (r8a77965) and V3H (r8a77980) SoCs
- Use sysc binding macros
- Describe USB2 and USB3 devices in DT
* R-Car V3M (r8a77970) SoC
- Add SMP Support
- Correct IPMMU DS1 bit number
* R-Car V3H (r8a77980) SoC
- Use CPG clock binding macros
* R-Car V3H (r8a77980) and V3M (r8a77970) SoCs
- Disable EtherAVB
* R-Car D3 (r8a77995) SoC
- Describe VIN4 in DT

* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support
* Salvator-XS boards with R-Car H3 (r8a7795) SoC
- Enable USB2.0 channel 3
* Salvator-X and Salvator-XS boards with M3-N (r8a77965) SoC
- Enable DU
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs
- Enable nable VIN, CSI-2 and ADV7482
- Add PMIC DDR Backup Power config
- Add EEPROM
- Enable HDMI Sound
* Salvator-X and Salvator-XS boards with
R-Car H3 (r8a7795), M3-W (r8a7796) and M3-N (r8a77965) SoCs, and
Draak board with R-Car D3 (r8a77995) SoC
- Consistently name EtherAVB mdio pin group
* Ebisu board with R-Car E3 (r8a77990) SoC
- Initial support: Memory, Main crystal, Serial console
- Enable Ethernet
- Revise PSCI node
- Revise cache controller node
* V3HSK board with R-Car V3H (r8a77980) SoC
- Initial board device tree
- Enable PFC support and use for EtherAVB
* V3MSK board with R-Car V3M (r8a77970) SoC
- Add DU/LVDS/HDMI support
- Enable PFC for EtherAVB
* Condor board with R-Car V3H (r8a77980) SoC
- Enable eMMC
- Enable PFC support and use for EtherAVB and SCIF0
* Eagle board with R-Car V3M (r8a77970) SoC
- Enable HDMI output
* Eagle board with R-Car V3M (r8a77970) SoC and
Condor board with R-Car V3H (r8a77980) SoC
- Enable CAN-FD

* tag 'renesas-arm64-dt-for-v4.18' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits)
arm64: dts: renesas: salvator-common: Add ADV7482 support
arm64: dts: renesas: salvator-common: enable VIN
arm64: dts: renesas: r8a77970: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7796: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a7795-es1: add CSI-2 node
arm64: dts: renesas: r8a7795: add VIN and CSI-2 nodes
arm64: dts: renesas: r8a77965: add I2C support
arm64: dts: renesas: r8a77990: ebisu: Enable EthernetAVB
arm64: dts: renesas: r8a77990: Add EthernetAVB device nodes
arm64: dts: renesas: r8a77990: Add GPIO device nodes
arm64: dts: renesas: r8a77990: Add PFC device node
arm64: dts: renesas: initial V3HSK board device tree
arm64: dts: renesas: r8a77980: disable EtherAVB
arm64: dts: renesas: r8a77970: disable EtherAVB
arm64: dts: renesas: r8a77995: Add VIN4
arm64: dts: renesas: r8a77980: add resets property to CAN-FD node
arm64: dts: renesas: r8a77970: Add Cortex-A53 PMU node
arm64: dts: renesas: r8a77970: Add secondary CA53 CPU core
arm64: dts: renesas: r8a77965: Add SDHI device nodes
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...