Merge tag 'v5.11-rc1' into spi-5.11

Linux 5.11-rc1

Merge tag 'v5.11-rc1' into regulator-5.11

Linux 5.11-rc1

Merge tag 'v5.11-rc1' into asoc-5.11

Linux 5.11-rc1

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up fixes and check what UAPI headers need to be synched.

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT sch

Merge tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM device tree updates from Arnd Bergmann:
"Across all platforms, there is a continued move towards DT schema for
validating the dts files. As a result there are bug fixes for mistakes
that are found using these schema, in addition to warnings from the
dtc compiler.

As usual, many changes are for adding support for additional on-chip
and on-board components in the machines we already support.

The newly supported SoCs for this release are:

- MStar Infinity2M, a low-end IP camera chip based on a dual-core
Cortex-A7, otherwise similar to the Infinity chip we already
support. This is also known as the SigmaStar SSD202D, and we add
support for the Honestar ssd201htv2 development kit.

- Nuvoton NPCM730, a Cortex-A9 based Baseboard Management Controller
(BMC), in the same family as the NPCM750. This gets used in the
Ampere Altra based "Fii Kudo" server and the Quanta GSJ, both of
which are added as well.

- Broadcom BCM4908, a 64-bit home router chip based on Broadcom's own
Brahma-B53 CPU. Support is also added for the Asus ROG Rapture
GT-AC5300 high-end WiFi router based on this chip.

- Mediatek MT8192 is a new SoC based on eight Cortex-A76/A55 cores,
meant for faster Chromebooks and tablets. It gets added along with
its reference design.

- Mediatek MT6779 (Helio P90) is a high-end phone chip from last
year's generation, also added along with its reference board. This
one is still based on Cortex-A75/A55.

- Mediatek MT8167 is a version of the already supported MT8516 chip,
both based on Cortex-A35. It gets added along with the "Pumpkin"
single board computer, but is likely to also make its way into
low-end tablets in the future.

For the already supported chips, there are a number of new boards.
Interestingly there are more 32-bit machines added this time than
64-bit. Here is a brief list of the new boards:

- Three new Mikrotik router variants based on Marvell Prestera
98DX3236, a close relative of the more common Armada XP

- A reference board for the Marvell Armada 382

- Three new servers using ASpeed baseboard management controllers,
the actual machines being from Bytedance, Facebook and IBM, and one
machine using the Nuvoton NPCM750 BMC.

- The Galaxy Note 10.1 (P4) tablet, using an Exynos 4412.

- The usual set of 32-bit i.MX industrial/embedded hardware:
* Protonic WD3 (tractor e-cockpit)
* Kamstrup OMNIA Flex Concentrator (smart grid platform)
* Van der Laan LANMCU (food storage)
* Altesco I6P (vehicle inspection stations)
* PHYTEC phyBOARD-Segin/phyCORE-i.MX6UL baseboard

- DH electronics STM32MP157C DHCOM, a PicoITX carrier board for the
aleady supported DHCOM module

- Three new Allwinner SoC based single-board computers:
* NanoPi R1 (H3 based)
* FriendlyArm ZeroPi (H3 based)
* Elimo Initium SBC (S3 based)

- Ouya Game Console based on Nvidia Tegra 3

- Version 5 of the already supported Zynq Z-Turn MYIR Board

- LX2162AQDS, a reference platform for NXP Layerscape LX2162A, which
is a repackaged 16-core LX2160A

- A series of Kontron i.MX8M Mini baseboard/SoM versions

- Espressobin Ultra, a new variant of the popular Armada 3700 based
board,

- IEI Puzzle-M801, a rackmount network appliance based on Marvell
Armada 8040

- Microsoft Lumia 950 XL, a phone

- HDK855 and HDK865 Hardware development kits for Qualcomm sm8250 and
sm8150, respectively

- Three new board variants of the "Trogdor" Chromebook (sc7180)

- New board variants of the Renesas based "Kingfisher" and "HiHope"
reference boards

- Kobol Helios64, an open source NAS appliance based on Rockchips
RK3399

- Engicam PX30.Core, a SoM based on Rockchip PX30, along with a few
carrier boards"

* tag 'arm-soc-dt-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (679 commits)
arm64: dts: sparx5: Add SGPIO devices
arm64: dts: sparx5: Add reset support
dt-bindings: gpio: Add a binding header for the MSC313 GPIO driver
ARM: mstar: SMP support
ARM: mstar: Wire up smpctrl for SSD201/SSD202D
ARM: mstar: Add smp ctrl registers to infinity2m dtsi
ARM: mstar: Add dts for Honestar ssd201htv2
ARM: mstar: Add chip level dtsi for SSD202D
ARM: mstar: Add common dtsi for SSD201/SSD202D
ARM: mstar: Add infinity2m support
dt-bindings: mstar: Add Honestar SSD201_HT_V2 to mstar boards
dt-bindings: vendor-prefixes: Add honestar vendor prefix
dt-bindings: mstar: Add binding details for mstar,smpctrl
ARM: mstar: Fill in GPIO controller properties for infinity
ARM: mstar: Add gpio controller to MStar base dtsi
ARM: zynq: Fix incorrect reference to XM013 instead of XM011
ARM: zynq: Convert at25 binding to new description on zc770-xm013
ARM: zynq: Fix OCM mapping to be aligned with binding on zc702
ARM: zynq: Fix leds subnode name for zc702/zybo-z7
ARM: zynq: Rename bus to be align with simple-bus yaml
...

show more ...

Merge branch 'for-5.11/elecom' into for-linus

- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma

Merge branch 'next' into for-linus

Prepare input updates for 5.11 merge window.

Merge remote-tracking branch 'spi/for-5.10' into spi-linus

Merge remote-tracking branch 'asoc/for-5.10' into asoc-linus

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core

* for-next/kvm-build-fix:
: Fix KVM build issues with 64K pages
KVM: arm64: Fix build error in user_mem_abort()

* for-next/va-refactor:
: VA layout changes
arm64: mm: don't assume struct page is always 64 bytes
Documentation/arm64: fix RST layout of memory.rst
arm64: mm: tidy up top of kernel VA space
arm64: mm: make vmemmap region a projection of the linear region
arm64: mm: extend linear region for 52-bit VA configurations

* for-next/lto:
: Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO
arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y
arm64: alternatives: Remove READ_ONCE() usage during patch operation
arm64: cpufeatures: Add capability for LDAPR instruction
arm64: alternatives: Split up alternative.h
arm64: uaccess: move uao_* alternatives to asm-uaccess.h

* for-next/mem-hotplug:
: Memory hotplug improvements
arm64/mm/hotplug: Ensure early memory sections are all online
arm64/mm/hotplug: Enable MEM_OFFLINE event handling
arm64/mm/hotplug: Register boot memory hot remove notifier earlier
arm64: mm: account for hotplug memory when randomizing the linear region

* for-next/cppc-ffh:
: Add CPPC FFH support using arm64 AMU counters
arm64: abort counter_read_on_cpu() when irqs_disabled()
arm64: implement CPPC FFH support using AMUs
arm64: split counter validation function
arm64: wrap and generalise counter read functions

* for-next/pad-image-header:
: Pad Image header to 64KB and unmap it
arm64: head: tidy up the Image header definition
arm64/head: avoid symbol names pointing into first 64 KB of kernel image
arm64: omit [_text, _stext) from permanent kernel mapping

* for-next/zone-dma-default-32-bit:
: Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4)
of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS
mm: Remove examples from enum zone_type comment
arm64: mm: Set ZONE_DMA size based on early IORT scan
arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
of: unittest: Add test for of_dma_get_max_cpu_address()
of/address: Introduce of_dma_get_max_cpu_address()
arm64: mm: Move zone_dma_bits initialization into zone_sizes_init()
arm64: mm: Move reserve_crashkernel() into mem_init()
arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
arm64: Ignore any DMA offsets in the max_zone_phys() calculation

* for-next/signal-tag-bits:
: Expose the FAR_EL1 tag bits in siginfo
arm64: expose FAR_EL1 tag bits in siginfo
signal: define the SA_EXPOSE_TAGBITS bit in sa_flags
signal: define the SA_UNSUPPORTED bit in sa_flags
arch: provide better documentation for the arch-specific SA_* flags
signal: clear non-uapi flag bits when passing/returning sa_flags
arch: move SA_* definitions to generic headers
parisc: start using signal-defs.h
parisc: Drop parisc special case for __sighandler_t

* for-next/cmdline-extended:
: Add support for CONFIG_CMDLINE_EXTENDED
arm64: Extend the kernel command line from the bootloader
arm64: kaslr: Refactor early init command line parsing

show more ...

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Li

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.

show more ...

Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.11

- Touch screen and OV5640 camera suppor

Merge tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.11

- Touch screen and OV5640 camera support for the iWave RainboW Qseven
board (G21D), and its camera expansion board,
- Support for the AISTARVISION MIPI Adapter V2.1 board connected to
HiHope RZ/G2 boards,
- SPI (MSIOF) support for the R-Car M3-W+ SoC,
- Digital Radio Interface (DRIF) support for the R-Car M3-N SoC,
- Initial support for the R-Car M3-W+ ULCB/Kingfisher board combo,
- Minor fixes and improvements.

* tag 'renesas-arm-dt-for-v5.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: hihope-rev4: Add a comment explaining switch SW2404
arm64: dts: renesas: r8a77961: ulcb-kf: Initial device tree
arm64: dts: renesas: r8a77961: Add CAN{0,1} placeholder nodes
arm64: dts: renesas: beacon-renesom-baseboard: Move connector node out of hd3ss3220 device
arm64: dts: renesas: cat874: Move connector node out of hd3ss3220 device
arm64: dts: renesas: rzg2: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling
arm64: dts: renesas: r8a77965: Add DRIF support
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2N
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2M
arm64: dts: renesas: Add support for MIPI Adapter V2.1 connected to HiHope RZ/G2H
arm64: dts: renesas: aistarvision-mipi-adapter-2.1: Add parent macro for each sensor
arm64: dts: renesas: cat875: Remove rxc-skew-ps from ethernet-phy node
arm64: dts: renesas: hihope-rzg2-ex: Drop rxc-skew-ps from ethernet-phy node
ARM: dts: r8a7742-iwg21d-q7-dbcm-ca: Enable VIN instances
arm64: dts: renesas: r8a77961: Add MSIOF nodes
arm64: dts: renesas: Align GPIO hog names with dtschema
ARM: dts: r8a7742-iwg21d-q7: Add LCD support

Link: https://lore.kernel.org/r/20201113150854.3923885-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling

Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are ty

arm64: dts: renesas: rcar-gen3: Convert EtherAVB to explicit delay handling

Some EtherAVB variants support internal clock delay configuration, which
can add larger delays than the delays that are typically supported by
the PHY (using an "rgmii-*id" PHY mode, and/or "[rt]xc-skew-ps"
properties).

Historically, the EtherAVB driver configured these delays based on the
"rgmii-*id" PHY mode. This was wrong, as these are meant solely for the
PHY, not for the MAC. Hence properties were introduced for explicit
configuration of these delays.

Convert the R-Car Gen3 DTS files from the old to the new scheme:
- Add default "rx-internal-delay-ps" and "tx-internal-delay-ps"
properties to the SoC .dtsi files, to be overridden by board files
where needed,
- Convert board files from "rgmii-*id" PHY modes to "rgmii", adding
the appropriate "rx-internal-delay-ps" and/or "tx-internal-delay-ps"
overrides.

Notes:
- R-Car E3 and D3 do not support TX internal delay handling,
- On R-Car D3, TX internal delay handling must always be enabled,
hence this fixes a bug on Draak,
- On R-Car V3H, RX internal delay handling must always be enabled.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20200819134344.27813-7-geert+renesas@glider.be

show more ...

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kerne

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:

645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")

Since the new code *should* be fine without nesting.

Knock on wood ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with v5.10-rc2 and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'v5.10-rc1' into kvmarm-master/next

Linux 5.10-rc1

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes

Backmerge for 5.10-rc1 to apply one extra APL fix.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.10-rc1' into regulator-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into spi-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
"As usual, most of the changes are to devicetrees.

Besides smaller

Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM Devicetree updates from Olof Johansson:
"As usual, most of the changes are to devicetrees.

Besides smaller fixes, some refactorings and cleanups, some of the new
platforms and chips (or significant features) supported are below:

Broadcom boards:
- Cisco Meraki MR32 (BCM53016-based)
- BCM2711 (RPi4) display pipeline support

Actions Semi boards:
- Caninos Loucos Labrador SBC (S500-based)
- RoseapplePi SBC (S500-based)

Allwinner SoCs/boards:
- A100 SoC with Perf1 board
- Mali, DMA, Cetrus and IR support for R40 SoC

Amlogic boards:
- Libretch S905x CC V2 board
- Hardkernel ODROID-N2+ board

Aspeed boards/platforms:
- Wistron Mowgli (AST2500-based, Power9 OpenPower server)
- Facebook Wedge400 (AST2500-based, ToR switch)

Hisilicon SoC:
- SD5203 SoC

Nvidia boards:
- Tegra234 VDK, for pre-silicon Orin SoC

NXP i.MX boards:
- Librem 5 phone
- i.MX8MM DDR4 EVK
- Variscite VAR-SOM-MX8MN SoM
- Symphony board
- Tolino Shine 2 HD
- TQMa6 SoM
- Y Soft IOTA Orion

Rockchip boards:
- NanoPi R2S board
- A95X-Z2 board
- more Rock-Pi4 variants

STM32 boards:
- Odyssey SOM board (STM32MP157CAC-based)
- DH DRC02 board

Toshiba SoCs/boards:
- Visconti SoC and TPMV7708 board"

* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (638 commits)
ARM: dts: nspire: Fix SP804 users
arm64: dts: lg: Fix SP804 users
arm64: dts: lg: Fix SP805 clocks
ARM: mstar: Fix up the fallout from moving the dts/dtsi files
ARM: mstar: Add mstar prefix to all of the dtsi/dts files
ARM: mstar: Add interrupt to pm_uart
ARM: mstar: Add interrupt controller to base dtsi
ARM: dts: meson8: remove two invalid interrupt lines from the GPU node
arm64: dts: ti: k3-j7200-common-proc-board: Add USB support
arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function
arm64: dts: ti: k3-j7200-main: Add USB controller
arm64: dts: ti: k3-j7200-main.dtsi: Add USB to SERDES lane MUX
arm64: dts: ti: k3-j7200-main: Add SERDES lane control mux
dt-bindings: ti-serdes-mux: Add defines for J7200 SoC
ARM: dts: hisilicon: add SD5203 dts
ARM: dts: hisilicon: fix the system controller compatible nodes
arm64: dts: zynqmp: Fix leds subnode name for zcu100/ultra96 v1
arm64: dts: zynqmp: Remove undocumented u-boot properties
arm64: dts: zynqmp: Remove additional compatible string for i2c IPs
arm64: dts: zynqmp: Rename buses to be align with simple-bus yaml
...

show more ...