#
82851fce |
| 21-Feb-2021 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32
Merge tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC devicetree updates from Arnd Bergmann: "After the last release contained a surprising amount of new 32-bit machines, this time two thirds of the code changes are for 64-bit.
The usual updates to existing files include:
- Device tree compiler warning fixes for Berlin, Renesas, SoCFPGA, nomadik, stm32, Allwinner, TI Keystone
- Support for additional devices on existing machines on Renesas, SoCFPGA, at91, hisilicon, OMAP, Tegra, TI K3, Allwinner, Broadcom, ux500, Mediatek, Marvell Armada, Marvell MMP, ZynqMP, AMLogic, Qualcomm, i.MX, Layerscape, Actions, ASpeed, Toshiba
- Cleanups and minor fixes for Renesas, at91, mstar, ux500, Samsung, stm32, Tegra, Broadcom, Mediatek, Marvell MMP, AMLogic, Qualcomm, i.MX, Rockchip, ASpeed, Zynq
Only three new SoCs this time, but a number of boards across:
Renesas: - Two Beacon EmbeddedWorks boards (RZ/G2H and RZ/G2N based)
Intel SoCFPGA: - eASIC N5X board (N5X)
ST-Ericsson Ux500: - Samsung GT-I9070 (Janice) phone (u8500)
TI OMAP: - MYIR Tech Limited development board (AM335X)
Allwinner/sunxi: - SL631 Action Camera (V3) - PineTab Early Adopter tablet (A64)
Broadcom: - BCM4906 networking chip - Netgear R8000P router (BCM4906)
AMLogic: - Hardkernel ODROID-HC4 development board (SM1) - Beelink GS-King-X TV Box (S922X)
Qualcomm: - Snapdragon 888 / SM8350 high-end phone SoC - Qualcomm SDX55 5G modem as standalone SoC - Snapdragon MTP reference board (SM8350) - Snapdragon MTP reference board (SDX55) - Sony Kitakami phones: Xperia Z3+/Z4/Z5 (APQ8094) - Alcatel Idol 3 phone (MSM8916) - ASUS Zenfone 2 Laser phone (MSM8916) - BQ Aquaris X5 aka Longcheer L8910 phone (MSM8916) - OnePlus6 phone (SDM845) - OnePlus6T phone (SDM845) - Alfa Network AP120C-AC access point (IPQ4018)
NXP i.MX6 (32-bit): - Plymovent BAS base system controller for filter systems (imx6dl) - Protonic MVT industrial touchscreen terminals (imx6dl) - Protonic PRTI6G reference board (imx6ul) - Kverneland UT1, UT1Q, UT1P, TGO agricultural terminals (imx6q/dl/qp)
NXP i.MX8 (64-bit) - Beacon i.MX8M Nano development kit (imx8mn) - Boundary Devices i.MX8MM Nitrogen SBC (imx8mm) - Gateworks Venice i.MX 8M Mini Development Kits (imx8mm) - phyBOARD-Pollux-i.MX8MP (imx8mp) - Purism Librem5 Evergreen phone (imx8mp) - Kontron SMARC-sAL28 system-on-module(imx8mp)
Rockchip: - NanoPi M4B Single-board computer (RK3399) - Radxa Rock Pi E router SBC (RK3328)
ASpeed: - Ampere Mt. Jade, a BMC for an x86 server (AST2500) - IBM Everest, a BMC for a Power10 server (AST2600) - Supermicro x11spi, a BMC for an ARM server (AST2500)
Zynq: - Ebang EBAZ4205, FPGA board (Zynq-7000) - ZynqMP zcu104 revC reference platform (ZynqMP)"
* tag 'arm-dt-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (584 commits) ARM: dts: aspeed: align GPIO hog names with dtschema ARM: dts: aspeed: fix PCA95xx GPIO expander properties on Portwell dt-bindings: spi: zynq: Convert Zynq QSPI binding to yaml arm: dts: visconti: Add DT support for Toshiba Visconti5 GPIO driver ARM: dts: aspeed: ast2600evb: Add enable ehci and uhci ARM: dts: aspeed: mowgli: Add i2c rtc device ARM: dts: aspeed: amd-ethanolx: Enable secondary LPC snooping address dt-bindings: arm: xilinx: Add missing Zturn boards ARM: dts: ebaz4205: add pinctrl entries for switches ARM: dts: add Ebang EBAZ4205 device tree dt-bindings: arm: add Ebang EBAZ4205 board dt-bindings: add ebang vendor prefix ARM: dts: aspeed: Add Everest BMC machine ARM: dts: aspeed: inspur-fp5280g2: Add ipsps1 driver ARM: dts: aspeed: inspur-fp5280g2: Add GPIO line names ARM: dts: aspeed: Add Supermicro x11spi BMC machine ARM: dts: aspeed: g220a: Fix some gpio ARM: dts: aspeed: g220a: Enable ipmb ARM: dts: aspeed: rainier: Add eMMC clock phase compensation ARM: dts: aspeed: Add LCLK to lpc-snoop ...
show more ...
|
#
60c9579a |
| 09-Feb-2021 |
Arnd Bergmann <arnd@arndb.de> |
Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.12:
- New board support: Beacon i.MX8M Nano development kit
Merge tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.12:
- New board support: Beacon i.MX8M Nano development kit, i.MX8MM Nitrogen, Gateworks i.MX 8M Mini Development Kits, phyBOARD-Pollux-i.MX8MP, Librem5 Evergreen. - Update imx8mm-beacon to drop unused clock-names reference, and add more pinctrl states for USDHC1. - Support soc unique ID read with NVMEM on i.MX8M SoCs. - A series from Biwen Li to add interrupt line for RTC device on Layerscape SoCs. - A couple of patch sets to update imx8mq-librem5 support around regulators, RTC, charger, display, etc. - A series from Joakim Zhang to improve i.MX8M FEC device configuration. - A series from Kuldeep Singh to enable flexcan support for LX2160A and LS1028A. - A series from Lucas Stach to update ZII devices around audio, USB, I2C pin configuration and UCS1002 ALERT. - A series from Michael Walle to update Layerscape device trees to use constants in the clockgen phandle, add sl28 variant 1 and enable SATA. - A few patches from Russell King to improve support for a couple of LX2160A boards. - A series from Shengjiu Wang to add more audio support for imx8mn-evk. - Other small and random updates.
* tag 'imx-dt64-5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (71 commits) arm64: dts: imx: Add i.mx8mm nitrogen basic dts support arm64: dts: zii-rmb3: enable RMI4 reduced reporting arm64: dts: zii-ultra: only trigger IRQ on falling edge ucs1002 ALERT pin arm64: dts: zii-ultra: limit USB ports to USB2 speed arm64: dts: zii-ultra: fix i2c pin configuration arm64: dts: zii-ultra: add sound support arm64: dts: ls1028a: Enable flexcan support for LS1028A-RDB/QDS arm64: dts: ls1028a: Update flexcan properties arm64: dts: lx2160a: Add flexcan support arm64: dts: fsl-ls1012a-frdm: add spi-uart device arm64: dts: fsl-ls1012a-rdb: add i2c devices arm64: dts: imx8mn-beacon-som: Enable QSPI on SOM arm64: dts: imx8mn: Add fspi node arm64: dts: Add Librem5 Evergreen arm64: dts: imx8mq-librem5: set regulators boot-on arm64: dts: imx8mq-librem5: enable the LCD panel arm64: dts: imx8mq-librem5: Add LCD_1V8 regulator arm64: dts: imx8mq-librem5: Add usb-c chip as supplier for the charger arm64: dts: imx8mq-librem5: Don't mark buck3 as always on arm64: dts: imx8mq-librem5: Mark charger IRQ as High-Z ...
Link: https://lore.kernel.org/r/20210204120150.26186-5-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
show more ...
|
#
6f30b27c |
| 04-Jan-2021 |
Tim Harvey <tharvey@gateworks.com> |
arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development kits consisting of a GW700x SoM and a Baseboard. Future SoM's such
arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development kits consisting of a GW700x SoM and a Baseboard. Future SoM's such as the GW701x will create additional combinations.
The GW700x SoM contains: - i.MX 8M Mini SoC - LPDDR4 DRAM - eMMC FLASH - Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor) - GbE PHY connected to the i.MX 8M Mini FEC - Power Management IC
The GW71xx Baseboard contains: - 1x MiniPCIe Socket with USB2.0, PCIe, and SIM - 1x RJ45 GbE (i.MX 8M Mini FEC) - I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals - PCIe Clock generator - GPS and accelerometer - 1x USB 2.0 Front Panel connector - wide range power supply
The GW72xx Baseboard contains: - 2x MiniPCIe Socket with USB2.0, PCIe, and SIM - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x) - 1x MicroSD connector - 1x USB 2.0 Front Panel connector - 1x SPI connector - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of: RS232 w/ flow-control, RS485, RS422 - PCIe Clock generator - GPS and accelerometer - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S) - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C - wide range power supply
The GW73xx Baseboard contains: - 3x MiniPCIe Socket with USB2.0, PCIe, and SIM - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x) - 1x MicroSD connector - 1x USB 2.0 Front Panel connector - 1x SPI connector - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of: RS232 w/ flow-control, RS485, RS422 - WiFi/BT - PCIe Clock generator - GPS and accelerometer - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S) - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C - wide range power supply
Signed-off-by: Tim Harvey <tharvey@gateworks.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
show more ...
|