ARM64: dts: meson-gxbb: add I2C nodes

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxbb: add pins for I2C

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxbb: Add SPIFC node

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxbb: add the SDIO pins

This is used to configure the pins of the sd_emmc_a controller to
which an SDIO module is connected (when available).

Signed-off-by: Neil Armstrong <narmst

ARM64: dts: meson-gxbb: add the SDIO pins

This is used to configure the pins of the sd_emmc_a controller to
which an SDIO module is connected (when available).

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: amlogic: add spi nor pins

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver

The Amlogic reference driver uses the "mc_val" devicetree property to
configure the PRG_ETHERNET_ADDR0 register. Unfortunately it uses magi

ARM64: dts: meson-gxbb: use the new GXBB DWMAC glue driver

The Amlogic reference driver uses the "mc_val" devicetree property to
configure the PRG_ETHERNET_ADDR0 register. Unfortunately it uses magic
values for this configuration.
According to the datasheet the PRG_ETHERNET_ADDR0 register is at address
0xc8834108. However, the reference driver uses 0xc8834540 instead.
According to my tests, the value from the reference driver is correct.

No changes are required to the board dts files because the only
required configuration option is the phy-mode, which had to be
configured correctly before as well.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jérôme Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilm

ARM64: dts: meson-gxbb: Add Meson GXBB PWM Controller nodes

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Jérôme Brunet <jbrunet@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxbb: Add Meson MHU Node

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic 64-bit DT changes for v4.9" from Kevin Hilman:

- add watchdog, reset, IR

Merge tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into next/late

Pull "Amlogic 64-bit DT changes for v4.9" from Kevin Hilman:

- add watchdog, reset, IR remote, PWM
- add secure monitor and eFuse
- add always-on (AO) domain clock and reset

* tag 'amlogic-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
ARM64: dts: amlogic: gxbb: Enable NVMEM
documentation: Add nvmem bindings documentation
ARM64: dts: amlogic: gxbb: Enable secure monitor
documentation: Add secure monitor bindings documentation
ARM64: dts: meson-gxbb: Add PWM pinctrl nodes
ARM64: dts: meson-gxbb: Enable the the IR decoder on supported boards
ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder
dt-bindings: media: meson-ir: Add Meson8b and GXBB compatible strings
ARM64: dts: amlogic: add the input pin for the IR remote
ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node
clk: meson: Fix invalid use of sizeof in gxbb_aoclkc_probe()
clk: meson: Add GXBB AO Clock and Reset controller driver
dt-bindings: clock: reset: Add GXBB AO Clock and Reset Bindings
ARM64: DTS: meson-gxbb: switch ethernet to real clock
ARM64: dts: amlogic: meson-gxbb: Add watchdog node

show more ...

ARM64: dts: amlogic: gxbb: Enable NVMEM

Add the NVMEM device node in the DTSI.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
[khilman: dropped driver cleanup hunk]
Signed-off-by: Kevin Hilman <k

ARM64: dts: amlogic: gxbb: Enable NVMEM

Add the NVMEM device node in the DTSI.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
[khilman: dropped driver cleanup hunk]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: amlogic: gxbb: Enable secure monitor

Add the secure monitor node in the Amlogic Meson GXBB DTSI file to
enable it.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin

ARM64: dts: amlogic: gxbb: Enable secure monitor

Add the secure monitor node in the Amlogic Meson GXBB DTSI file to
enable it.

Signed-off-by: Carlo Caione <carlo@endlessm.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxbb: Add PWM pinctrl nodes

Add DT nodes for PWMs in EE and AO domains.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>

ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder

This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.

Signed-off-by: Neil Armstrong <narmstr

ARM64: dts: meson-gxbb: Add Infrared Remote Controller decoder

This adds the Infrared Remote Controller node so boards with an IR
remote can simply enable it.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: amlogic: add the input pin for the IR remote

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Ke

ARM64: dts: amlogic: add the input pin for the IR remote

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node

Add the AO clock controller node for the AmLogic GXBB SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Linus Walleij <

ARM64: dts: meson-gxbb: Add GXBB AO Clock and Reset node

Add the AO clock controller node for the AmLogic GXBB SoC.

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

Merge branch 'x86/urgent' into x86/asm, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

ARM64: DTS: meson-gxbb: switch ethernet to real clock

With the clock driver upstream, switch to the real clock.

Signed-off-by: Kevin Hilman <khilman@baylibre.com>

ARM64: dts: amlogic: meson-gxbb: Add watchdog node

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Hilman <khilman@baylib

ARM64: dts: amlogic: meson-gxbb: Add watchdog node

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>

show more ...

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by

Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued

Backmerge because too many conflicts, and also we need to get at the
latest struct fence patches from Gustavo. Requested by Chris Wilson.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

show more ...

Merge branch 'linus' into timers/urgent, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into locking/urgent, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v4.8-rc1' into patchwork

Linux 4.8-rc1

* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_at

Merge tag 'v4.8-rc1' into patchwork

Linux 4.8-rc1

* tag 'v4.8-rc1': (6093 commits)
Linux 4.8-rc1
block: rename bio bi_rw to bi_opf
target: iblock_execute_sync_cache() should use bio_set_op_attrs()
mm: make __swap_writepage() use bio_set_op_attrs()
block/mm: make bdev_ops->rw_page() take a bool for read/write
fs: return EPERM on immutable inode
ramoops: use persistent_ram_free() instead of kfree() for freeing prz
ramoops: use DT reserved-memory bindings
NTB: ntb_hw_intel: use local variable pdev
NTB: ntb_hw_intel: show BAR size in debugfs info
ntb_test: Add a selftest script for the NTB subsystem
ntb_perf: clear link_is_up flag when the link goes down.
ntb_pingpong: Add a debugfs file to get the ping count
ntb_tool: Add link status and files to debugfs
ntb_tool: Postpone memory window initialization for the user
ntb_perf: Wait for link before running test
ntb_perf: Return results by reading the run file
ntb_perf: Improve thread handling to increase robustness
ntb_perf: Schedule based on time not on performance
ntb_transport: Check the number of spads the hardware supports
...

show more ...

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM DT updates from Olof Johansson:
"Just as the 32-bit contents, the 64-bit device tree branch also

Merge tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull 64-bit ARM DT updates from Olof Johansson:
"Just as the 32-bit contents, the 64-bit device tree branch also
contains a number of additions this release cycle.

New platforms:
- LG LG1313
- Mediatek MT6755
- Renesas r8a7796
- Broadcom 2837

Other platforms with larger updates are:
- Nvidia X1 platforms (USB 3.0, regulators, display subsystem)
- Mediatek MT8173 (display subsystem added)
- Rockchip RK3399 (a lot of new peripherals)
- ARM Juno reference implementation (SCPI power domains, coresight,
thermal)"

* tag 'armsoc-dt64' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (118 commits)
arm64: tegra: Enable HDMI on Jetson TX1
arm64: tegra: Add sor1_src clock
arm64: tegra: Add XUSB powergates on Tegra210
arm64: tegra: Add DPAUX pinctrl bindings
arm64: tegra: Add ACONNECT bus node for Tegra210
arm64: tegra: Add audio powergate node for Tegra210
arm64: tegra: Add regulators for Tegra210 Smaug
arm64: tegra: Correct Tegra210 XUSB mailbox interrupt
arm64: tegra: Enable XUSB controller on Jetson TX1
arm64: tegra: Enable debug serial on Jetson TX1
arm64: tegra: Add Tegra210 XUSB controller
arm64: tegra: Add Tegra210 XUSB pad controller
arm64: tegra: Add DSI panel on Jetson TX1
arm64: tegra: p2597: Add SDMMC power supplies
arm64: tegra: Add PMIC support on Jetson TX1
Revert "ARM64: DTS: meson-gxbb: switch ethernet to real clock"
arm64: dts: hi6220: Add pl031 RTC support
arm64: dts: r8a7796/salvator-x: Enable watchdog timer
arm64: dts: r8a7796: Add RWDT node
arm64: dts: r8a7796: Use SYSC "always-on" PM Domain
...

show more ...

Merge branches 'for-4.8/alps', 'for-4.8/apple', 'for-4.8/i2c-hid', 'for-4.8/uhid-offload-hid-device-add' and 'for-4.8/upstream' into for-linus

Merge branch 'for-linus' into next

Sync up to bring in wacom_w8001 changes to avoid merge conflicts later.