Merge tag 'v3.14-rc4' into next

Merge with Linux 3.14-rc4 to bring devm_request_any_context_irq().

ARM: shmobile: r8a7790 SYSC setup code

Add r8a7790 SYSC power management support.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesa

ARM: shmobile: r8a7790 SYSC setup code

Add r8a7790 SYSC power management support.

Signed-off-by: Hisashi Nakamura <hisashi.nakamura.ak@renesas.com>
Signed-off-by: Ryo Kataoka <ryo.kataoka.wt@renesas.com>
[damm@opensource.se: Converted to use broken out SYSC code]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: Break out R-Car SYSC PM code

Break out the R-Car SYSC power management code from
the r8a7779 SoC code. With this new shared R-Car SYSC
code base it is possible to hook in Generation 2

ARM: shmobile: Break out R-Car SYSC PM code

Break out the R-Car SYSC power management code from
the r8a7779 SoC code. With this new shared R-Car SYSC
code base it is possible to hook in Generation 2 SoCs
as well.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge branch 'master' into for-next

ARM: shmobile: Remove KZM9D board code

Get rid of KZM9D board code written in C. This version of the
C board code was used in the case of multiplatform, but these
days DT can be used instead, so bec

ARM: shmobile: Remove KZM9D board code

Get rid of KZM9D board code written in C. This version of the
C board code was used in the case of multiplatform, but these
days DT can be used instead, so because of that simply get rid
of the C code to simplify and save space.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge branch 'linus' into perf/core

Refresh the branch to a v3.14-rc base before queueing up new devel patches.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into sched/core, to resolve conflicts

Conflicts:
kernel/sysctl.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into core/locking

Refresh the topic.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'v3.13' into next

Linux 3.13

Minor fixup needed in selinux_inet_conn_request()

Conflicts:
security/selinux/hooks.c

Merge tag 'xtensa-for-next-20140221-1' into for_next

Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;

Merge tag 'xtensa-for-next-20140221-1' into for_next

Xtensa fixes for 3.14:
- allow booting xtfpga on boards with new uBoot and >128MBytes memory;
- drop nonexistent GPIO32 support from fsf variant;
- don't select USE_GENERIC_SMP_HELPERS;
- enable common clock framework support, set up ethoc clock on xtfpga;
- wire up sched_setattr and sched_getattr syscalls.

Signed-off-by: Chris Zankel <chris@zankel.net>

show more ...

Merge tag 'efi-urgent' into x86/urgent

* Avoid WARN_ON() when mapping BGRT on Baytrail (EFI 32-bit).

Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>

Merge tag 'v3.13' into stable-3.14

Linux 3.13

Conflicts:
security/selinux/hooks.c

Trivial merge issue in selinux_inet_conn_request() likely due to me
including patches that I sent to the stable f

Merge tag 'v3.13' into stable-3.14

Linux 3.13

Conflicts:
security/selinux/hooks.c

Trivial merge issue in selinux_inet_conn_request() likely due to me
including patches that I sent to the stable folks in my next tree
resulting in the patch hitting twice (I think). Thankfully it was an
easy fix this time, but regardless, lesson learned, I will not do that
again.

show more ...

Merge remote-tracking branch 'wireless-next/master' into ath-next

Merge tag 'v3.14-rc1' into patchwork

Linus 3.14-rc1

* tag 'v3.14-rc1': (11781 commits)
Linus 3.14-rc1
hpfs: optimize quad buffer loading
hpfs: remember free space
parisc: add flexible mmap

Merge tag 'v3.14-rc1' into patchwork

Linus 3.14-rc1

* tag 'v3.14-rc1': (11781 commits)
Linus 3.14-rc1
hpfs: optimize quad buffer loading
hpfs: remember free space
parisc: add flexible mmap memory layout support
parisc: Make EWOULDBLOCK be equal to EAGAIN on parisc
parisc: convert uapi/asm/stat.h to use native types only
parisc: wire up sched_setattr and sched_getattr
parisc: fix cache-flushing
parisc/sti_console: prefer Linux fonts over built-in ROM fonts
hwmon: Fix SENSORS_TMP102 dependencies to eliminate build errors
hwmon: Fix SENSORS_LM75 dependencies to eliminate build errors
tools/power turbostat: introduce -s to dump counters
tools/power turbostat: remove unused command line option
afs: proc cells and rootcell are writeable
tile: remove compat_sys_lookup_dcookie declaration to fix compile error
Revert "PCI: Remove from bus_list and release resources in pci_release_dev()"
ARM: multi_v7_defconfig: remove redundant entries and re-enable TI_EDMA
ARM: multi_v7_defconfig: add mvebu drivers
clocksource: kona: Add basic use of external clock
drivers: bus: fix CCI driver kcalloc call parameters swap
...

show more ...

Merge branch 'master' into staging-next

We need the network changes in staging-next in order to be able to fix
up the rtl8821ae driver to build properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@l

Merge branch 'master' into staging-next

We need the network changes in staging-next in order to be able to fix
up the rtl8821ae driver to build properly.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
"This branch is reducing in size for every release since mo

Merge tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC board updates from Olof Johansson:
"This branch is reducing in size for every release since most
board-related changes have started happening in devicetrees now.
Still, we have some things going on here.

* Renesas platforms are still adding a bit more legacy device
support, something that should trail off shortly as they move to
full DT
* We group most defconfig updates into this branch out of old habits
* Removal of legacy OMAP2 platforms over to DT continues, and a
handful of old code is being removed here"

* tag 'boards-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: dts: OMAP2: fix interrupt number for rng
ARM: dts: Split omap3 pinmux core device
ARM: dts: Add omap specific pinctrl defines to use padconf addresses
ARM: bcm2835: bcm2835_defconfig updates
ARM: msm_defconfig: Enable restart driver
defconfig: msm_defconfig: Enable CONFIG_ARCH_MSM8974
ARM: msm: Add support for APQ8074 Dragonboard
ARM: exynos_defconfig: Enable S2MPS11 voltage regulator
ARM: tegra: Enable DRM panel support
ARM: shmobile: mackerel: Fix USBHS pinconf entry
ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB
ARM: shmobile: Let Lager multiplatform boot with Lager DTB
ARM: shmobile: Remove non-multiplatform Koelsch reference support
ARM: shmobile: Remove non-multiplatform Lager reference support
ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization
ARM: shmobile: lager-reference: Enable multiplaform kernel support
ARM: shmobile: armadillo: Set backlight enable GPIO
ARM: shmobile: Koelsch: add Ether support
...

Conflicts:
arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c

show more ...

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
"New core SoC-specific changes.

New platforms:
* Intr

Merge tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform changes from Olof Johansson:
"New core SoC-specific changes.

New platforms:
* Introduction of a vendor, Hisilicon, and one of their SoCs with
some random numerical product name.
* Introduction of EFM32, embedded platform from Silicon Labs (ARMv7m,
i.e. !MMU).
* Marvell Berlin series of SoCs, which include the one in Chromecast.
* MOXA platform support, ARM9-based platform used mostly in
industrial products
* Support for Freescale's i.MX50 SoC.

Other work:
* Renesas work for new platforms and drivers, and conversion over to
more multiplatform-friendly device registration schemes.
* SMP support for Allwinner sunxi platforms.
* ... plus a bunch of other stuff across various platforms"

* tag 'soc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (201 commits)
ARM: tegra: fix tegra_powergate_sequence_power_up() inline
ARM: msm_defconfig: Update for multi-platform
ARM: msm: Move MSM's DT based hardware to multi-platform support
ARM: msm: Only build timer.c if required
ARM: msm: Only build clock.c on proc_comm based platforms
ARM: ux500: Enable system suspend with WFI support
ARM: ux500: turn on PRINTK_TIME in u8500_defconfig
ARM: shmobile: r8a7790: Fix I2C controller names
ARM: msm: Simplify ARCH_MSM_DT config
ARM: msm: Add support for MSM8974 SoC
ARM: sunxi: select ARM_PSCI
MAINTAINERS: Update Allwinner sunXi maintainer files
ARM: sunxi: Select RESET_CONTROLLER
ARM: imx: improve the comment of CCM lpm SW workaround
ARM: imx: improve status check of clock gate
ARM: imx: add necessary interface for pfd
ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
ARM: imx: Add cpu frequency scaling support
ARM i.MX35: Add devicetree support.
...

show more ...

Merge to v3.13-rc7 for prerequisite changes in the Xen code for TPM

Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Second Round of Renesas ARM based SoC Board updates for v3.14

Merge tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Second Round of Renesas ARM based SoC Board updates for v3.14

* r8a7791 (R-Car M2) based Koelsch board
- Let Koelsch multiplatform boot with Koelsch DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Remove duplicate CCF initialization
- Add Ether and DU support

* r8a7790 (R-Car H2) based Lager board
- Let Lager multiplatform boot with Lager DTB
- Remove non-multiplatform DT reference support
- Instantiate clkdevs for SCIF and CMT
- Enable multiplaform kernel support

* r8a7740 (R-Mobile A1) based Armadillo board
- Set backlight enable GPIO

* sh7374 (SH-Mobile AP4) based Mackerel board
- Correct USBHS pinconf entry

* tag 'renesas-boards2-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (25 commits)
ARM: shmobile: mackerel: Fix USBHS pinconf entry
ARM: shmobile: Let Koelsch multiplatform boot with Koelsch DTB
ARM: shmobile: Let Lager multiplatform boot with Lager DTB
ARM: shmobile: Remove non-multiplatform Koelsch reference support
ARM: shmobile: Remove non-multiplatform Lager reference support
ARM: shmobile: koelsch-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: lager-reference: Instantiate clkdevs for SCIF and CMT
ARM: shmobile: koelsch-reference: Remove duplicate CCF initialization
ARM: shmobile: lager-reference: Enable multiplaform kernel support
ARM: shmobile: armadillo: Set backlight enable GPIO
ARM: shmobile: Koelsch: add Ether support
ARM: shmobile: koelsch: Add DU device
arm: shmobile: clks: remove duplicated clock from r7s72100
ARM: shmobile: koelsch: Conditionally select MICREL_PHY
ARM: shmobile: rcar-gen2: Initialize CCF before clock sources
ARM: shmobile: r8a7791: Add clock index macros for DT sources
ARM: shmobile: r8a7790: Add clock index macros for DT sources
ARM: shmobile: Add select MIGHT_HAVE_PCI for PCI-AHB bridge code
ARM: shmobile: r8a7778: add USB Func DMAEngine support
ARM: rcar-gen2: Do not setup timer in non-secure mode
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

From Simon Horman:
Third Round of Renesas SH SCI Updates for v3.14

* Add Devic

Merge tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

From Simon Horman:
Third Round of Renesas SH SCI Updates for v3.14

* Add Device Tree Support
* Remove platform data mapbase and irqs fields
* Remove platform data scbrr_algo_id field

* tag 'renesas-sh-sci3-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
serial: sh-sci: Add OF support
serial: sh-sci: Add device tree bindings documentation
serial: sh-sci: Remove platform data mapbase and irqs fields
serial: sh-sci: Remove platform data scbrr_algo_id field

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge commit v3.13-rc1 into kbuild/misc

Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC board updates for v3.14

* Global
- Kc

Merge tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM based SoC board updates for v3.14

* Global
- Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile

* r7s72100 SoC (RZ/A1H) based Genmai Board
- Add Multiplatform support
- Add Reference DT

* r8a7791 (R-Car M2) based Koelsch board
- Add pinctrl_register_mappings() for Koelsch
- Hook up SW30-SW36 on Koelsch
- Mark GPIO keys as wake-up sources
- Use ->init_late()
- Add Multiplatform support
- Set .debounce_interval for GPIO keys
- Add SW2 to GPIO keys
- Add Led 6, 7 and 8 support
- Add reference DT
- Enable PFC/GPIO

* r8a7790 (R-Car H2) based Lager board
- Add gpio/fixed regulator for SDHI
- Add SPI FLASH support on QSPI
- Mark GPIO keys as wake-up sources
- Use ->init_late()
- Set .debounce_interval for GPIO keys

* r8a7778 (R-Car M1) based Bock-W board
- bockw: remove unused RSND_SSI_CLK_FROM_ADG
- Set .debounce_interval for GPIO keys
- Correct FPGA ioremap area
- Use regulator for MMCIF

* r8a7740 (R-Mobile A1) based Armadillo board
- Correct FSI address size

* sh7374 (SH-Mobile AP4) based Mackerel board
- Use pinconf API to configure pin pull-down
- clk_round_rate() can return a zero to indicate an error

* tag 'renesas-boards-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (75 commits)
ARM: shmobile: lager: add gpio/fixed regulator for SDHI
ARM: shmobile: bockw: remove unused RSND_SSI_CLK_FROM_ADG
ARM: shmobile: armadillo: fixup FSI address size
ARM: Kconfig: Mention Renesas ARM SoCs instead of SH-Mobile
ARM: shmobile: mackerel: Use pinconf API to configure pin pull-down
ARM: shmobile: Lager:add SPI FLASH support on QSPI
ARM: shmobile: mackerel: clk_round_rate() can return a zero to indicate an error
ARM: shmobile: Add pinctrl_register_mappings() for Koelsch
ARM: shmobile: Use ->init_late() on Lager
ARM: shmobile: Hook up SW30-SW36 on Koelsch
ARM: shmobile: koelsch: mark GPIO keys as wake-up sources
ARM: shmobile: Use ->init_late() on Koelsch
ARM: shmobile: lager: mark GPIO keys as wake-up sources
ARM: shmobile: r7s72100 Genmai Multiplatform
ARM: shmobile: r7s72100 Genmai DT reference C bits
ARM: shmobile: r7s72100 Genmai DT reference DTS bits
ARM: shmobile: Initial r8a7791 and Koelsch multiplatform support
ARM: shmobile: koelsch: set .debounce_interval
ARM: shmobile: lager: set .debounce_interval
ARM: shmobile: bockw: add pin pull-up setting for SDHI
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM based SoC DT updates for v3.14

* Global
- Use interrupt

Merge tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM based SoC DT updates for v3.14

* Global
- Use interrupt macros
- Use #include in device tree sources
- Tidyup DT node naming

* emev2 (Emma Mobile EV2) SoC
- Setup internal peripheral interrupts as level high
- Use interrupt macros in DT files
- Add clock tree description in DT

* r8a7791 (R-Car M2) SoC
- Correct GPIO resources

* r8a7791 (R-Car M2) based Koelsch board
- Configure PFC and GPO
- Use r8a7791 suffix for IRQC compat string
- Add DT reference

* r8a7790 (R-Car H2) based Lager board
- Include all 4 GiB of memory
- Use r8a7790 suffix for IRQC and MMCIF compat strings
- Enable MMCIF
- Add default PFC settings

* r8a7778 (R-Car M1) SoC
- Suffix for INTC compat string
- Add HSPI, MMCIF, SDHI and I2C suppport on DTSI
- Correct pin control device addresses

* r8a7778 (R-Car M1) based Bock-W board
- Use falling edge IRQ for LAN9221 in DT reference
- Enable I2C, HSPI0, MMCIF and SDHI
- Correct MMC pin conflict
- Remove manual PFC settings from DT reference
- Add default PFC settings

* r8a7779 (R-Car H1) SoC
- Add HSPI and SDHI support
- Suffix for INTC compat string

* r8a7779 (R-Car H1) based Marzen board
- Enable HSPI0 and SDHI in DTS
- Remove SDHI0 WP pin setting
- Use falling edge IRQ for LAN9221 in DT reference
- Add SDHI support

* r8a7740 (R-Mobile A1) SoC
- Suffix for INTC compat string
- Add FSI support via DTSI
- Use interrupt macros

* r8a7740 based Armadillo board
- Add FSI support for DTS
- Use low level IRQ for ST1231 in DT reference

* r8a73a4 (SH-Mobile APE6) SoC
- Use interrupt macros in DT files

* r8a73a4 (R-Mobile APE6) based ape6evm board
- Include all 2 GiB of memory

* r8a73a0 (SH-Mobile AG5) SoC
- Correct SDHI compat string

* r8a73a0 (SH-Mobile AG5) based kzm9d board
- Add GPIO keys and Add PCF8575 GPIO extender to DT
- Enable DSW2 with gpio-keys
- Use falling edge IRQ for LAN9221 in DT reference

* tag 'renesas-dt-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (102 commits)
ARM: shmobile: marzen: enable HSPI0 in DTS
ARM: shmobile: r8a7779: add HSPI support to DTSI
ARM: shmobile: Use r8a7779 suffix for INTC compat string
ARM: shmobile: Use r8a7778 suffix for INTC compat string
ARM: shmobile: Use r8a7740 suffix for INTC compat string
ARM: shmobile: Use sh73a0 suffix for INTC compat string
ARM: shmobile: armadillo: add FSI support for DTS
ARM: shmobile: r8a7740: add FSI support via DTSI
ARM: shmobile: emev2: Setup internal peripheral interrupts as level high
ARM: shmobile: emev2: Use interrupt macros in DT files
ARM: shmobile: Use interrupt macros in r8a73a4 and r8a7778 DT files
ARM: shmobile: Fix r8a7791 GPIO resources in DTS
ARM: shmobile: Include all 4 GiB of memory on Lager DT Ref
ARM: shmobile: Include all 4 GiB of memory on Lager
ARM: shmobile: Include all 2 GiB of memory on APE6EVM
ARM: shmobile: Include all 2 GiB of memory on APE6EVM DT Ref
ARM: shmobile: kzm9g-reference: Add GPIO keys to DT
ARM: shmobile: kzm9g-reference: Add PCF8575 GPIO extender to DT
ARM: shmobile: Koelsch DT reference GPIO LED support
ARM: shmobile: Enable DSW2 with gpio-keys on KZM9D
...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

show more ...

Merge tag 'renesas-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM based SoC updates for v3.14

* Rename ARCH_SHMOBILE to A

Merge tag 'renesas-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc

From Simon Horman:
Renesas ARM based SoC updates for v3.14

* Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY

* r8a7791 SoC (R-Car M2)
- Add thermal platform device
- Add DU and LVDS clocks
- GPIO platform device support
- PFC platform device support
- Select IRQC

* r8a7790 SoC (R-Car H2)
- Tidyup clock table order
- Fixup I2C clock source
- Correct EXTAL divider settings
- Add clocks for thermal devices and SSI

* r8a7779 SoC (R-Car H1)
- Add I2C clock for DT

* r8a7778 SoC (R-Car M1)
- Add HSPI clocks for DT
- Add I2C clock for DT
- Add HPBIFx DMAEngine support

* r8a7740 SoC (R-Mobile A1)
- Add FSI clocks for DT

* emev2 SoC (Emma Mobile)
- Move to Multi-platform
- Remove legacy board code

* r7s72100 SoC (RZ/A1H)
- Select GPIO

* r8a73a4 SoC (R-Mobile APE6)
- Don't used named IRC for DMAEngine

* tag 'renesas-soc-for-v3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
ARM: shmobile: r8a7779: add HSPI clock support for DT
ARM: shmobile: r8a7740: add FSI clock support for DT
ARM: shmobile: r8a7790: add SSI MSTP clocks
ARM: shmobile: r8a7778: add HPBIFx DMAEngine support
ARM: shmobile: Select AUTO_ZRELADDR for EMEV2
ARM: shmobile: r8a7790: tidyup clock table order
ARM: shmobile: r8a7790: fixup I2C clock source
ARM: shmobile: r8a7790: care EXTAL divider settings
ARM: shmobile: Add r8a7791 clocks for thermal devices
ARM: shmobile: Add r8a7791 thermal platform device
ARM: shmobile: Add r8a7790 clocks for thermal devices
ARM: Rename ARCH_SHMOBILE to ARCH_SHMOBILE_LEGACY
ARM: shmobile: r8a7791: Add DU and LVDS clocks
ARM: shmobile: Select USE_OF on EMEV2
ARM: shmobile: r8a7778: add HSPI clock support for DT
ARM: shmobile: Remove legacy platform devices from EMEV2 SoC code
ARM: shmobile: Remove legacy KZM9D board code
ARM: shmobile: Use ->init_late() in shared EMEV2 case
ARM: shmobile: Add shared EMEV2 code for ->init_machine()
ARM: shmobile: Enable MTU2 on r7s72100
...

Signed-off-by: Kevin Hilman <khilman@linaro.org>

show more ...

Merge branch 'master' into for-next

Sync with Linus' tree to be able to apply fixes on top of newer things
in tree (efi-stub).

Signed-off-by: Jiri Kosina <jkosina@suse.cz>