Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"This is the first big chunk for 3.5 merges of sound stuff.

There are a f

Merge tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
"This is the first big chunk for 3.5 merges of sound stuff.

There are a few big changes in different areas. First off, the
streaming logic of USB-audio endpoints has been largely rewritten for
the better support of "implicit feedback". If anything about USB got
broken, this change has to be checked.

For HD-audio, the resume procedure was changed; instead of delaying
the resume of the hardware until the first use, now waking up
immediately at resume. This is for buggy BIOS.

For ASoC, dynamic PCM support and the improved support for digital
links between off-SoC devices are major framework changes.

Some highlights are below:

* HD-audio
- Avoid accesses of invalid pin-control bits that may stall the codec
- V-ref setup cleanups
- Fix the races in power-saving code
- Fix the races in codec cache hashes and connection lists
- Split some common codes for BIOS auto-parser to hda_auto_parser.c
- Changed the PM resume code to wake up immediately for buggy BIOS
- Creative SoundCore3D support
- Add Conexant CX20751/2/3/4 codec support

* ASoC
- Dynamic PCM support, allowing support for SoCs with internal
routing through components with tight sequencing and formatting
constraints within their internal paths or where there are multiple
components connected with CPU managed DMA controllers inside the
SoC.
- Greatly improved support for direct digital links between off-SoC
devices, providing a much simpler way of connecting things like
digital basebands to CODECs.
- Much more fine grained and robust locking, cleaning up some of the
confusion that crept in with multi-component.
- CPU support for nVidia Tegra 30 I2S and audio hub controllers and
ST-Ericsson MSP I2S controolers
- New CODEC drivers for Cirrus CS42L52, LAPIS Semiconductor ML26124,
Texas Instruments LM49453.
- Some regmap changes needed by the Tegra I2S driver.
- mc13783 audio support.

* Misc
- Rewrite with module_pci_driver()
- Xonar DGX support for snd-oxygen
- Improvement of packet handling in snd-firewire driver
- New USB-endpoint streaming logic
- Enhanced M-audio FTU quirks and relevant cleanups
- Increment the support of OSS devices to 256
- snd-aloop accuracy improvement

There are a few more pending changes for 3.5, but they will be sent
slightly later as partly depending on the changes of DRM."

Fix up conflicts in regmap (due to duplicate patches, with some further
updates then having already come in from the regmap tree). Also some
fairly trivial context conflicts in the imx and mcx soc drivers.

* tag 'sound-3.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (280 commits)
ALSA: snd-usb: fix stream info output in /proc
ALSA: pcm - Add proper state checks to snd_pcm_drain()
ALSA: sh: Fix up namespace collision in sh_dac_audio.
ALSA: hda/realtek - Fix unused variable compile warning
ASoC: sh: fsi: enable chip specific data transfer mode
ASoC: sh: fsi: call fsi_hw_startup/shutdown from fsi_dai_trigger()
ASoC: sh: fsi: use same format for IN/OUT
ASoC: sh: fsi: add fsi_version() and removed meaningless version check
ASoC: sh: fsi: use register field macro name on IN/OUT_DMAC
ASoC: tegra: Add machine driver for WM8753 codec
ALSA: hda - Fix possible races of accesses to connection list array
ASoC: OMAP: HDMI: Introduce codec
ARM: mx31_3ds: Add sound support
ASoC: imx-mc13783 cleanup
mx31moboard: Add sound support
ASoC: mc13783 codec cleanups
ASoC: add imx-mc13783 sound support
ASoC: Add mc13783 codec
mfd: mc13xxx: add codec platform data
ASoC: don't flip master of DT-instantiated DAI links
...

show more ...

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
"While we generally attempt to get rid of board specific fil

Merge tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull arm-soc board specific changes from Olof Johansson:
"While we generally attempt to get rid of board specific files and
replace them with device tree based descriptions, a lot of platforms
have not come that far:

In shmobile, we add two new board files because their recently started
effort to add DT support has not proceeded enough to use it for all of
the important hardware.

In Kirkwood, we are adding support for new boards with a combination
of DT and board file contents in multiple cases.

pxa/mmp and imx are extending support for existing board files but not
adding new ones."

Fix up trivial conflicts in arch/arm/mach-{mmp/ttc_dkb.c,shmobile/{Kconfig,Makefile}}

* tag 'boards' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (94 commits)
ARM: shmobile: fix smp build
ARM: kirkwood: Add support for RaidSonic IB-NAS6210/6220 using devicetree
kirkwood: Add iconnect support
orion/kirkwood: create a generic function for gpio led blinking
kirkwood/orion: fix orion_gpio_set_blink
ARM: kirkwood: Define DNS-320/DNS-325 NAND in fdt
kirkwood: Allow nand to be configured via. devicetree
mtd: Add orion_nand devicetree bindings
ARM: kirkwood: Basic support for DNS-320 and DNS-325
ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
ARM: mach-shmobile: Use DT_MACHINE for KZM9G
ARM: pxa: hx4700: Add Synaptics NavPoint touchpad
ARM: pxa: Use REGULATOR_SUPPLY macro
ARM: mach-shmobile: kzm9g: enable SMP boot
ARM: mach-shmobile: kzm9g: defconfig update
ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
ARM: mach-shmobile: kzm9g: add SDHI support
ARM: mach-shmobile: kzm9g: add MMCIF support
ARM: mach-shmobile: kzm9g: correct screen direction
ARM: mach-shmobile: sh73a0.h: add GPIO_NR
...

show more ...

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull support for new arm SoCs from Olof Johansson:
"Three new system-on-chip models are supported: the st-ericsson u9540

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull support for new arm SoCs from Olof Johansson:
"Three new system-on-chip models are supported: the st-ericsson u9540
in ux500, the sam9n12 in at91 and the emma ev2 in shmobile.

Emma is a little bit special because it is completely unrelated to the
classic shmobile models, but the new Renesas rmobile SoCs are a
combination of things from both Emma and shmobile, so it was decided
to have them all live in one directory.

This also contains updates to existing shmobile soc code as well as
some related board changes due to dependencies."

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (23 commits)
mach-shmobile: Use DT_MACHINE for KZM9D V3
mach-shmobile: Emma Mobile EV2 DT support V3
mach-shmobile: KZM9D board Ethernet support V3
mach-shmobile: Emma Mobile EV2 GPIO support V3
mach-shmobile: Emma Mobile EV2 SMP support V3
mach-shmobile: KZM9D board support V3
mach-shmobile: Emma Mobile EV2 SoC base support V3
gpio: Emma Mobile GPIO driver V2
ARM: mach-shmobile: sh73a0: fixup PINT/IRQ16-IRQ31 irq number conflict
ARM: mach-shmobile: clock-r8a7740: use followparent_recalc on usb24s
ARM: mach-shmobile: clock-r8a7740: add MMCIF clock
ARM: mach-shmobile: clock-r8a7740: add SDHI clock
ARM: mach-shmobile: clock-r8a7740: add USB clock
ARM: mach-shmobile: clock-r8a7740: add FSI clock
ARM: mach-shmobile: r8a7740: cleanup I2C workaround method
ARM: mach-shmobile: r8a7740: add gpio_irq support
ARM: mach-shmobile: sh7372: Add FSI DMAEngine support
ARM / mach-shmobile: Use preset_lpj with calibrate_delay()
ARM: ux500: ioremap differences for DB9540
ARM: ux500: core U9540 support
...

show more ...

Merge branch 'topic/asoc' into for-linus

Merge branch 'emev2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/soc

* 'emev2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
mach-shmobile: Use DT_

Merge branch 'emev2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/soc

* 'emev2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas:
mach-shmobile: Use DT_MACHINE for KZM9D V3
mach-shmobile: Emma Mobile EV2 DT support V3
mach-shmobile: KZM9D board Ethernet support V3
mach-shmobile: Emma Mobile EV2 GPIO support V3
mach-shmobile: Emma Mobile EV2 SMP support V3
mach-shmobile: KZM9D board support V3
mach-shmobile: Emma Mobile EV2 SoC base support V3
gpio: Emma Mobile GPIO driver V2

show more ...

mach-shmobile: Use DT_MACHINE for KZM9D V3

Use DT_MACHINE_START() on the emev2 based KZM9D board.

Also include a tiny DTS file to describe the board and
update the Kconfig dependencies to select CO

mach-shmobile: Use DT_MACHINE for KZM9D V3

Use DT_MACHINE_START() on the emev2 based KZM9D board.

Also include a tiny DTS file to describe the board and
update the Kconfig dependencies to select CONFIG_USE_OF.

Update the SMP glue code to use OF for matching.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

mach-shmobile: Emma Mobile EV2 GPIO support V3

Tie in the Emma Mobile GPIO driver "em-gio" to
support the GPIOs on Emma Mobile EV2.

A static IRQ range is used to allow boards to
hook up their platf

mach-shmobile: Emma Mobile EV2 GPIO support V3

Tie in the Emma Mobile GPIO driver "em-gio" to
support the GPIOs on Emma Mobile EV2.

A static IRQ range is used to allow boards to
hook up their platform devices to the GPIOs.

DT support is still on the TODO for the GPIO driver,
so only platform device support is included here.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

mach-shmobile: KZM9D board support V3

V3 of basic KZM9D board support. At this point a quite
thin layer that makes use of the Emma Mobile EV2 SoC code.

Signed-off-by: Magnus Damm <damm@opensource.s

mach-shmobile: KZM9D board support V3

V3 of basic KZM9D board support. At this point a quite
thin layer that makes use of the Emma Mobile EV2 SoC code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

mach-shmobile: Emma Mobile EV2 SoC base support V3

This is V3 of the Emma Mobile EV2 SoC support.
Included here is support for serial and timer
devices which is just about enough to boot a kernel.

mach-shmobile: Emma Mobile EV2 SoC base support V3

This is V3 of the Emma Mobile EV2 SoC support.
Included here is support for serial and timer
devices which is just about enough to boot a kernel.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

Merge branch 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards

"Rafael J. Wysocki" <rjw@sisk.pl> writes:

Renesas ARM-based platforms: new boards suppor

Merge branch 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas into next/boards

"Rafael J. Wysocki" <rjw@sisk.pl> writes:

Renesas ARM-based platforms: new boards support for v3.5

* Support for the KZM-A9-GT board from Kuninori Morimoto and Magnus Damm.
* Support for the armadillo800eva board from Kuninori Morimoto and Magnus Damm.

This is based on the Renesas core SoC code updates I've sent a separate pull
request for.

* 'board-new' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/renesas: (29 commits)
ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva
ARM: mach-shmobile: Use DT_MACHINE for KZM9G
ARM: mach-shmobile: kzm9g: enable SMP boot
ARM: mach-shmobile: kzm9g: defconfig update
ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
ARM: mach-shmobile: kzm9g: add SDHI support
ARM: mach-shmobile: kzm9g: add MMCIF support
ARM: mach-shmobile: kzm9g: correct screen direction
ARM: mach-shmobile: sh73a0.h: add GPIO_NR
ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
ARM: mach-shmobile: kzm9g: add LCDC support
ARM: mach-shmobile: kzm9g: add external USB Host support
ARM: mach-shmobile: kzm9g: add SMSC 9221 support
ARM: mach-shmobile: kzm9g: add defconfig
ARM: mach-shmobile: add KZM-A9-GT board support
ARM: mach-shmobile: armadillo800eva: defconfig update
ARM: mach-shmobile: clock-r8a7740: add sh-eth clock
ARM: mach-shmobile: r8a7740: reserve DMA memory for the frame buffer
ARM: mach-shmobile: armadillo800eva: add MMCIF support
...

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

show more ...

Merge branch 'renesas-kzm9g' into renesas-board-new

* renesas-kzm9g:
ARM: mach-shmobile: Use DT_MACHINE for KZM9G

Merge branch 'renesas-armadillo800eva' into renesas-board-new

* renesas-armadillo800eva:
ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva

ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva

Use DT_MACHINE_START() on the r8a7740 based armadillo 800 eva board.

Also include a tiny DTS file to describe the board and update the
Kconf

ARM: mach-shmobile: Use DT_MACHINE for armadillo 800 eva

Use DT_MACHINE_START() on the r8a7740 based armadillo 800 eva board.

Also include a tiny DTS file to describe the board and update the
Kconfig dependencies to select CONFIG_USE_OF.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

ARM: mach-shmobile: Use DT_MACHINE for KZM9G

Use DT_MACHINE_START() on the sh73a0 based KZM9G board.

Also include a tiny DTS file to describe the board and
update the Kconfig dependencies to select

ARM: mach-shmobile: Use DT_MACHINE for KZM9G

Use DT_MACHINE_START() on the sh73a0 based KZM9G board.

Also include a tiny DTS file to describe the board and
update the Kconfig dependencies to select CONFIG_USE_OF.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

Merge branch 'renesas-kzm9g' into renesas-board-new

* renesas-kzm9g:
ARM: mach-shmobile: kzm9g: enable SMP boot
ARM: mach-shmobile: kzm9g: defconfig update
ARM: mach-shmobile: kzm9g: add PCF87

Merge branch 'renesas-kzm9g' into renesas-board-new

* renesas-kzm9g:
ARM: mach-shmobile: kzm9g: enable SMP boot
ARM: mach-shmobile: kzm9g: defconfig update
ARM: mach-shmobile: kzm9g: add PCF8757 gpio-key
ARM: mach-shmobile: kzm9g: add SDHI support
ARM: mach-shmobile: kzm9g: add MMCIF support
ARM: mach-shmobile: kzm9g: correct screen direction
ARM: mach-shmobile: sh73a0.h: add GPIO_NR
ARM: mach-shmobile: pfc-sh73a0: fixup MSEL2CR MSEL18 for I2C-3
ARM: mach-shmobile: kzm9g: add ST1232 Touchscreen support
ARM: mach-shmobile: kzm9g: add LCDC support
ARM: mach-shmobile: kzm9g: add external USB Host support
ARM: mach-shmobile: kzm9g: add SMSC 9221 support
ARM: mach-shmobile: kzm9g: add defconfig
ARM: mach-shmobile: add KZM-A9-GT board support

Conflicts:
arch/arm/mach-shmobile/Makefile

show more ...

ARM: mach-shmobile: add KZM-A9-GT board support

This adds very basic KZM-A9-GT board (SH73a0) support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <ho

ARM: mach-shmobile: add KZM-A9-GT board support

This adds very basic KZM-A9-GT board (SH73a0) support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

ARM: mach-shmobile: add armadillo800eva board support.

This adds very basic armadillo800eva board (R-Mobile A1) support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by

ARM: mach-shmobile: add armadillo800eva board support.

This adds very basic armadillo800eva board (R-Mobile A1) support

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Simon Horman <horms@verge.net.au>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>

show more ...

Merge commit 'v3.4-rc4' into next

Merge tag 'v3.4-rc3' into staging/for_v3.5

* tag 'v3.4-rc3': (3755 commits)
Linux 3.4-rc3
x86-32: fix up strncpy_from_user() sign error
ARM: 7386/1: jump_label: fixup for rename to static_key

Merge tag 'v3.4-rc3' into staging/for_v3.5

* tag 'v3.4-rc3': (3755 commits)
Linux 3.4-rc3
x86-32: fix up strncpy_from_user() sign error
ARM: 7386/1: jump_label: fixup for rename to static_key
ARM: 7384/1: ThumbEE: Disable userspace TEEHBR access for !CONFIG_ARM_THUMBEE
ARM: 7382/1: mm: truncate memory banks to fit in 4GB space for classic MMU
ARM: 7359/2: smp_twd: Only wait for reprogramming on active cpus
PCI: Fix regression in pci_restore_state(), v3
SCSI: Fix error handling when no ULD is attached
ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors
ARM: dts: remove blank interrupt-parent properties
ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files
do not export kernel's NULL #define to userspace
ARM: EXYNOS: Remove broken config values for touchscren for NURI board
ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards
ARM: EXYNOS: fix regulator name for NURI board
ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL
cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS
sparc64: Eliminate obsolete __handle_softirq() function
sparc64: Fix bootup crash on sun4v.
ARM: msm: Fix section mismatches in proc_comm.c
...

show more ...

Merge commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81' into stable/for-linus-3.4

* commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81': (14566 commits)
cpufreq: OMAP: fix build errors: depends on A

Merge commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81' into stable/for-linus-3.4

* commit 'c104f1fa1ecf4ee0fc06e31b1f77630b2551be81': (14566 commits)
cpufreq: OMAP: fix build errors: depends on ARCH_OMAP2PLUS
sparc64: Eliminate obsolete __handle_softirq() function
sparc64: Fix bootup crash on sun4v.
kconfig: delete last traces of __enabled_ from autoconf.h
Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"
kconfig: fix IS_ENABLED to not require all options to be defined
irq_domain: fix type mismatch in debugfs output format
staging: android: fix mem leaks in __persistent_ram_init()
staging: vt6656: Don't leak memory in drivers/staging/vt6656/ioctl.c::private_ioctl()
staging: iio: hmc5843: Fix crash in probe function.
panic: fix stack dump print on direct call to panic()
drivers/rtc/rtc-pl031.c: enable clock on all ST variants
Revert "mm: vmscan: fix misused nr_reclaimed in shrink_mem_cgroup_zone()"
hugetlb: fix race condition in hugetlb_fault()
drivers/rtc/rtc-twl.c: use static register while reading time
drivers/rtc/rtc-s3c.c: add placeholder for driver private data
drivers/rtc/rtc-s3c.c: fix compilation error
MAINTAINERS: add PCDP console maintainer
memcg: do not open code accesses to res_counter members
drivers/rtc/rtc-efi.c: fix section mismatch warning
...

show more ...

Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code

Merge branch 'perf/core' into perf/uprobes

Merge in latest upstream (and the latest perf development tree),
to prepare for tooling changes, and also to pick up v3.4 MM
changes that the uprobes code needs to take care of.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

ASoC: sh: fsi: use simple-card instead of fsi-ak4642

This patch uses simple-card driver instead of fsi-ak4642 on each board.
To select AK4642 driver, each boards select it on Kconfig.

This patch re

ASoC: sh: fsi: use simple-card instead of fsi-ak4642

This patch uses simple-card driver instead of fsi-ak4642 on each board.
To select AK4642 driver, each boards select it on Kconfig.

This patch removes fsi-ak4642 driver which is no longer needed

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>

show more ...

Merge tag 'v3.4-rc2' into perf/core

Merge Linux 3.4-rc2: we were on v3.3, update the base.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into wireless-next