Merge tag 'renesas-boards-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM-based SoC board updates for v3.12

* ape6evm: Add

Merge tag 'renesas-boards-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

From Simon Horman:
Renesas ARM-based SoC board updates for v3.12

* ape6evm: Add SDHI and MMCIF support
* lager: Add MMCIF support
* armadillo800eva: Add DMA support for MMCIF

* tag 'renesas-boards-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (54 commits)
ARM: shmobile: ape6evm: add SDHI interfaces
ARM: shmobile: ape6evm: add MMCIF support
ARM: shmobile: select the fixed regulator driver on BockW
ARM: shmobile: lager: add MMCIF support
ARM: shmobile: armadillo800eva: add DMA support to MMCIF
ARM: shmobile: Setup r8a7790 arch timer based on MD pins
ARM: shmobile: Introduce r8a7790_read_mode_pins()
ARM: shmobile: r8a7740: add MMCIF DMA definitions
ARM: shmobile: Disconnect EMEV2 SMP code from clocks
ARM: shmobile: Make r8a73a4 Arch timer optional
ARM: shmobile: Add r8a73a4 CMT10 clock event
ARM: shmobile: Make r8a7790 Arch timer optional
ARM: shmobile: Add r8a7790 CMT00 clock event
ARM: shmobile: Sort r8a7790 MSTP entries
ARM: shmobile: r8a73a4: add clocks for I2C controllers
ARM: shmobile: r8a73a4: add Z2 clock support
ARM: shmobile: r8a73a4: safeguard against wrong clk_set_rate() uses
ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq
ARM: shmobile: r8a73a4: wait for completion when kicking the clock
ARM: shmobile: r8a7790: add thermal driver support
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge tag 'renesas-multiplatform-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM based SoC multiplatform updates for v3.12

Move

Merge tag 'renesas-multiplatform-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM based SoC multiplatform updates for v3.12

Move Renesas ARM based SoCs a little closer to using
multiplatform by adding ARCH_SHMOBILE_MULTI and only
building clocks when COMMON_CLK=n.

* tag 'renesas-multiplatform-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Allow ARCH_SHMOBILE_MULTI timer configuration
ARM: shmobile: Add EMEV2 and KZM9D to ARCH_SHMOBILE_MULTI
ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI
ARM: shmobile: Only build clocks when COMMON_CLK=n

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

Merge branch 'dt2' into cleanup3-base

Conflicts:
arch/arm/mach-shmobile/Makefile.boot

Merge tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM-based SoC DT updates for v3.12

* Reference implementation

Merge tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

From Simon Horman:
Renesas ARM-based SoC DT updates for v3.12

* Reference implementation for kzm9d board
* Add MMCIF and SDHI DT templates for r8a7790 and r8a73a4 SoCs
* Use DT for SMP and GIC initialisation on emev2 SoC and kzm9d board
* Add GIO to dtsi of emev2 SoC
* Update dts command line of kzm9d board
* Add CPUFreq support to ape6evm board
* Add I2C controller DT nodes to r8a73a4 SoC

* tag 'renesas-dt-for-v3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
ARM: shmobile: Add SMSC ethernet chip to KZM9D DT reference
ARM: shmobile: KZM9D DT reference implementation
ARM: shmobile: r8a7790: add MMCIF and SDHI DT templates
ARM: shmobile: r8a73a4: add MMCIF and SDHI DT templates
ARM: shmobile: EMEV2 map_io update
ARM: shmobile: Use DT for SMP on EMEV2 and KZM9D
ARM: shmobile: Use DT for GIC on EMEV2 and KZM9D
ARM: shmobile: Add GIO to EMEV2 dtsi
ARM: shmobile: Update KZM9D dts command line
ARM: shmobile: ape6evm: add CPUFreq support
ARM: shmobile: r8a73a4: add I2C controller DT nodes
ARM: shmobile: Remove unused mach/dma.h
ARM: shmobile: r8a7778: remove r8a7778_init_irq()
ARM: shmobile: Fix EMEV2 clock comment typo
ARM: shmobile: Make EMEV2 platform devices more compact
ARM: shmobile: Remove unused EMEV2/KZM9D early console
ARM: shmobile: Remove redundant r8a7790 callback
ARM: shmobile: Remove unused sh73a0 auxdata table
ARM: shmobile: Remove unused sh7372 auxdata table
ARM: shmobile: Remove unused r8a7779 auxdata table
...

Signed-off-by: Olof Johansson <olof@lixom.net>

show more ...

ARM: shmobile: marzen: Switch to DT_MACHINE_START

Convert the marzen board to use DT_MACHINE_START. With this in
place all mach-shmobile boards use DT_MACHINE_START. Also, this
makes it possible for

ARM: shmobile: marzen: Switch to DT_MACHINE_START

Convert the marzen board to use DT_MACHINE_START. With this in
place all mach-shmobile boards use DT_MACHINE_START. Also, this
makes it possible for the r8a7779 SMP code to use DT for CPUs.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: Select USE_OF in Kconfig]
[horms+renesas@verge.net.au: Provide dt_compat in DT_MACHINE_START]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: bockw: add DT reference

This patch adds a sample DT-based Bock-W "reference" implementation.
The use of platform-specific C-code should be avoided
with this configuration as much as p

ARM: shmobile: bockw: add DT reference

This patch adds a sample DT-based Bock-W "reference" implementation.
The use of platform-specific C-code should be avoided
with this configuration as much as possible.

This patch adds new r8a7778_add_dt_devices() which was same stance
of r8a7790_add_dt_devices()

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge commit 'Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux'

This backmerges Linus' merge commit of the latest drm-fixes pull:

commit 549f3a1218ba18fcde11ef0e22b07e6365645

Merge commit 'Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux'

This backmerges Linus' merge commit of the latest drm-fixes pull:

commit 549f3a1218ba18fcde11ef0e22b07e6365645788
Merge: 42577ca 058ca4a
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date: Tue Jul 23 15:47:08 2013 -0700

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

We've accrued a few too many conflicts, but the real reason is that I
want to merge the 100% solution for Haswell concurrent registers
writes into drm-intel-next. But that depends upon the 90% bandaid
merged into -fixes:

commit a7cd1b8fea2f341b626b255d9898a5ca5fabbf0a
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Fri Jul 19 20:36:51 2013 +0100

drm/i915: Serialize almost all register access

Also, we can roll up on accrued conflicts.

Usually I'd backmerge a tagged -rc, but I want to get this done before
heading off to vacations next week ;-)

Conflicts:
drivers/gpu/drm/i915/i915_dma.c
drivers/gpu/drm/i915/i915_gem.c

v2: For added hilarity we have a init sequence conflict around the
gt_lock, so need to move that one, too. Spotted by Jani Nikula.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

show more ...

Merge branch 'master' into for-next

Sync with Linus' master to be able to apply
trivial patche to newer code.

Signed-off-by: Jiri Kosina <jkosina@suse.cz>

ARCH: ARM: shmobile: Remove ag5evm board support

Remove support for the sh73a0 based ag5evm board.

The sh73a0 SoC is continued to be supported using
the kzm9g board.

Acked-by: Magnus Damm <damm@op

ARCH: ARM: shmobile: Remove ag5evm board support

Remove support for the sh73a0 based ag5evm board.

The sh73a0 SoC is continued to be supported using
the kzm9g board.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARCH: ARM: shmobile: Remove kota2 board support

Remove support for the sh73a0 based kota2 board.

The sh73a0 SoC is continued to be supported using
the kzm9g board.

Acked-by: Magnus Damm <damm@open

ARCH: ARM: shmobile: Remove kota2 board support

Remove support for the sh73a0 based kota2 board.

The sh73a0 SoC is continued to be supported using
the kzm9g board.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge branches 'tpu-pwm', 'backlight' and 'soc' into cleanup2-base

ARM: shmobile: Allow ARCH_SHMOBILE_MULTI timer configuration

Move the timer configuration bits to allow use in
case of ARCH_SHMOBILE or ARCH_SHMOBILE_MULTI.

The timers all make use of the regular d

ARM: shmobile: Allow ARCH_SHMOBILE_MULTI timer configuration

Move the timer configuration bits to allow use in
case of ARCH_SHMOBILE or ARCH_SHMOBILE_MULTI.

The timers all make use of the regular driver model
so they are safe to enable for ARCH_MULTIPLATFORM.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: Add EMEV2 and KZM9D to ARCH_SHMOBILE_MULTI

Enable build of EMEV2 and KZM9D DT Reference in
case of ARCH_MULTIPLATFORM and ARCH_SHMOBILE_MULTI.

IS_ENABLED() is leaves the clock-emev2.

ARM: shmobile: Add EMEV2 and KZM9D to ARCH_SHMOBILE_MULTI

Enable build of EMEV2 and KZM9D DT Reference in
case of ARCH_MULTIPLATFORM and ARCH_SHMOBILE_MULTI.

IS_ENABLED() is leaves the clock-emev2.c file out
in case of COMMON_CLK=y.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI

Add ARCH_SHMOBILE_MULTI to mach-shmobile that can be used
to enable ARCH_MULTIPLATFORM on selected SoCs and boards.

The headers stay under arch/arm/mach

ARM: shmobile: Introduce ARCH_SHMOBILE_MULTI

Add ARCH_SHMOBILE_MULTI to mach-shmobile that can be used
to enable ARCH_MULTIPLATFORM on selected SoCs and boards.

The headers stay under arch/arm/mach-shmobile/include/mach/
for now, they can and will be migrated independently over time.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'v3.11-rc2' into patchwork

Linux 3.11-rc2

* tag 'v3.11-rc2': (9535 commits)
Linux 3.11-rc2
ext3: fix a BUG when opening a file with O_TMPFILE flag
ext4: fix a BUG when opening a fil

Merge tag 'v3.11-rc2' into patchwork

Linux 3.11-rc2

* tag 'v3.11-rc2': (9535 commits)
Linux 3.11-rc2
ext3: fix a BUG when opening a file with O_TMPFILE flag
ext4: fix a BUG when opening a file with O_TMPFILE flag
vfs: constify dentry parameter in d_count()
livelock avoidance in sget()
allow O_TMPFILE to work with O_WRONLY
Btrfs: fix wrong write offset when replacing a device
Btrfs: re-add root to dead root list if we stop dropping it
Btrfs: fix lock leak when resuming snapshot deletion
Btrfs: update drop progress before stopping snapshot dropping
arm64: use common reboot infrastructure
arm64: mm: don't treat user cache maintenance faults as writes
arm64: add '#ifdef CONFIG_COMPAT' for aarch32_break_handler()
arm64: Only enable local interrupts after the CPU is marked online
MIPS: kvm: Kconfig: Drop HAVE_KVM dependency from VIRTUALIZATION
um: remove dead code
um: siginfo cleanup
MIPS: Octeon: Fix DT pruning bug with pip ports
uml: Fix which_tmpdir failure when /dev/shm is a symlink, and in other edge cases
um: Fix wait_stub_done() error handling
...

show more ...

Merge branch 'linus' into perf/core

Merge in a v3.11-rc1-ish branch to go from v3.10 based development
to a v3.11 based one.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

ARM: shmobile: select the fixed regulator driver on BockW

34767f8dccc326026f97cd63f759dd36bd83502d
(ARM: mach-shmobile: select the fixed regulator driver on several boards)
decided to select fixed r

ARM: shmobile: select the fixed regulator driver on BockW

34767f8dccc326026f97cd63f759dd36bd83502d
(ARM: mach-shmobile: select the fixed regulator driver on several boards)
decided to select fixed regulator driver on Kconfig.
BockW follows same style.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
[horms+renesas@verge.net.au: Change mach-shmobile to shmobile in changelog]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: lager: Add DT reference

This is sufficient to allow boot of the Lager board with
a console without boards-lager.c compiled into the kernel.
This is an example of a minimal but still u

ARM: shmobile: lager: Add DT reference

This is sufficient to allow boot of the Lager board with
a console without boards-lager.c compiled into the kernel.
This is an example of a minimal but still useful initialisation
of the board using DT as much as possible.

As such it is the same as the boot of Lager that can be achieved
without a board file. The intention of adding this file
is to facilitate further work to allow board specific devices to be
initialised via DT.

Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: ape6evm: add DT reference

This patch adds a sample DT-based APE6EVM "reference" implementation. The
use of platform-specific C-code should be avoided with this configuration
as much a

ARM: shmobile: ape6evm: add DT reference

This patch adds a sample DT-based APE6EVM "reference" implementation. The
use of platform-specific C-code should be avoided with this configuration
as much as possible.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: Make r8a73a4 Arch timer optional

Update the r8a73a4 code to allow using other
timers than Arch timer for clock event

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Si

ARM: shmobile: Make r8a73a4 Arch timer optional

Update the r8a73a4 code to allow using other
timers than Arch timer for clock event

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: Make r8a7790 Arch timer optional

Update the r8a7790 code to allow using other
timers than Arch timer for clock events.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by:

ARM: shmobile: Make r8a7790 Arch timer optional

Update the r8a7790 code to allow using other
timers than Arch timer for clock events.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq

This patch adds support for the Z-clock on r8a73a4 SoCs, which is driving
the Cortex A15 core, and a "cpufreq-cpu0" platform device. A

ARM: shmobile: r8a73a4: implement CPU clock scaling for CPUFreq

This patch adds support for the Z-clock on r8a73a4 SoCs, which is driving
the Cortex A15 core, and a "cpufreq-cpu0" platform device. Adding an
"operating-points" property to the CPU0 DT node and a regulator, this
patch allows platforms to use the generic cpufreq-cpu0 driver to use
SoC's DVFS capabilities.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

ARM: shmobile: KZM9D DT reference implementation

Add a DT reference implementation for the KZM9D board.

Only DT devices are used in this case. UART, STI, GPIO
and SMP / GIC are all provided by emev

ARM: shmobile: KZM9D DT reference implementation

Add a DT reference implementation for the KZM9D board.

Only DT devices are used in this case. UART, STI, GPIO
and SMP / GIC are all provided by emev2.dtsi.

There is still a board specific C file used for enabling
legacy SH clocks. This file will be removed after we have
moved over to common clocks.

Signed-off-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: Do not include trailing blank line in
board-kzm9d-reference.c ]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

show more ...

Merge tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Omap fixes and minor defconfig updates that would be good to
get in be

Merge tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Omap fixes and minor defconfig updates that would be good to
get in before -rc1.

* tag 'omap-for-v3.11/fixes-for-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: omap2plus_defconfig: Enable appended DTB support
ARM: OMAP2+: Enable TI_EDMA in omap2plus_defconfig
ARM: OMAP2+: omap2plus_defconfig: enable DRA752 thermal support by default
ARM: OMAP2+: omap2plus_defconfig: enable TI bandgap driver
ARM: OMAP2+: devices: remove duplicated include from devices.c
ARM: OMAP3: igep0020: Set DSS pins in correct mux mode.
ARM: OMAP2+: N900: enable N900-specific drivers even if device tree is enabled
ARM: OMAP2+: Cocci spatch "ptr_ret.spatch"
ARM: OMAP2+: Remove obsolete Makefile line
ARM: OMAP5: Enable Cortex A15 errata 798181
ARM: scu: provide inline dummy functions when SCU is not present
ARM: OMAP4: sleep: build OMAP4 specific functions only for OMAP4
ARM: OMAP2+: timer: initialize before using oh_name

Signed-off-by: Olof Johansson <olof@lixom.net>

Add/move/change conflicts in arch/arm/mach-omap2/Kconfig resolved.

show more ...

Merge branch 'linus' into timers/urgent

Get upstream changes so we can apply fixes against them

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>