ARM: davinci: da850: Remove legacy clock init

This removes the unused legacy clock init code from
arch/arm/mach-davinci/da850.c.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sek

ARM: davinci: da850: Remove legacy clock init

This removes the unused legacy clock init code from
arch/arm/mach-davinci/da850.c.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: da8xx: add new USB PHY clock init using common clock framework

This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.

The #ifde

ARM: davinci: da8xx: add new USB PHY clock init using common clock framework

This adds the new USB PHY clock init in mach-davinci/usb-da8xx.c using
the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: da850: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.

The #ifdefs ar

ARM: davinci: da850: add new clock init using common clock framework

This adds the new board-specific clock init in mach-davinci/da850.c
using the new common clock framework drivers.

The #ifdefs are needed to prevent compile errors until the entire
ARCH_DAVINCI is converted.

Also clean up the #includes since we are adding some here.

Some CFGCHIP macros were removed because we are now including
linux/mfd/da8xx-cfgchip.h which defines the same values.

Reviewed-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

Merge branch 'for-4.18/alps' into for-linus

hid-alps driver cleanups wrt. t4_read_write_register() handling
from Christophe Jaillet

Merge branch 'next' into for-linus

Prepare input updates for 4.18 merge window.

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* cl

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* clk-spear:
clk: spear: fix WDT clock definition on SPEAr600

* clk-qcom-msm8998:
clk: qcom: Add MSM8998 Global Clock Control (GCC) driver

show more ...

Merge tag 'v4.17-rc6' into next

Sync up with mainline to bring in Atmel controller changes for Caroline.

Merge branch 'drm-intel-next-queued' into gvt-next

Signed-off-by: Zhi Wang <zhi.a.wang@intel.com>

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.inte

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Need d224985a5e31 ("sched/wait, drivers/drm: Convert wait_on_atomic_t()
usage to the new wait_var_event() API") in dinq to be able to fix
https://bugs.f

Merge drm/drm-next into drm-intel-next-queued

Need d224985a5e31 ("sched/wait, drivers/drm: Convert wait_on_atomic_t()
usage to the new wait_var_event() API") in dinq to be able to fix
https://bugs.freedesktop.org/show_bug.cgi?id=106085.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v4.17-rc3' into apparmor-next

Linux v4.17-rc3

Merge in v4.17 for LSM updates

Signed-off-by: John Johansen <john.johansen@canonical.com>

Merge tag 'v4.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.17-rc2

Merge tag 'v4.17-rc2' into next-general

Sync to Linux 4.17-rc2 for developers.

Back merge 'drm-intel-fixes' into gvt-fixes

Need for 4.17-rc1

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
"This release brings up a new platform based on the old ARM9 co

Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC platform updates from Arnd Bergmann:
"This release brings up a new platform based on the old ARM9 core: the
Nuvoton NPCM is used as a baseboard management controller, competing
with the better known ASpeed AST2xx series.

Another important change is the addition of ARMv7-A based chips in
mach-stm32. The older parts in this platform are ARMv7-M based
microcontrollers, now they are expanding to general-purpose workloads.

The other changes are the usual defconfig updates to enable additional
drivers, lesser bugfixes. The largest updates as often are the ongoing
OMAP cleanups, but we also have a number of changes for the older PXA
and davinci platforms this time.

For the Renesas shmobile/r-car platform, some new infrastructure is
needed to make the watchdog work correctly.

Supporting Multiprocessing on Allwinner A80 required a significant
amount of new code, but is not doing anything unexpected"

* tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits)
arm: npcm: modify configuration for the NPCM7xx BMC.
MAINTAINERS: update entry for ARM/berlin
ARM: omap2: fix am43xx build without L2X0
ARM: davinci: da8xx: simplify CFGCHIP regmap_config
ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
ARM: multi_v7_defconfig: add NXP FlexCAN IP support
ARM: multi_v7_defconfig: enable thermal driver for i.MX devices
ARM: multi_v7_defconfig: add RN5T618 PMIC family support
ARM: multi_v7_defconfig: add NXP graphics drivers
ARM: multi_v7_defconfig: add GPMI NAND controller support
ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs
ARM: multi_v7_defconfig: configure I2C driver built-in
arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE
ARM: imx: fix imx6sll-only build
ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well
ARM: mxs_defconfig: Re-sync defconfig
ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver
ARM: imx_v4_v5_defconfig: Re-sync defconfig
arm64: defconfig: enable stmmac ethernet to defconfig
ARM: EXYNOS: Simplify code in coupled CPU idle hot path
...

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.17 merge window.

Merge tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "Miscellaneous DaVinci SoC support improvements for v4.17" from Sekha

Merge tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc

Pull "Miscellaneous DaVinci SoC support improvements for v4.17" from Sekhar Nori:

* rationalization of con_id names for phy clocks to make DT conversion easy

* A patch to move away from syscon as platform device. This is needed for
common clock framework conversion as well as helps get rid of
syscon_regmap_lookup_by_pdevname() by removing the last known user.

* convert mach-davinci to use reset support available in watchdog driver

* a non-critical warning fix. It has been around since beginning so not sending
as a standalone fix for -rc cycle.

* moving mach-davinci clock init to .init_time() for legacy boot. This is
again in preparation for CCF conversion.

* tag 'davinci-for-v4.17/soc' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: move davinci_clk_init() to init_time
ARM: davinci: board-da830-evm: fix unused const variable warning
ARM: davinci: remove watchdog reset
ARM: da8xx: use platform data for CFGCHIP syscon regmap
phy: da8xx-usb: rename clock con_ids

show more ...

ARM: davinci: move davinci_clk_init() to init_time

This moves the call of davinci_clk_init() from map_io to init_time for all
boards.

This is the proper place to init clocks. This is also done in p

ARM: davinci: move davinci_clk_init() to init_time

This moves the call of davinci_clk_init() from map_io to init_time for all
boards.

This is the proper place to init clocks. This is also done in preparation
for moving to the common clock framework.

dm646x is a special case because we need to handle different ref_clk rates
depending on which board is being used. The clock init in this case is
modified to set the rate before registering the clocks instead of using
davinci_set_refclk_rate() to recalculate the entire clock tree after all
of the clocks are registered.

Also, the cpu_clks field is removed from struct davinci_soc_info since it
is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

ARM: davinci: remove watchdog reset

This removes the watchdog reset code. The reset has been moved to
drivers/watchdog/davinci_wdt.c. The watchdog driver registers the reset
with the kernel so defin

ARM: davinci: remove watchdog reset

This removes the watchdog reset code. The reset has been moved to
drivers/watchdog/davinci_wdt.c. The watchdog driver registers the reset
with the kernel so defining a reset for each machine is no longer needed.

Signed-off-by: David Lechner <david@lechnology.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>

show more ...

Merge tag 'v4.15' into next

Sync with mainline to get in trackpoint updates and other changes.

Merge branches 'for-4.16/upstream' and 'for-4.15/upstream-fixes' into for-linus

Pull assorted small fixes queued for merge window.

Merge tag 'v4.15' into x86/pti, to be able to merge dependent changes

Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly

Merge tag 'v4.15' into x86/pti, to be able to merge dependent changes

Time has come to switch PTI development over to a v4.15 base - we'll still
try to make sure that all PTI fixes backport cleanly to v4.14 and earlier.

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge branch 'master' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/torvalds/linux

Merge branches 'topic/twl4030' and 'topic/twl6040' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-twl-breakage

Merge branch 'fix/intel' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel