Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Skip E820 checks for MCFG ECAM regions for new (2016+

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Enumeration:

- Skip E820 checks for MCFG ECAM regions for new (2016+) machines,
since there's no requirement to describe them in E820 and some
platforms require ECAM to work (Bjorn Helgaas)

- Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien
Le Moal)

- Remove last user and pci_enable_device_io() (Heiner Kallweit)

- Wait for Link Training==0 to avoid possible race (Ilpo Järvinen)

- Skip waiting for devices that have been disconnected while
suspended (Ilpo Järvinen)

- Clear Secondary Status errors after enumeration since Master Aborts
and Unsupported Request errors are an expected part of enumeration
(Vidya Sagar)

MSI:

- Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas)

Error handling:

- Mask Genesys GL975x SD host controller Replay Timer Timeout
correctable errors caused by a hardware defect; the errors cause
interrupts that prevent system suspend (Kai-Heng Feng)

- Fix EDR-related _DSM support, which previously evaluated revision 5
but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan)

ASPM:

- Simplify link state definitions and mask calculation (Ilpo
Järvinen)

Power management:

- Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS
apparently doesn't know how to put them back in D0 (Mario
Limonciello)

CXL:

- Support resetting CXL devices; special handling required because
CXL Ports mask Secondary Bus Reset by default (Dave Jiang)

DOE:

- Support DOE Discovery Version 2 (Alexey Kardashevskiy)

Endpoint framework:

- Set endpoint BAR to be 64-bit if the driver says that's all the
device supports, in addition to doing so if the size is >2GB
(Niklas Cassel)

- Simplify endpoint BAR allocation and setting interfaces (Niklas
Cassel)

Cadence PCIe controller driver:

- Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)

Cadence PCIe endpoint driver:

- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)

Freescale Layerscape PCIe controller driver:

- Convert DT binding to YAML (Frank Li)

MediaTek MT7621 PCIe controller driver:

- Add DT binding missing 'reg' property for child Root Ports
(Krzysztof Kozlowski)

- Fix theoretical string truncation in PHY name (Sergio Paracuellos)

NVIDIA Tegra194 PCIe controller driver:

- Return success for endpoint probe instead of falling through to the
failure path (Vidya Sagar)

Renesas R-Car PCIe controller driver:

- Add DT binding missing IOMMU properties (Geert Uytterhoeven)

- Add DT binding R-Car V4H compatible for host and endpoint mode
(Yoshihiro Shimoda)

Rockchip PCIe controller driver:

- Configure endpoint BARs to be 64-bit based on the BAR type, not the
BAR value (Niklas Cassel)

- Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski)

- Set the Subsystem Vendor ID, which was previously zero because it
was masked incorrectly (Rick Wertenbroek)

Synopsys DesignWare PCIe controller driver:

- Restructure DBI register access to accommodate devices where this
requires Refclk to be active (Manivannan Sadhasivam)

- Remove the deinit() callback, which was only need by the
pcie-rcar-gen4, and do it directly in that driver (Manivannan
Sadhasivam)

- Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean
up things like eDMA (Manivannan Sadhasivam)

- Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel
to dw_pcie_ep_init() (Manivannan Sadhasivam)

- Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to
reflect the actual functionality (Manivannan Sadhasivam)

- Call dw_pcie_ep_init_registers() directly from all the glue
drivers, not just those that require active Refclk from the host
(Manivannan Sadhasivam)

- Remove the "core_init_notifier" flag, which was an obscure way for
glue drivers to indicate that they depend on Refclk from the host
(Manivannan Sadhasivam)

TI J721E PCIe driver:

- Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli)

- Add DT binding J722S SoC support (Siddharth Vadapalli)

TI Keystone PCIe controller driver:

- Add DT binding missing num-viewport, phys and phy-name properties
(Jan Kiszka)

Miscellaneous:

- Constify and annotate with __ro_after_init (Heiner Kallweit)

- Convert DT bindings to YAML (Krzysztof Kozlowski)

- Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming
Zhou)"

* tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits)
PCI: Do not wait for disconnected devices when resuming
x86/pci: Skip early E820 check for ECAM region
PCI: Remove unused pci_enable_device_io()
ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io()
PCI: Update pci_find_capability() stub return types
PCI: Remove PCI_IRQ_LEGACY
scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY
scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
Revert "genirq/msi: Provide constants for PCI/IMS support"
Revert "x86/apic/msi: Enable PCI/IMS"
Revert "iommu/vt-d: Enable PCI/IMS"
Revert "iommu/amd: Enable PCI/IMS"
Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support"
...

show more ...

Merge branch 'pci/dt-bindings'

- Add rcar-pci-host missing IOMMU properties (Geert Uytterhoeven)

- Add ti,j721e-pci-host J784S4 Device ID (Siddharth Vadapalli)

- Add ti,j721e-pci-host J722S compat

Merge branch 'pci/dt-bindings'

- Add rcar-pci-host missing IOMMU properties (Geert Uytterhoeven)

- Add ti,j721e-pci-host J784S4 Device ID (Siddharth Vadapalli)

- Add ti,j721e-pci-host J722S compatible string (Siddharth Vadapalli)

- Add ti,am65 num-viewport, phys, and phy-name properties (Jan Kiszka)

- Drop cdns,cdns-pcie-host redundant msi-parent and pci-bus.yaml (Krzysztof
Kozlowski)

- Add mediatek,mt7621 missing reg property for child Root Ports (Krzysztof
Kozlowski)

- Switch bindings from pci-bus.yaml to pci-host-bridge.yaml (Krzysztof
Kozlowski)

- Convert fsl,layerscape host and endpoint bindings to YAML (Frank Li)

- Add rcar-gen4-pci-host R-Car V4H (R8A779G0) compatible strings for both
host and endpoint mode (Yoshihiro Shimoda)

- Add rockchip,rk3399-pcie maxItems for ep-gpios (Krzysztof Kozlowski)

* pci/dt-bindings:
dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios
dt-bindings: PCI: rcar-gen4-pci-ep: Add R-Car V4H compatible
dt-bindings: PCI: rcar-gen4-pci-host: Add R-Car V4H compatible
dt-bindings: PCI: layerscape-pci: Convert to YAML format
dt-bindings: PCI: mediatek,mt7621-pcie: Switch from deprecated pci-bus.yaml
dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yaml
dt-bindings: PCI: mediatek,mt7621: Add missing child node reg
dt-bindings: PCI: cdns,cdns-pcie-host: Drop redundant msi-parent and pci-bus.yaml
dt-bindings: PCI: ti,am65: Fix remaining binding warnings
dt-bindings: PCI: ti,j721e-pci-host: Add support for J722S SoC
dt-bindings: PCI: rcar-pci-host: Add missing IOMMU properties
dt-bindings: PCI: ti,j721e-pci-host: Add device-id for TI's J784S4 SoC

show more ...

dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yaml

dtschema package with core schemas deprecated pci-bus.yaml schema in
favor of pci-host-bridge.yaml. Update all bindings to use th

dt-bindings: PCI: host-bridges: Switch from deprecated pci-bus.yaml

dtschema package with core schemas deprecated pci-bus.yaml schema in
favor of pci-host-bridge.yaml. Update all bindings to use the latter
one.

The difference between pci-bus.yaml and pci-host-bridge.yaml is only in
lack of "reg" property defined by the latter, which should not have any
effect here, because all these bindings define the "reg".

The change is therefore quite trivial, however it requires dtschema
package v2024.02 or newer.

Link: https://lore.kernel.org/linux-pci/20240413151617.35630-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> # Renesas
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.6 merge window.

Merge tag 'v6.4' into next

Sync up with mainline to bring in updates to shared infrastructure.

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to sync drm-misc-next-fixes with drm-misc-next.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patche

Merge branch 'drm-next' of git://anongit.freedesktop.org/drm/drm into msm-next-lumag-base

Merge the drm-next tree to pick up the DRM DSC helpers (merged via
drm-intel-next tree). MSM DSC v1.2 patches depend on these helpers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

show more ...

Merge tag 'v6.4-rc4' into wpan-next/staging

Linux 6.4-rc4

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko

Merge drm/drm-next into drm-intel-gt-next

For conflict avoidance we need the following commit:

c9a9f18d3ad8 drm/i915/huc: use const struct bus_type pointers

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

show more ...

Merge drm/drm-next into drm-intel-next

Backmerge to get some hwmon dependencies.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm/drm-fixes into drm-misc-fixes

Let's bring 6.4-rc1 in drm-misc-fixes to start the new fix cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge drm/drm-next into drm-misc-next

Start the 6.5 release cycle.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_fo

Merge tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
"Resource management:

- Add pci_dev_for_each_resource() and pci_bus_for_each_resource()
iterators

PCIe native device hotplug:

- Fix AB-BA deadlock between reset_lock and device_lock

Power management:

- Wait longer for devices to become ready after resume (as we do for
reset) to accommodate Intel Titan Ridge xHCI devices

- Extend D3hot delay for NVIDIA HDA controllers to avoid
unrecoverable devices after a bus reset

Error handling:

- Clear PCIe Device Status after EDR since generic error recovery now
only clears it when AER is native

ASPM:

- Work around Chromebook firmware defect that clobbers Capability
list (including ASPM L1 PM Substates Cap) when returning from
D3cold to D0

Freescale i.MX6 PCIe controller driver:

- Install imprecise external abort handler only when DT indicates
PCIe support

Freescale Layerscape PCIe controller driver:

- Add ls1028a endpoint mode support

Qualcomm PCIe controller driver:

- Add SM8550 DT binding and driver support

- Add SDX55 DT binding and driver support

- Use bulk APIs for clocks of IP 1.0.0, 2.3.2, 2.3.3

- Use bulk APIs for reset of IP 2.1.0, 2.3.3, 2.4.0

- Add DT "mhi" register region for supported SoCs

- Expose link transition counts via debugfs to help debug low power
issues

- Support system suspend and resume; reduce interconnect bandwidth
and turn off clock and PHY if there are no active devices

- Enable async probe by default to reduce boot time

Miscellaneous:

- Sort controller Kconfig entries by vendor"

* tag 'pci-v6.4-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (56 commits)
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
...

show more ...

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xi

Merge branch 'pci/controller/kconfig'

- Use uniform language in Kconfig menu entries (Bjorn Helgaas)

- Sort controller Kconfig entries by vendor (Bjorn Helgaas)

* pci/controller/kconfig:
PCI: xilinx: Drop obsolete dependency on COMPILE_TEST
PCI: mobiveil: Sort Kconfig entries by vendor
PCI: dwc: Sort Kconfig entries by vendor
PCI: Sort controller Kconfig entries by vendor
PCI: Use consistent controller Kconfig menu entry language
PCI: xilinx-nwl: Add 'Xilinx' to Kconfig prompt
PCI: hv: Add 'Microsoft' to Kconfig prompt
PCI: meson: Add 'Amlogic' to Kconfig prompt
PCI: Use of_property_present() for testing DT property presence
PCI/PM: Extend D3hot delay for NVIDIA HDA controllers
dt-bindings: PCI: qcom: Document msi-map and msi-map-mask properties
PCI: qcom: Add SM8550 PCIe support
dt-bindings: PCI: qcom: Add SM8550 compatible
PCI: qcom: Add support for SDX55 SoC
dt-bindings: PCI: qcom-ep: Fix the unit address used in example
dt-bindings: PCI: qcom: Add SDX55 SoC
dt-bindings: PCI: qcom: Update maintainers entry
PCI: qcom: Enable async probe by default
PCI: qcom: Add support for system suspend and resume
PCI/PM: Drop pci_bridge_wait_for_secondary_bus() timeout parameter
PCI/PM: Increase wait time after resume
PCI: pciehp: Fix AB-BA deadlock between reset_lock and device_lock
PCI: Fix up L1SS capability for Intel Apollo Lake Root Port
PCI: qcom: Expose link transition counts via debugfs
dt-bindings: PCI: qcom: Add "mhi" register region to supported SoCs
PCI: qcom: Rename qcom_pcie_config_sid_sm8250() to reflect IP version
PCI: qcom: Use macros for defining total no. of clocks & supplies
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.4.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.3
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 2.3.2
PCI: qcom: Use bulk clock APIs for handling clocks for IP rev 1.0.0
PCI: qcom: Use bulk reset APIs for handling resets for IP rev 2.1.0
PCI: qcom: Use lower case for hex
PCI: qcom: Add missing macros for register fields
PCI: qcom: Use bitfield definitions for register fields
PCI: qcom: Sort and group registers and bitfield definitions
PCI: qcom: Remove PCIE20_ prefix from register definitions
PCI: qcom: Fix the incorrect register usage in v2.7.0 config
PCI/EDR: Add edr_handle_event() comments
PCI/EDR: Clear Device Status after EDR error recovery
efi/cper: Remove unnecessary aer.h include
dt-bindings: imx6q-pcie: Restruct i.MX PCIe schema
PCI/P2PDMA: Fix pci_p2pmem_find_many() kernel-doc
EISA: Drop unused pci_bus_for_each_resource() index argument
PCI: Make pci_bus_for_each_resource() index optional
PCI: Document pci_bus_for_each_resource()
PCI: Introduce pci_dev_for_each_resource()
PCI: Introduce pci_resource_n()
PCI: ixp4xx: Use PCI_CONF1_ADDRESS() macro
PCI: mt7621: Use dev_info() to log PCIe card detection
PCI: imx6: Install the fault handler only on compatible match
PCI: layerscape: Add EP mode support for ls1028a
PCI: rcar: Avoid defines prefixed with CONFIG
dt-bindings: PCI: convert amlogic,meson-pcie.txt to dt-schema
PCI: kirin: Select REGMAP_MMIO

show more ...