Merge drm/drm-fixes into drm-misc-fixes

Backmerging to get updates from v6.15-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and

Merge drm/drm-next into drm-intel-gt-next

We need
4ba4f1afb6a9 ("perf: Generic hotplug support for a PMU with a scope")
in order to land a i915 PMU simplification and a fix. That landed in 6.12
and we are stuck at 6.9 so lets bump things forward.

Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>

show more ...

Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq driver updates from Thomas Gleixner:

- Support for hard indices on RISC-V. The hart index ident

Merge tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq driver updates from Thomas Gleixner:

- Support for hard indices on RISC-V. The hart index identifies a hart
(core) within a specific interrupt domain in RISC-V's Priviledged
Architecture.

- Rework of the RISC-V MSI driver

This moves the driver over to the generic MSI library and solves the
affinity problem of unmaskable PCI/MSI controllers. Unmaskable
PCI/MSI controllers are prone to lose interrupts when the MSI message
is updated to change the affinity because the message write consists
of three 32-bit subsequent writes, which update address and data. As
these writes are non-atomic versus the device raising an interrupt,
the device can observe a half written update and issue an interrupt
on the wrong vector. This is mitiated by a carefully orchestrated
step by step update and the observation of an eventually pending
interrupt on the CPU which issues the update. The algorithm follows
the well established method of the X86 MSI driver.

- A new driver for the RISC-V Sophgo SG2042 MSI controller

- Overhaul of the Renesas RZQ2L driver

Simplification of the probe function by using devm_*() mechanisms,
which avoid the endless list of error prone gotos in the failure
paths.

- Expand the Renesas RZV2H driver to support RZ/G3E SoCs

- A workaround for Rockchip 3568002 erratum in the GIC-V3 driver to
ensure that the addressing is limited to the lower 32-bit of the
physical address space.

- Add support for the Allwinner AS23 NMI controller

- Expand the IMX irqsteer driver to handle up to 960 input interrupts

- The usual small updates, cleanups and device tree changes

* tag 'irq-drivers-2025-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits)
irqchip/imx-irqsteer: Support up to 960 input interrupts
irqchip/sunxi-nmi: Support Allwinner A523 NMI controller
dt-bindings: irq: sun7i-nmi: Document the Allwinner A523 NMI controller
irqchip/davinci-cp-intc: Remove public header
irqchip/renesas-rzv2h: Add RZ/G3E support
irqchip/renesas-rzv2h: Update macros ICU_TSSR_TSSEL_{MASK,PREP}
irqchip/renesas-rzv2h: Update TSSR_TIEN macro
irqchip/renesas-rzv2h: Add field_width to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add max_tssel to struct rzv2h_hw_info
irqchip/renesas-rzv2h: Add struct rzv2h_hw_info with t_offs variable
irqchip/renesas-rzv2h: Use devm_pm_runtime_enable()
irqchip/renesas-rzv2h: Use devm_reset_control_get_exclusive_deasserted()
irqchip/renesas-rzv2h: Simplify rzv2h_icu_init()
irqchip/renesas-rzv2h: Drop irqchip from struct rzv2h_icu_priv
irqchip/renesas-rzv2h: Fix wrong variable usage in rzv2h_tint_set_type()
dt-bindings: interrupt-controller: renesas,rzv2h-icu: Document RZ/G3E SoC
riscv: sophgo: dts: Add msi controller for SG2042
irqchip: Add the Sophgo SG2042 MSI interrupt controller
dt-bindings: interrupt-controller: Add Sophgo SG2042 MSI
arm64: dts: rockchip: rk356x: Move PCIe MSI to use GIC ITS instead of MBI
...

show more ...

dt-bindings: interrupt-controller: Add risc-v,aplic hart indexes

Document optional property "riscv,hart-indexes"

The RISC-V APLIC specification defines "hart index" in:

https://github.com/riscv/

dt-bindings: interrupt-controller: Add risc-v,aplic hart indexes

Document optional property "riscv,hart-indexes"

The RISC-V APLIC specification defines "hart index" in:

https://github.com/riscv/riscv-aia

Within a given interrupt domain, each of the domain’s harts has a unique
index number in the range 0 to 2^14 − 1 (= 16,383). The index number a
domain associates with a hart may or may not have any relationship to the
unique hart identifier (“hart ID”) that the RISC-V Privileged Architecture
assigns to the hart. Two different interrupt domains may employ entirely
different index numbers for the same set of harts.

Further, this document says in "4.5 Memory-mapped control region for an
interrupt domain":

The array of IDC structures may include some for potential hart index
numbers that are not actual hart index numbers in the domain. For example,
the first IDC structure is always for hart index 0, but 0 is not
necessarily a valid index number for any hart in the domain.

Support arbitrary hart indexes specified in a optional APLIC property
"riscv,hart-indexes" which is specificed as an array of u32 elements, one
per interrupt target. If this property is not specified, fallback to use
the logical hart indices within the domain.

Signed-off-by: Vladimir Kondratiev <vladimir.kondratiev@mobileye.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/all/20250129091637.1667279-2-vladimir.kondratiev@mobileye.com

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 6.12 merge window.

Merge tag 'v6.10' into next

Sync up with mainline to bring in device_for_each_child_node_scoped()
and other newer APIs.

Merge drm-misc-next-2024-07-04 into drm-misc-next-fixes

Let's start the drm-misc-next-fixes cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge drm/drm-next into drm-intel-next

Sync to v6.10-rc3.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-xe-next

Needed to get tracing cleanup and add mmio tracing series.

Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge remote-tracking branch 'drm-misc/drm-misc-next' into HEAD

Merge drm-misc-next tree into the msm-next tree in order to be able to
use HDMI connector framework for the MSM HDMI driver.

Merge drm/drm-next into drm-misc-next

Let's start the new release cycle.

Signed-off-by: Maxime Ripard <mripard@kernel.org>

Merge branch 'tip/x86/cpu'

The Lunarlake patches rely on the new VFM stuff.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>

Merge topic branches 'clkdev' and 'fixes' into for-linus

Merge remote-tracking branch 'drm/drm-fixes' into drm-misc-fixes

v6.10-rc1 is released, forward from v6.9

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Cross merge.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:

- Interrupt storm detection for the l

Merge tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull interrupt subsystem updates from Thomas Gleixner:
"Core code:

- Interrupt storm detection for the lockup watchdog:

Lockups which are caused by interrupt storms are not easy to debug
because there is no information about the events which make the
lockup detector trigger.

To make this more user friendly, provide an extenstion to interrupt
statistics which allows to take snapshots and an interface to
retrieve the delta to the snapshot. Use this new mechanism in the
watchdog code to do a two stage lockup analysis by taking the
snapshot and printing the deltas for the topmost active interrupts
on the second trigger.

Note: This contains both the interrupt and the watchdog changes as
the latter depend on the former obviously.

- Avoid summation loops in the /proc/interrupts output and use the
global counter when possible

- Skip suspended interrupts on CPU hotplug operations to ensure that
they are not delivered before the system resumes the device drivers
when coming out of suspend.

- On CPU hot-unplug interrupts which are affine to the outgoing CPU
are migrated to a different CPU in the affinity mask. This can fail
when the CPUs have no vectors left. Instead of giving up try to
migrate it to any online CPU and thereby breaking the affinity
setting in order to prevent a stale device interrupt which targets
an offline CPU

- The usual small cleanups

Driver code:

- Support for the RISCV AIA MSI controller

- Make the interrupt allocation for the Loongson PCH controller more
flexible to prevent vector exhaustion

- The usual set of cleanups and fixes all over the place"

* tag 'irq-core-2024-05-12' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits)
irqchip/gic-v3-its: Remove BUG_ON in its_vpe_irq_domain_alloc
cpuidle: Avoid explicit cpumask allocation on stack
irqchip/sifive-plic: Avoid explicit cpumask allocation on stack
irqchip/riscv-aplic-direct: Avoid explicit cpumask allocation on stack
irqchip/loongson-eiointc: Avoid explicit cpumask allocation on stack
irqchip/gic-v3-its: Avoid explicit cpumask allocation on stack
irqchip/irq-bcm6345-l1: Avoid explicit cpumask allocation on stack
cpumask: Introduce cpumask_first_and_and()
irqchip/irq-brcmstb-l2: Avoid saving mask on shutdown
genirq: Reuse irq_is_nmi()
genirq/cpuhotplug: Retry with cpu_online_mask when migration fails
genirq/cpuhotplug: Skip suspended interrupts when restoring affinity
arm64: dts: st: Add interrupt parent to pinctrl on stm32mp251
arm64: dts: st: Add exti1 and exti2 nodes on stm32mp251
ARM: dts: stm32: List exti parent interrupts on stm32mp131
ARM: dts: stm32: List exti parent interrupts on stm32mp151
arm64: Kconfig.platforms: Enable STM32_EXTI for ARCH_STM32
irqchip/stm32-exti: Mark events reserved with RIF configuration check
irqchip/stm32-exti: Skip secure events
irqchip/stm32-exti: Convert driver to standard PM
...

show more ...

dt-bindings: interrupt-controller: Add RISC-V advanced PLIC

Add DT bindings document for RISC-V advanced platform level interrupt
controller (APLIC) defined by the RISC-V advanced interrupt architec

dt-bindings: interrupt-controller: Add RISC-V advanced PLIC

Add DT bindings document for RISC-V advanced platform level interrupt
controller (APLIC) defined by the RISC-V advanced interrupt architecture
(AIA) specification.

Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://lore.kernel.org/r/20240307140307.646078-6-apatel@ventanamicro.com

show more ...