Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other s

Merge tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:

- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat

- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.

- fpga subsystem driver updates and additions

- mhi subsystem updates

- Coresight driver updates

- gnss subsystem updates

- extcon driver updates

- icc subsystem updates

- fsi subsystem updates

- nvmem subsystem and driver updates

- misc driver updates

- speakup driver additions for new features

- lots of tiny driver updates and cleanups

All of these have been in the linux-next tree for a while with no
reported issues"

* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...

show more ...

Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.1

This incl

Merge tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next

Jonathan writes:

1st set of IIO new device support, features and cleanup for 6.1

This includes Nuno Sa's work to move the IIO core over to generic firmware
properties rather than having DT specific code paths. Combined with Andy
Shevchenko's long term work on drivers, this leaves IIO in a good state for
handling other firmware types.

New device support
- liteon,ltrf216a
* New driver and dt bindings to support this Light sensor.
- maxim,max11205
* New driver for this 16bit single channel ADC.
- memsensing,msa311
* New driver for this accelerometer. Includes a string helper for read/write.
- richtek,rtq6056
* New driver and dt binding to support this current monitor used to measure
power usage.
- yamaha,yas530
* Support the YAS537 variant (series includes several fixes for other parts
and new driver features).

Staging graduation
- adi,ad7746 CDC. Cleanup conducted against set of roadtest tests using
the posted RFC of that framework.

Features
- core
* Large rework to make all the core IIO code use generic firmware properties.
Includes switching some drivers over as well using newly provided
generic interfaces and allowing removal of DT specific ones.
* Support for gesture event types for single and double tap. Used in
bosch,bma400.
- atmel,at91-sama5d2
* Add support for temperature sensor which uses two muxed inputs to estimate
the temperature.
* Handle trackx bits of EMR register to improve temp sampling accuracy.
* Runtime PM support.
- liteon,ltrf216a
* Add a _raw channel output to allow working around an issue with
differing conversions equations that breaks some user space controls.
- mexelis,mlx90632
* Support regulator control.
- ti,tsc2046
* External reference voltage support.

Clean up and minor fixes
- Tree-wide
* devm_clk_get_enabled() replacements of opencoded equivalent.
* Remaining IIO_DMA_MINALIGN conversions (the staging/iio drivers).
* Various minor warning and similar cleanup such as missing static
markings.
* strlcpy() to strscpy() for cases where return value not checked.
* provide units.h entries for more HZ units and use them in drivers.
- dt-bindings cleanup
* Drop maintainers listss where the email address is bouncing.
* Switch spi devices over to using spi-peripheral.yaml
* Add some missing unevaluatedProperties / additionalProperties: false
entries.
- ABI docs
* Add some missing channel type specific sampling frequency entries.
* Add parameter names for callback parameters.
- MAINTAINERS
* Fix wrong ADI forum links.
- core
* lockdep class per device, to avoid an issue with nest when one IIO
device is the consumer of another.
* White space tweaks.
- asc,dlhl60d
* Use get_unaligned_be24 to avoid some unusual data manipulation and masking.
- atmel,at91-sama5d2
* Fix wrong max value.
* Improve error handling when measuring pressure and touch.
* Add locks to remove races on updating oversampling / sampling freq.
* Add missing calls in suspend and resume path to ensure state is correctly
brought up if buffered capture was in use when suspend happened.
* Error out of write_raw() callback if buffered capture enabled to avoid
unpredictable behavior.
* Handle different versions having different oversampling ratio support and
drop excess error checking.
* Cleanup magic value defines where the name is just the value and hence
hurts readability.
* Use read_avail() callback to provide info on possible oversampling ratios.
* Correctly handle variable bit depth when doing oversampling on different
supported parts. Also handle higher oversampling ratios.
- fsl,imx8qxp
* Don't ignore errors from regulator_get_voltage() so as to avoid some
very surprising scaling.
- invensense,icp10100
* Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS. UNIVERSAL rarely made
sense and is now deprecated. In this driver we just avoid double disabling
in some paths.
- maxim,max1363
* Drop consumer channel map provision by platform data. There have been
better ways of doing this for years and there are no in tree users.
- microchip,mcp3911
* Update status to maintained.
- qcom,spmi-adc5
* Support measurement of LDO output voltage.
- qcom,spmi-adc
* Add missing channel available on SM6125 SoC.
- st,stmpe
* Drop requirement on node name in binding now that driver correctly
doesn't enforce it.
- stx104
* Move to more appropriate addac directory
- ti,am335x
* Document ti,am654-adc compatible already in use in tree.
- ti,hmc5843
* Move dev_pm_ops out of header and use new pm macros to handle export.
- yamaha,yas530
* Minor cleanups.

* tag 'iio-for-6.1a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (142 commits)
iio: pressure: icp10100: Switch from UNIVERSAL to DEFINE_RUNTIME_DEV_PM_OPS().
iio: adc: max1363: Drop provision to provide an IIO channel map via platform data
iio: accel: bma400: Add support for single and double tap events
iio: Add new event type gesture and use direction for single and double tap
iio: Use per-device lockdep class for mlock
iio: adc: add max11205 adc driver
dt-bindings: iio: adc: Add max11205 documentation file
iio: magnetometer: yamaha-yas530: Use dev_err_probe()
iio: magnetometer: yamaha-yas530: Make strings const in chip info
iio: magnetometer: yamaha-yas530: Use pointers as driver data
iio: adc: tsc2046: silent spi_device_id warning
iio: adc: tsc2046: add vref support
dt-bindings: iio: adc: ti,tsc2046: add vref-supply property
iio: light: ltrf216a: Add raw attribute
dt-bindings: iio: Add missing (unevaluated|additional)Properties on child nodes
MAINTAINERS: fix Analog Devices forum links
iio/accel: fix repeated words in comments
dt-bindings: iio: accel: add dt-binding schema for msa311 accel driver
iio: add MEMSensing MSA311 3-axis accelerometer driver
dt-bindings: vendor-prefixes: add MEMSensing Microsystems Co., Ltd.
...

show more ...

dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows u

dt-bindings: iio: frequency: adf4371: use spi-peripheral-props.yaml

Instead of listing directly properties typical for SPI peripherals,
reference the spi-peripheral-props.yaml schema. This allows using all
properties typical for SPI-connected devices, even these which device
bindings author did not tried yet.

Remove the spi-* properties which now come via spi-peripheral-props.yaml
schema, except for the cases when device schema adds some constraints
like maximum frequency.

While changing additionalProperties->unevaluatedProperties, put it in
typical place, just before example DTS.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220816124321.67817-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.12 merge window.

Merge tag 'v5.11' into next

Merge with mainline to get latest APIs and device tree bindings.

Merge remote-tracking branch 'spi/for-5.10' into spi-linus

Merge remote-tracking branch 'asoc/for-5.10' into asoc-linus

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-nex

Merge branches 'for-next/kvm-build-fix', 'for-next/va-refactor', 'for-next/lto', 'for-next/mem-hotplug', 'for-next/cppc-ffh', 'for-next/pad-image-header', 'for-next/zone-dma-default-32-bit', 'for-next/signal-tag-bits' and 'for-next/cmdline-extended' into for-next/core

* for-next/kvm-build-fix:
: Fix KVM build issues with 64K pages
KVM: arm64: Fix build error in user_mem_abort()

* for-next/va-refactor:
: VA layout changes
arm64: mm: don't assume struct page is always 64 bytes
Documentation/arm64: fix RST layout of memory.rst
arm64: mm: tidy up top of kernel VA space
arm64: mm: make vmemmap region a projection of the linear region
arm64: mm: extend linear region for 52-bit VA configurations

* for-next/lto:
: Upgrade READ_ONCE() to RCpc acquire on arm64 with LTO
arm64: lto: Strengthen READ_ONCE() to acquire when CONFIG_LTO=y
arm64: alternatives: Remove READ_ONCE() usage during patch operation
arm64: cpufeatures: Add capability for LDAPR instruction
arm64: alternatives: Split up alternative.h
arm64: uaccess: move uao_* alternatives to asm-uaccess.h

* for-next/mem-hotplug:
: Memory hotplug improvements
arm64/mm/hotplug: Ensure early memory sections are all online
arm64/mm/hotplug: Enable MEM_OFFLINE event handling
arm64/mm/hotplug: Register boot memory hot remove notifier earlier
arm64: mm: account for hotplug memory when randomizing the linear region

* for-next/cppc-ffh:
: Add CPPC FFH support using arm64 AMU counters
arm64: abort counter_read_on_cpu() when irqs_disabled()
arm64: implement CPPC FFH support using AMUs
arm64: split counter validation function
arm64: wrap and generalise counter read functions

* for-next/pad-image-header:
: Pad Image header to 64KB and unmap it
arm64: head: tidy up the Image header definition
arm64/head: avoid symbol names pointing into first 64 KB of kernel image
arm64: omit [_text, _stext) from permanent kernel mapping

* for-next/zone-dma-default-32-bit:
: Default to 32-bit wide ZONE_DMA (previously reduced to 1GB for RPi4)
of: unittest: Fix build on architectures without CONFIG_OF_ADDRESS
mm: Remove examples from enum zone_type comment
arm64: mm: Set ZONE_DMA size based on early IORT scan
arm64: mm: Set ZONE_DMA size based on devicetree's dma-ranges
of: unittest: Add test for of_dma_get_max_cpu_address()
of/address: Introduce of_dma_get_max_cpu_address()
arm64: mm: Move zone_dma_bits initialization into zone_sizes_init()
arm64: mm: Move reserve_crashkernel() into mem_init()
arm64: Force NO_BLOCK_MAPPINGS if crashkernel reservation is required
arm64: Ignore any DMA offsets in the max_zone_phys() calculation

* for-next/signal-tag-bits:
: Expose the FAR_EL1 tag bits in siginfo
arm64: expose FAR_EL1 tag bits in siginfo
signal: define the SA_EXPOSE_TAGBITS bit in sa_flags
signal: define the SA_UNSUPPORTED bit in sa_flags
arch: provide better documentation for the arch-specific SA_* flags
signal: clear non-uapi flag bits when passing/returning sa_flags
arch: move SA_* definitions to generic headers
parisc: start using signal-defs.h
parisc: Drop parisc special case for __sighandler_t

* for-next/cmdline-extended:
: Add support for CONFIG_CMDLINE_EXTENDED
arm64: Extend the kernel command line from the bootloader
arm64: kaslr: Refactor early init command line parsing

show more ...

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Li

Merge remote-tracking branch 'origin/master' into perf/core

Further perf/core patches will depend on:

d3f7b1bb2040 ("mm/gup: fix gup_fast with dynamic page table folding")

which is already in Linus' tree.

show more ...

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kerne

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:

645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")

Since the new code *should* be fine without nesting.

Knock on wood ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with v5.10-rc2 and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge tag 'v5.10-rc1' into kvmarm-master/next

Linux 5.10-rc1

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge tag 'drm-intel-fixes-2020-10-29' into gvt-fixes

Backmerge for 5.10-rc1 to apply one extra APL fix.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

Merge tag 'v5.10-rc1' into regulator-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into spi-5.10

Linux 5.10-rc1

Merge tag 'v5.10-rc1' into asoc-5.10

Linux 5.10-rc1

Merge tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

- Update dtc to upstream version v1.6.0-31-gcbca977ea121

- d

Merge tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

- Update dtc to upstream version v1.6.0-31-gcbca977ea121

- dtx_diff help text reformatting

- Speed-up validation time for binding and dtb checks using json for
intermediate files

- Add support for running yamllint on DT schema files

- Remove old booting-without-of.rst

- Extend the example schema to address common issues

- Cleanup handling of additionalProperties/unevaluatedProperties

- Ensure all DSI controller schemas reference dsi-controller.yaml

- Vendor prefixes for Zealz, Wandbord/Technexion, Embest RIoT, Rex,
DFI, and Cisco Meraki

- Convert at25, SPMI bus, TI hwlock, HiSilicon Hi3660 USB3 PHY, Arm
SP805 watchdog, Arm SP804, and Samsung 11-pin USB connector to DT
schema

- Convert HiSilicon SoC and syscon bindings to DT schema

- Convert SiFive Risc-V L2 cache, PLIC, PRCI, and PWM to DT schema

- Convert i.MX bindings for w1, crypto, rng, SIM, PM, DDR, SATA, vf610
GPIO, and UART to DT schema

- Add i.MX 8M compatible strings

- Add LM81 and DS1780 as trivial devices

- Various missing properties added to fix dtb validation warnings

* tag 'devicetree-for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (111 commits)
dt-bindings: misc: explicitly add #address-cells for slave mode
spi: dt-bindings: spi-controller: explicitly require #address-cells=<0> for slave mode
dt: Remove booting-without-of.rst
dt-bindings: update usb-c-connector example
dt-bindings: arm: hisilicon: add missing properties into cpuctrl.yaml
dt-bindings: arm: hisilicon: add missing properties into sysctrl.yaml
dt-bindings: pwm: imx: document i.MX compatibles
scripts/dtc: Update to upstream version v1.6.0-31-gcbca977ea121
dt-bindings: Add running yamllint to dt_binding_check
dt-bindings: powerpc: Add a schema for the 'sleep' property
dt-bindings: pinctrl: sirf: Fix typo abitrary
dt-bindings: pinctrl: qcom: Fix typo abitrary
dt-bindings: Explicitly allow additional properties in common schemas
dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'
dt-bindings: Add missing 'unevaluatedProperties'
Docs: Fixing spelling errors in Documentation/devicetree/bindings/
dt-bindings: arm: hisilicon: convert Hi6220 domain controller bindings to json-schema
dt-bindings: riscv: convert pwm bindings to json-schema
dt-bindings: riscv: convert plic bindings to json-schema
dt-bindings: fu540: prci: convert PRCI bindings to json-schema
...

show more ...

dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'

In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as

dt-bindings: Use 'additionalProperties' instead of 'unevaluatedProperties'

In cases where we don't reference another schema, 'additionalProperties'
can be used instead. This is preferred for now as 'unevaluatedProperties'
support isn't implemented yet.

In a few cases, this means adding some missing property definitions of
which most are for SPI bus properties. 'unevaluatedProperties' is not going
to work for the SPI bus properties anyways as they are evaluated from the
parent node, not the SPI child node.

Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20201005183830.486085-3-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

dt-bindings: Add missing 'unevaluatedProperties'

This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
i

dt-bindings: Add missing 'unevaluatedProperties'

This doesn't yet do anything in the tools, but make it explicit so we can
check either 'unevaluatedProperties' or 'additionalProperties' is present
in schemas.

'unevaluatedProperties' is appropriate when including another schema (via
'$ref') and all possible properties and/or child nodes are not
explicitly listed in the schema with the '$ref'.

This is in preparation to add a meta-schema to check for missing
'unevaluatedProperties' or 'additionalProperties'. This has been a
constant source of review issues.

Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@kernel.org>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Vinod Koul <vkoul@kernel.org>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://lore.kernel.org/r/20201005183830.486085-2-robh@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 5.4 merge window.

Merge branch 'for-next' into for-linus

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge branch 'master' into for-5.4/logitech

Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid mer

Merge remote-tracking branch 'remotes/powerpc/topic/ppc-kvm' into kvm-ppc-next

This merges in fixes for the XIVE interrupt controller which touch both
generic powerpc and PPC KVM code. To avoid merge conflicts, these
commits will go upstream via the powerpc tree as well as the KVM tree.

Signed-off-by: Paul Mackerras <paulus@ozlabs.org>

show more ...