| #
2eff01ee |
| 29-Nov-2024 |
Linus Torvalds <torvalds@linux-foundation.org> |
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char
Merge tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO/whatever driver subsystem updates from Greg KH:
"Here is the 'big and hairy' char/misc/iio and other small driver
subsystem updates for 6.13-rc1.
Loads of things in here, and even a fun merge conflict!
- rust misc driver bindings and other rust changes to make misc
drivers actually possible.
I think this is the tipping point, expect to see way more rust
drivers going forward now that these bindings are present. Next
merge window hopefully we will have pci and platform drivers
working, which will fully enable almost all driver subsystems to
start accepting (or at least getting) rust drivers.
This is the end result of a lot of work from a lot of people,
congrats to all of them for getting this far, you've proved many of
us wrong in the best way possible, working code :)
- IIO driver updates, too many to list individually, that subsystem
keeps growing and growing...
- Interconnect driver updates
- nvmem driver updates
- pwm driver updates
- platform_driver::remove() fixups, loads of them
- counter driver updates
- misc driver updates (keba?)
- binder driver updates and fixes
- loads of other small char/misc/etc driver updates and additions,
full details in the shortlog.
All of these have been in linux-next for a while, with no other
reported issues other than that merge conflict"
* tag 'char-misc-6.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (401 commits)
mei: vsc: Fix typo "maintstepping" -> "mainstepping"
firmware: Switch back to struct platform_driver::remove()
misc: isl29020: Fix the wrong format specifier
scripts/tags.sh: Don't tag usages of DEFINE_MUTEX
fpga: Switch back to struct platform_driver::remove()
mei: vsc: Improve error logging in vsc_identify_silicon()
mei: vsc: Do not re-enable interrupt from vsc_tp_reset()
dt-bindings: spmi: qcom,x1e80100-spmi-pmic-arb: Add SAR2130P compatible
dt-bindings: spmi: spmi-mtk-pmif: Add compatible for MT8188
spmi: pmic-arb: fix return path in for_each_available_child_of_node()
iio: Move __private marking before struct element priv in struct iio_dev
docs: iio: ad7380: add adaq4370-4 and adaq4380-4
iio: adc: ad7380: add support for adaq4370-4 and adaq4380-4
iio: adc: ad7380: use local dev variable to shorten long lines
iio: adc: ad7380: fix oversampling formula
dt-bindings: iio: adc: ad7380: add adaq4370-4 and adaq4380-4 compatible parts
bus: mhi: host: pci_generic: Use pcim_iomap_region() to request and map MHI BAR
bus: mhi: host: Switch trace_mhi_gen_tre fields to native endian
misc: atmel-ssc: Use of_property_present() for non-boolean properties
misc: keba: Add hardware dependency
...
show more ...
|
| #
ffb4b4ed |
| 19-Oct-2024 |
Greg Kroah-Hartman <gregkh@linuxfoundation.org> |
Merge tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.1
Merge tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next
Jonathan writes:
IIO: 1st set of new device support, features and cleanup for 6.13
Changes in take2:
- Additional patch to drop the accidentally added empty file.
- Tidy up of a duplicate include.
Two merges of other trees.
6.12-rc2:
To pull in the move of unaligned.h from include/asm to include/linux
This was to resolve issues in linux-next.
pwm/duty_offset-for6.13-rc1@
PWM infrastructure that is use di the AD7625 ADC driver.
New device support
==================
adi,ad7173
- Add support for the AD4113 8 channel ADC.
adi,ad7606
- Add support for the AD7606C-16 and AD7606C-18 which have higher precision
and support bipolar and differential channels. A lot of driver
rework was needed to add the additional flexibility needed to support
these parts.
adi,ad7625
- New driver supporting AD7625, AD7626, AD7960 and AD7961 LVDS connected
ADCs. Interface uses a combination of a PWM control and an IIO backend
(currently a custom FPGA IP).
adi,ad8460
- New driver for the ad8460 Waveform DAC. This high speed device is
driven by a custom IP via a DMAEngine buffer.
bosch,bmi270
- New driver for this 6-axis IMU. A later patch adds SPI support.
gehc,pmc-adc
- New driver for this GE Healthcare ADC 16-channel 16 bit ADC.
invensense,mpu6050
- Add support for IAM-20680HT and IAM-20680HP variants of the IAM-20680
IMU that have better specifications in various ways including larger
FIFO sizes.
vishay,vl6030
- Support the veml7700, a stripped down veml6030 ambient light sensor.
- Support the veml6035 ambient light sensor.
Features
========
liteon,ltr390
- Allow configuration of sampling frequency
- Support suspend and resume
- Add interrupt support including threshold events + control over
event reporting persistence.
st,vl53l0x
- Add support for continuous mode via IIO buffer support and a dataready
trigger.
ti,tmp0006
- Add triggered buffer support using data ready interrupt.
vishay,vl6030
- Add regulator control support.
vishay,vl6070
- Add regulator control support.
vishay,vl6180
- Allow configuration of waiting between continuous samples.
- Use the interrupt, if available, for single shot captures
- Support continuous mode via the IIO triggered buffer interfaces.
Cleanups and minor fixes
========================
tools/event monitor
- Free dev_dir_name.
treewide
- Introduce aligned_s64 type for timestamps to replace
s64 __aligned(8). Initial use in a few drivers - many others to follow.
- Use dev_get_platform_data() instead of open-coding the access.
- InvenSense email address and maintainer updates to reflect
move to the tdk domain after acquisition.
- Switch platform drivers from remove_new() back to remove() now all
rework this was enabling is done.
- More use of device_for_each_child_node_scoped() to remove need for manual
caling of fwnode_handle_put() in early exits from the loop.
- Use IIO_MAP() macro to replace some open-coded versions.
- Constify struct iio_map arrays.
- Use irq_get_trigger_type(irq) rather than
irqd_get_trigger_type(irq_get_irq_data(irq);
core
- unsigned to unsigned int.
adi,ad3552r
- Fix to low a limit on max SPI clock speed. No rush to upstream this
one as the binding that uses the higher speed will merge via this
tree once ready.
adi,ad5770r
- Use get_unaligned_le16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
adi,ad7606
- Use read_avail() callback to handle the various _available attributes.
- Wrap up all data related to channel scaling into a single structure as
the use of this gets more complex for the -16 and -18 parts.
adi,adf4371
- Use chip_info structures and spi_get_device_match_data()
- Drop spi_set_drvdata() as unused.
- Reduce scope of struct clock as only touched in probe().
- Use dev_err_probe() where appropriate.
adi,axi-dac
- Improve register naming to make field and register association clearer.
- Fix a wrong register bit.
amlogic,meson8-saradc
- Allow the meson8-saradc to have the amlogic,hhi-sysctrl property.
bosch,bmp280
- Use u8 for the DMA buffer to avoid implication of other types given it
can contain be24 data.
- Use unsigned types to store raw values to make it clear they cannot be
negative.
- Drop unnecessary check for errors after IIR filter update.
- Support soft reset to get device to know state on driver load.
- Use bulk reads to retrieve the humidity calibration data.
dynaimage,al3010
- Make sure to powerdown device in error paths.
invensense,icm42600
- Add missing i2c_device-id tables.
kionix,kmx61
- Drop ACPI IDs that are not associated with valid ACPI vendor IDs
and for which there is no evidence they are in use in real devices.
liteon,ltrf261a
- Document a bad compatible that we are supporting because it is in
the wild in the Valve Steam Deck via ACPI PRP0001.
maxim,max1363
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
mediatek,mt6360
- Use get_unaligned_be16() instead of open-coding. Note this caused
a merge issue in linux-next as unaligned.h has moved.
microchip,pac1921
- Drop various unnecessary type casts that were suggested by
Wconversion compiler warnings which we do not use in IIO.
Remove them because they hurt readability in cases where it is clear
not overflow can occur.
rohm,rpr0521
- Use iio_poll_func_store_time() rather than open-coding a similar solution.
semtech,sx9324
- Make sx_common_get_raw_register() local to the only code that uses it.
- Drop unnecessary acpi.h include.
st,vl53l0x
- Check the part ID register and print an info message if it is not what
is expected.
vishay,veml6030
- Fix DT binding file name to include vishay
- Use regmap_set_bits() for case where all bits are set.
- Use dev_err_probe() where appropriate.
- Add missing delay after powering up in resume path.
- Drop a processed accessor for the white channel as there is no public
information to allow a specific scale to be established.
- Use read_avail() to replace explicit custom _available attributes.
vishay,veml6070
- Use guard() to allow early returns.
- Add a devm callback to unregister the i2c device.
- Use devm_iio_device_register() to simplify removal code.
Various other minor improvements not called out explicitly.
* tag 'iio-for-6.13a-take2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (161 commits)
iio: imu: bmi270: Remove duplicated include in bmi270_i2c.c
iio: adc: ad7606: Drop spurious empty file.
iio: light: rpr0521: Use generic iio_pollfunc_store_time()
iio: light: vl6180: Add support for Continuous Mode
iio: light: vl6180: Added Interrupt support for single shot access
iio: light: vl6180: Add configurable inter-measurement period support
MAINTAINERS: add entry for VEML6030 ambient light sensor driver
iio: light: veml6030: add support for veml7700
dt-bindings: iio: light: veml6030: add veml7700
iio: light: veml6035: fix read_avail in no_irq case for veml6035
iio: dac: adi-axi-dac: update register names
iio: dac: adi-axi-dac: fix wrong register bitfield
docs: iio: new docs for ad7625 driver
iio: adc: ad7625: add driver
dt-bindings: iio: adc: add AD762x/AD796x ADCs
iio: Convert unsigned to unsigned int
iio: pressure: bmp280: Fix uninitialized variable
iio: Switch back to struct platform_driver::remove()
iio: imu: bmi323: remove redundant register definition
iio: frequency: adf4371: make use of dev_err_probe()
...
show more ...
|
| #
29301cc3 |
| 09-Sep-2024 |
Trevor Gamblin <tgamblin@baylibre.com> |
dt-bindings: iio: adc: add AD762x/AD796x ADCs
Add a binding specification for the Analog Devices Inc. AD7625,
AD7626, AD7960, and AD7961 ADCs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
dt-bindings: iio: adc: add AD762x/AD796x ADCs
Add a binding specification for the Analog Devices Inc. AD7625,
AD7626, AD7960, and AD7961 ADCs.
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Link: https://patch.msgid.link/20240909-ad7625_r1-v5-1-60a397768b25@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
show more ...
|