Merge tag 'v5.9' into next

Sync up with mainline to bring in the latest DTS files.

Merge tag 'v5.10-rc4' into devel

Linux 5.10-rc4

Merge branch 'for-rc' into rdma.git

From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git

The rc RDMA branch is needed due to dependencies on the next patches.

Signed-off-by: Jason Gu

Merge branch 'for-rc' into rdma.git

From https://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma.git

The rc RDMA branch is needed due to dependencies on the next patches.

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

show more ...

Merge series "regulator: bd718x7: support voltage scaling" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

RFC for adding a support for typical voltage scaling connection

In few occasions

Merge series "regulator: bd718x7: support voltage scaling" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

RFC for adding a support for typical voltage scaling connection

In few occasions there has been a need to scale the voltage output
from bucks on BD71837. Usually this is done when buck8 is used to
power specific GPU which can utilize voltages down to 0.7V. As lowest
the buck8 on BD71837 can go is 0.8V, and external connection is used to
scale the voltages.

The BD71837, BD71847 and BD71850 bucks can be adjusted by pulling up the
feedback pin using suitable voltage/resistors.

|---------------|
| buck 8 |-------+----->Vout
| | |
|---------------| |
| |
| |
+-------+--R2----+
|
R1
|
V FB-pull-up

This will scale the voltage as follows:
- Vout_o = Vo - (Vpu - Vo)*R2/R1
- Linear_step = step_orig*(R1+R2)/R1
where:
Vout_o is adjusted voltage output at vsel reg value 0
Vo is original voltage output at vsel reg value 0
Vpu is the pull-up voltage V FB-pull-up in the picture
R1 and R2 are resistor values.

>From HW point of view this does not need to be limited to buck 8. This
connection can be used to adjust output from any of the bucks on
BD71837/47/50.

As this seems to be a 'de-facto' way to scale the voltages on BD71837 it
might be a good idea to support computing the new voltage ranges for
bucks based on the V-pull-up and resistor R1/R2 values given from
device-tree. This allows describing the external HW connection using DT
to correctly scale the voltages.

This RFC uses "rohm,feedback-pull-up-r1-ohms" and
"rohm,feedback-pull-up-r2-ohms" to provide the resistor values - but
these names (without the picture) might not be too descriptive. I am
grateful for all suggestions as better and more descriptive names.

This patch series is an RFC because this connection feels somewhat
"hacky". OTOH - when hack becomes widely used, it is less of an hack and
more of a standard - and occasionally supporting HW hacks using SW may
benefit us all, right? :)

The other thing some projects do is allowing the change of BD71837 buck8
voltages when buck8 is enabled. This however will introduce voltage
spikes as buck8 was not originally designed for this. The specific HW
platform must be evaluated to be able to tolerate these spikes. Thus
this patch series does not support buck8 voltage changes when buck8 is
enabled. I wonder if this should be allowed per some config option(?) I
don't want to help people frying their boards... Opinions? Is there
suggested way of allowing this type of features at own risk? Config or
even Some #ifdef which is not listed in Kconfig? Device-tree property?
If you have (good) suggestions I could add the optional (non default)
DVS support for non DVS bucks on BD71837.

Matti Vaittinen (3):
dt-bindings: regulator: BD71837 support commonly used feedback
connection
dt-bindings: regulator: BD71847 support commonly used feedback
connection
regulator: bd718x7: Support external connection to scale voltages

.../regulator/rohm,bd71837-regulator.yaml | 48 +++++
.../regulator/rohm,bd71847-regulator.yaml | 49 ++++++
drivers/regulator/bd718x7-regulator.c | 164 +++++++++++++++++-
3 files changed, 254 insertions(+), 7 deletions(-)

base-commit: 3cea11cd5e3b00d91caf0b4730194039b45c5891
--
2.21.3

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

show more ...

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kerne

Merge branch 'linus' into perf/kprobes

Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c

Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:

645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")

Since the new code *should* be fine without nesting.

Knock on wood ...

Signed-off-by: Ingo Molnar <mingo@kernel.org>

show more ...

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Merge drm/drm-next into drm-intel-next-queued

Catch up with v5.10-rc2 and drm-misc-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'core/urgent' into core/entry

Pick up the entry fix before further modifications.

Merge 5.10-rc2 into tty-next

We need the tty/vt/serial fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge drm/drm-next into drm-misc-next

Daniel needs -rc2 in drm-misc-next to merge some patches

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge 5.10-rc2 into usb-next

We need the USB fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.10-rc2 into staging-next

We need the staging fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge 5.10-rc2 into char-misc-next

We need the fixes/changes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
"Here is one tiny debugfs change to fix u

Merge tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core and documentation fixes from Greg KH:
"Here is one tiny debugfs change to fix up an API where the last user
was successfully fixed up in 5.10-rc1 (so it couldn't be merged
earlier), and a much larger Documentation/ABI/ update to the files so
they can be automatically parsed by our tools.

The Documentation/ABI/ updates are just formatting issues, small ones
to bring the files into parsable format, and have been acked by
numerous subsystem maintainers and the documentation maintainer. I
figured it was good to get this into 5.10-rc2 to help wih the merge
issues that would arise if these were to stick in linux-next until
5.11-rc1.

The debugfs change has been in linux-next for a long time, and the
Documentation updates only for the last linux-next release"

* tag 'driver-core-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (40 commits)
scripts: get_abi.pl: assume ReST format by default
docs: ABI: sysfs-class-led-trigger-pattern: remove hw_pattern duplication
docs: ABI: sysfs-class-backlight: unify ABI documentation
docs: ABI: sysfs-c2port: remove a duplicated entry
docs: ABI: sysfs-class-power: unify duplicated properties
docs: ABI: unify /sys/class/leds/<led>/brightness documentation
docs: ABI: stable: remove a duplicated documentation
docs: ABI: change read/write attributes
docs: ABI: cleanup several ABI documents
docs: ABI: sysfs-bus-nvdimm: use the right format for ABI
docs: ABI: vdso: use the right format for ABI
docs: ABI: fix syntax to be parsed using ReST notation
docs: ABI: convert testing/configfs-acpi to ReST
docs: Kconfig/Makefile: add a check for broken ABI files
docs: abi-testing.rst: enable --rst-sources when building docs
docs: ABI: don't escape ReST-incompatible chars from obsolete and removed
docs: ABI: create a 2-depth index for ABI
docs: ABI: make it parse ABI/stable as ReST-compatible files
docs: ABI: sysfs-uevent: make it compatible with ReST output
docs: ABI: testing: make the files compatible with ReST output
...

show more ...

docs: ABI: fix syntax to be parsed using ReST notation

There are a number of new changes at the ABI files that cause
them to produce warnings when generating ABI output.

Fix them.

Acked-by: Jonath

docs: ABI: fix syntax to be parsed using ReST notation

There are a number of new changes at the ABI files that cause
them to produce warnings when generating ABI output.

Fix them.

Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/55a89f423cf122982c462d257722e44d6ece4b36.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

show more ...

Merge branch 'master' into for-next

Sync with Linus' branch in order to be able to apply fixups
of more recent patches.

Merge branch 'for-next' into for-linus

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the G

Merge tag 'irqchip-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent

Pull irqchip fixes from Marc Zyngier:

- Fix atomicity of affinity update in the GIC driver
- Don't sleep in atomic when waiting for a GICv4.1 RD to respond
- Fix a couple of typos in user-visible messages

show more ...

Merge tag 'v5.8-rc3' into arm/qcom

Linux 5.8-rc3

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.la

Backmerge remote-tracking branch 'drm/drm-next' into drm-misc-next

Some conflicts with ttm_bo->offset removal, but drm-misc-next needs updating to v5.8.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@inte

Merge drm/drm-next into drm-intel-next-queued

Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking
API: convert mmap_sem comments").

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge tag 'v5.8-rc1' into regulator-5.8

Linux 5.8-rc1

Merge tag 'v5.8-rc1' into fixes

Linux 5.8-rc1

Merge v5.8-rc1 into drm-misc-fixes

Beginning a new release cycles for what will become v5.8. Updating
drm-misc-fixes accordingly.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'dt/schema-cleanups' into dt/linus