wpa: Import 2.11

Following is a changelog of new features and fixes to wpa:

hostapd:
* Wi-Fi Easy Connect
- add support for DPP release 3
- allow Configurator parameters to be provided during c

wpa: Import 2.11

Following is a changelog of new features and fixes to wpa:

hostapd:
* Wi-Fi Easy Connect
- add support for DPP release 3
- allow Configurator parameters to be provided during config exchange
* HE/IEEE 802.11ax/Wi-Fi 6
- various fixes
* EHT/IEEE 802.11be/Wi-Fi 7
- add preliminary support
* SAE: add support for fetching the password from a RADIUS server
* support OpenSSL 3.0 API changes
* support background radar detection and CAC with some additional
drivers
* support RADIUS ACL/PSK check during 4-way handshake (wpa_psk_radius=3)
* EAP-SIM/AKA: support IMSI privacy
* improve 4-way handshake operations
- use Secure=1 in message 3 during PTK rekeying
* OCV: do not check Frequency Segment 1 Channel Number for 160 MHz cases
to avoid interoperability issues
* support new SAE AKM suites with variable length keys
* support new AKM for 802.1X/EAP with SHA384
* extend PASN support for secure ranging
* FT: Use SHA256 to derive PMKID for AKM 00-0F-AC:3 (FT-EAP)
- this is based on additional details being added in the IEEE 802.11
standard
- the new implementation is not backwards compatible
* improved ACS to cover additional channel types/bandwidths
* extended Multiple BSSID support
* fix beacon protection with FT protocol (incorrect BIGTK was provided)
* support unsynchronized service discovery (USD)
* add preliminary support for RADIUS/TLS
* add support for explicit SSID protection in 4-way handshake
(a mitigation for CVE-2023-52424; disabled by default for now, can be
enabled with ssid_protection=1)
* fix SAE H2E rejected groups validation to avoid downgrade attacks
* use stricter validation for some RADIUS messages
* a large number of other fixes, cleanup, and extensions

wpa_supplicant:
* Wi-Fi Easy Connect
- add support for DPP release 3
- allow Configurator parameters to be provided during config exchange
* MACsec
- add support for GCM-AES-256 cipher suite
- remove incorrect EAP Session-Id length constraint
- add hardware offload support for additional drivers
* HE/IEEE 802.11ax/Wi-Fi 6
- support BSS color updates
- various fixes
* EHT/IEEE 802.11be/Wi-Fi 7
- add preliminary support
* support OpenSSL 3.0 API changes
* improve EAP-TLS support for TLSv1.3
* EAP-SIM/AKA: support IMSI privacy
* improve mitigation against DoS attacks when PMF is used
* improve 4-way handshake operations
- discard unencrypted EAPOL frames in additional cases
- use Secure=1 in message 2 during PTK rekeying
* OCV: do not check Frequency Segment 1 Channel Number for 160 MHz cases
to avoid interoperability issues
* support new SAE AKM suites with variable length keys
* support new AKM for 802.1X/EAP with SHA384
* improve cross-AKM roaming with driver-based SME/BSS selection
* PASN
- extend support for secure ranging
- allow PASN implementation to be used with external programs for
Wi-Fi Aware
* FT: Use SHA256 to derive PMKID for AKM 00-0F-AC:3 (FT-EAP)
- this is based on additional details being added in the IEEE 802.11
standard
- the new implementation is not backwards compatible, but PMKSA
caching with FT-EAP was, and still is, disabled by default
* support a pregenerated MAC (mac_addr=3) as an alternative mechanism
for using per-network random MAC addresses
* EAP-PEAP: require Phase 2 authentication by default (phase2_auth=1)
to improve security for still unfortunately common invalid
configurations that do not set ca_cert
* extend SCS support for QoS Characteristics
* extend MSCS support
* support unsynchronized service discovery (USD)
* add support for explicit SSID protection in 4-way handshake
(a mitigation for CVE-2023-52424; disabled by default for now, can be
enabled with ssid_protection=1)
- in addition, verify SSID after key setup when beacon protection is
used
* fix SAE H2E rejected groups validation to avoid downgrade attacks
* a large number of other fixes, cleanup, and extensions

MFC after: 2 months

Merge commit '6377230b3cf4f238dcd0dc2d76ff25943d3040e5'

show more ...

wpa: Restructure wpa build

The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace wil

wpa: Restructure wpa build

The current WPA build assumes a flat namespace. However the latest sources
from w1.fi now have a duplicate config.c, in two separate subdirectories.
The flat namespace will overwrite config.o with the output from the most
recently modified config.c, of which there are two of them.

This commit resolves this problem by building each component in
wpa's src subdirectory tree into its own .a archive, just as the w1.fi
upstream build as used by the port does. The advantages of this approach
are:

1. Duplicate source file names, i.e. config.c in the wpa_supplicant
direcory and another config.c in src/utils in the next wpa
will result in both compiles writing to the same .o file.

2. This restructure simplifies maintanence. A develper needs only to add
new files as identified by git status in the vendor branch to the
appropriate Makefile within the usr.sbin/wpa tree. This also reduces
time required to prepare a new import and should reduce error.

3. The new wpa build structure more closely represents the build as
performed by the upstream tarball.

This is in preparation for the next wpa update from w1.fi.

Reviewed by: philip
Tested by: philip
MFC after: 2 months
Differential Revision: https://reviews.freebsd.org/D30372

show more ...