Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Implement dump_stats command for usbconfig(8).

This command is useful when debugging USB device issues.

MFC after: 1 week
Sponsored by: Mellanox Technologies

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

IFH@204581

MFC r201705

Sync to p4
- Add new quirks commands and the '-d' option optionally to specify the ugen device.

Sync to p4
- Add new quirks commands and the '-d' option optionally to specify the ugen device.

Submitted by: Hans Petter Selasky

Merge from head

Merge from head up to r188941 (last revision before the USB stack switch)

Update the projects tree to a newer FreeBSD current.

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/us

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.

Submitted by: rink (earlier version)

show more ...

MFp4 //depot/projects/usb@157699

Add two new functions to the libusb20 API and required kernel ioctls.

- libusb20_dev_get_iface_desc
- libusb20_dev_get_info

New command to usbconfig, "show_ifdrv",

MFp4 //depot/projects/usb@157699

Add two new functions to the libusb20 API and required kernel ioctls.

- libusb20_dev_get_iface_desc
- libusb20_dev_get_info

New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.

See "man libusb20" for a detailed description.

Some minor style corrections long-line wrapping.

Submitted by: Hans Petter Selasky

show more ...

integrate from head@185615

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred

show more ...

Sync to p4
- Add new quirks commands and the '-d' option optionally to specify the ugen device.

Submitted by: Hans Petter Selasky

Update the projects tree to a newer FreeBSD current.

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/us

Change USB over to make_dev() for all device nodes, previously it hooked into
the devfs clone handler to open the (invisible) devices on the fly.

The /dev entries are layed out as follows,

/dev/usbctl = master device
/dev/usb/0.1.0.5 = usb device, (<bus>.<dev>.<iface>.<endpoint>)
/dev/ugen0.1 -> usb/0.1.0.0 = ugen link to ctrl endpoint

This also removes the custom permissions model from USB. Bump
__FreeBSD_version to 800066.

Submitted by: rink (earlier version)

show more ...

MFp4 //depot/projects/usb@157699

Add two new functions to the libusb20 API and required kernel ioctls.

- libusb20_dev_get_iface_desc
- libusb20_dev_get_info

New command to usbconfig, "show_ifdrv",

MFp4 //depot/projects/usb@157699

Add two new functions to the libusb20 API and required kernel ioctls.

- libusb20_dev_get_iface_desc
- libusb20_dev_get_info

New command to usbconfig, "show_ifdrv", which will print out the kernel driver
attached to the given USB device aswell.

See "man libusb20" for a detailed description.

Some minor style corrections long-line wrapping.

Submitted by: Hans Petter Selasky

show more ...

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including

Bring in USB4BSD, Hans Petter Selasky rework of the USB stack
that includes significant features and SMP safety.

This commit includes a more or less complete rewrite of the *BSD USB
stack, including Host Controller and Device Controller drivers and
updating all existing USB drivers to use the new USB API:

1) A brief feature list:

- A new and mutex enabled USB API.

- Many USB drivers are now running Giant free.

- Linux USB kernel compatibility layer.

- New UGEN backend and libusb library, finally solves the "driver
unloading" problem. The new BSD licensed libusb20 library is fully
compatible with libusb-0.1.12 from sourceforge.

- New "usbconfig" utility, for easy configuration of USB.

- Full support for Split transactions, which means you can use your
full speed USB audio device on a high speed USB HUB.

- Full support for HS ISOC transactions, which makes writing drivers
for various HS webcams possible, for example.

- Full support for USB on embedded platforms, mostly cache flushing
and buffer invalidating stuff.

- Safer parsing of USB descriptors.

- Autodetect of annoying USB install disks.

- Support for USB device side mode, also called USB gadget mode,
using the same API like the USB host side. In other words the new
USB stack is symmetric with regard to host and device side.

- Support for USB transfers like I/O vectors, means more throughput
and less interrupts.

- ... see the FreeBSD quarterly status reports under "USB project"

2) To enable the driver in the default kernel build:

2.a) Remove all existing USB device options from your kernel config
file.

2.b) Add the following USB device options to your kernel configuration
file:

# USB core support
device usb2_core

# USB controller support
device usb2_controller
device usb2_controller_ehci
device usb2_controller_ohci
device usb2_controller_uhci

# USB mass storage support
device usb2_storage
device usb2_storage_mass

# USB ethernet support, requires miibus
device usb2_ethernet
device usb2_ethernet_aue
device usb2_ethernet_axe
device usb2_ethernet_cdce
device usb2_ethernet_cue
device usb2_ethernet_kue
device usb2_ethernet_rue
device usb2_ethernet_dav

# USB wireless LAN support
device usb2_wlan
device usb2_wlan_rum
device usb2_wlan_ral
device usb2_wlan_zyd

# USB serial device support
device usb2_serial
device usb2_serial_ark
device usb2_serial_bsa
device usb2_serial_bser
device usb2_serial_chcom
device usb2_serial_cycom
device usb2_serial_foma
device usb2_serial_ftdi
device usb2_serial_gensa
device usb2_serial_ipaq
device usb2_serial_lpt
device usb2_serial_mct
device usb2_serial_modem
device usb2_serial_moscom
device usb2_serial_plcom
device usb2_serial_visor
device usb2_serial_vscom

# USB bluetooth support
device usb2_bluetooth
device usb2_bluetooth_ng

# USB input device support
device usb2_input
device usb2_input_hid
device usb2_input_kbd
device usb2_input_ms

# USB sound and MIDI device support
device usb2_sound

2) To enable the driver at runtime:

2.a) Unload all existing USB modules. If USB is compiled into the
kernel then you might have to build a new kernel.

2.b) Load the "usb2_xxx.ko" modules under /boot/kernel having the same
base name like the kernel device option.

Submitted by: Hans Petter Selasky hselasky at c2i dot net
Reviewed by: imp, alfred

show more ...