pstat: Use nitems(foo) instead of sizeof(foo)/sizeof(foo[0])

Pull Request: https://github.com/freebsd/freebsd-src/pull/888
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>

Remove copyright strings ifdef'd out

We've ifdef'd out the copyright strings for some time now. Go ahead and
remove the ifdefs. Plus whatever other detritis was left over from other
recent removals.

Remove copyright strings ifdef'd out

We've ifdef'd out the copyright strings for some time now. Go ahead and
remove the ifdefs. Plus whatever other detritis was left over from other
recent removals. These copyright strings are present in the comments and
are largely from CSRG's attempt at adding their copyright to every
binary file (which modern interpretations of the license doesn't
require).

Sponsored by: Netflix

show more ...

usr.sbin: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a p

usr.sbin: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by: Netflix

show more ...

Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

pstat(8): improve the Size header width after r358181

All size values use fields of width 8. Also, all other headers use fields of
width 8. Make the Size header added in r358181 use 8 characters as

pstat(8): improve the Size header width after r358181

All size values use fields of width 8. Also, all other headers use fields of
width 8. Make the Size header added in r358181 use 8 characters as well.

show more ...

Merge r358179 through r358238.

PR: 244251

- Implement -h (human readable) for the size of the underlying block disk.
Currently, the size of the swap device is unconditionally reported using
blocks, even if -h has been used.
- While here,

- Implement -h (human readable) for the size of the underlying block disk.
Currently, the size of the swap device is unconditionally reported using
blocks, even if -h has been used.
- While here, switch to CONVERT_BLOCKS() instead of CONVERT() which will
avoid overflowing size counters (in human readable form see: r196244)
- Update the column headers to reflect that a size is being reported instead
of the block size units being used

Before:

$ swapinfo
Device 1K-blocks Used Avail Capacity
/dev/gpt/swapfs 1048576 0 1048576 0%
$

After:

$ swapinfo -h
Device Size Used Avail Capacity
/dev/gpt/swapfs 1.0G 0B 1.0G 0%
$

Differential Revision: https://reviews.freebsd.org/D23758
Reviewed by: kevans
MFC after: 3 weeks

show more ...

Merge ^/head r325999 through r326131.

General further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier f

General further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

show more ...

Merge ^/head r318658 through r318963.

Commit the 64-bit inode project.

Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_na

Commit the 64-bit inode project.

Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.

ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.

Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.

Struct xvnode changed layout, no compat shims are provided.

For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.

Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.

Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).

Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439

show more ...

Merge ^/head r314420 through r314481.

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

show more ...

- pstat(8) does not accept any arguments other than getopt() args,
so don't bother to adjust argc/argv after getopt() loop.
- Make a string pointer constant.

MFC after: 2 weeks

IFC @ r226824

MFC

Get rid of major/minor number distinction.

As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat

Get rid of major/minor number distinction.

As of FreeBSD 6, devices can only be opened through devfs. These device
nodes don't have major and minor numbers anymore. The st_rdev field in
struct stat is simply based a copy of st_ino.

Simply display device numbers as hexadecimal, using "%#jx". This is
allowed by POSIX, since it explicitly states things like the following
(example taken from ls(1)):

"If the file is a character special or block special file, the
size of the file may be replaced with implementation-defined
information associated with the device in question."

This makes the output of these commands more compact. For example, ls(1)
now uses approximately four columns less. While there, simplify the
column length calculation from ls(1) by calling snprintf() with a NULL
buffer.

Don't be afraid; if needed one can still obtain individual major/minor
numbers using stat(1).

show more ...

Merge from head

Merge from head up to r188941 (last revision before the USB stack switch)

- MFC from head@196987

- Merge r196244:
Avoid overflowing the swap size counters in human-readable mode
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks.

- Merge r196244:
Avoid overflowing the swap size counters in human-readable mode
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks. With this macro
it is not longer needed to perform needless multiplica

Approved by: re (kib)

show more ...

- Avoid overflowing the swap size counters in human-readable mode
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks. With this macro
it

- Avoid overflowing the swap size counters in human-readable mode
by introducing the new CONVERT_BLOCKS macro which operates on
sizes already converted to number of blocks. With this macro
it is not longer needed to perform needless multiplication by
blocksize just to divide on it later in CONVERT macro.

Approved by: re (kib)
MFC after: 1 week

show more ...

- Merge from HEAD

- Make pstat(8) WARNS=6 safe.
- While here, eliminate the check for len > 0 in ttymode_sysctl
as the code is able to handle this case well.

Reviewed by: ed (initial version)

Correct my previous commit to pstat(8).

Not only mark the strings inside the array as const, but do the same for
the elements of the array itself.

Submitted by: Christoph Mallon