Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Remove whitespace at the end of lines.

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SES

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.

When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).

This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.

Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>

show more ...

socket()s first argument should be a protocol family rather than an
address family.

o Enable IFF_MULTICAST when first opening the tun device (and keep the flag
when we ioctl(TUNSIFINFO) under OpenBSD)
o Don't bring the interface up immediately
o Don't complain about unrecognised i

o Enable IFF_MULTICAST when first opening the tun device (and keep the flag
when we ioctl(TUNSIFINFO) under OpenBSD)
o Don't bring the interface up immediately
o Don't complain about unrecognised interface flags in ``show iface''.

show more ...

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and to filter IPV6 traffic whether encapsulated or
not.

IPV6CP support is crude for now, and hasn't been tested against
any other implementations.

RADIUS and IPv6 are independent of eachother for now.

ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
few.

o Allow a mask specification for the ``delete'' command. It's now
possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
interface addresses rather than doing it just for the ``current''
peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
When display traffic, display at least some information about unrecognised
traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>

show more ...

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the pp

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the ppp version number.

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

show more ...

TUNSIFINFO now requires uid 0 to change the interface MTU.

Reviewed by: Mark Knight <markk@knigma.org>

Add ``enable/disable tcpmssfixup'', defaulting to enabled.

Suggested by: julian
Hijacked from: ru (ports/net/tcpmssd)

Back out the bogus #ifdef __NetBSD__ #include <signal.h> lines.
The original report was due to a mis-installation of the NetBS
header files :-/

Submitted by: Kazuyoshi Kato <kazk@yyy.or.jp>

NetBSD has moved ``extern int errno;'' to signal.h :-/

Submitted by: Kazuyoshi Kato <kazk@yyy.or.jp>

NetBSD requires net/if.h for the IFF_* defines (as well as OpenBSD) !

$Id$ -> $FreeBSD$

Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.

Ppp controls the phone number, but idle timers and
S

Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.

Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).

This involves a new datalink state machine phase. The
``wait for carrier'' phase happens after dialing but
before logging in. The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.

The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).

For i4b devices we always insist on carrier.

Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]

show more ...

o Obsolete the undocumented ``set weight'' command.
o If we're using RADIUS and the RADIUS mtu is less than our
peers mru/mrru, reduce our mtu to this value for NetBSD too.
o Make struct throughput

o Obsolete the undocumented ``set weight'' command.
o If we're using RADIUS and the RADIUS mtu is less than our
peers mru/mrru, reduce our mtu to this value for NetBSD too.
o Make struct throughput's sample period dynamic and tweak the ppp
version number to reflect the extra stuff being passed through
the local domain socket as a result (MP mode).
o Measure the current throughput based on the number of samples actually
taken rather than on the full sample period.
o Keep the throughput statisics persistent while being passed to
another ppp invocation through the local domain socket.
o When showing throughput statistics after the timer has stopped, use
the stopped time for overall calculations, not the current time.
Also show the stopped time and how long the current throughput has
been sampled for.
o Use time() consistently in throughput.c
o Tighten up the ``show bundle'' output.
o Introduce the ``set bandwidth'' command.
o Rewrite the ``set autoload'' command. It now takes three arguments
and works based on a rolling bundle throughput average compared against
the theoretical bundle bandwidth over a given period (read: it's now
functional).

show more ...

o Redesign the layering mechanism and make the aliasing code part of
the layering.

We now ``stack'' layers as soon as we open the device (when we figure
out what we're dealing with). A static

o Redesign the layering mechanism and make the aliasing code part of
the layering.

We now ``stack'' layers as soon as we open the device (when we figure
out what we're dealing with). A static set of `dispatch' routines are
also declared for dealing with incoming packets after they've been
`pulled' up through the stacked layers.

Physical devices are now assigned handlers based on the device type
when they're opened. For the moment there are three device types;
ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
``show mem''.
o ``show modem'' becomes ``show physical''.

show more ...

Add support for NetBSD

#include <errno.h>, not <sys/errno.h>

Initial RADIUS support (using libradius). See the man page for
details. Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_reques

Initial RADIUS support (using libradius). See the man page for
details. Compiling with -DNORADIUS (the default for `release')
removes support.

TODO: The functionality in libradius::rad_send_request() needs
to be supplied as a set of routines so that ppp doesn't
have to wait indefinitely for the radius server(s). Instead,
we need to get a descriptor back, select() on the descriptor,
and ask libradius to service it when necessary.
For now, ppp blocks SIGALRM while in rad_send_request(), so
it misses PAP/CHAP retries & timeouts if they occur.

Only PAP is functional. When CHAP is attempted, libradius
complains that no User-Password has been specified... rfc2138
says that it *mustn't* be used for CHAP :-(

Sponsored by: Internet Business Solutions Ltd., Switzerland

show more ...

Solve the ``first connection'' problem that occurs on
demand-dial links with dynamic IP numbers where the program
that causes the dial bind()s to an interface address that is
subsequently changed aft

Solve the ``first connection'' problem that occurs on
demand-dial links with dynamic IP numbers where the program
that causes the dial bind()s to an interface address that is
subsequently changed after ppp negotiation.

The problem is defeated by adding negotiated addresses to the
tun interface as additional alias addresses and providing a set
of ``iface'' commands for managing the interface. Libalias is
also required (and what a name clash!) - it happily IP-aliases
the address so that the source is that of the primary (negotiated)
interface and un-IP-aliases it on the way back.

An ``enable iface-alias'' is done implicitly by the -alias command
line switch. If -alias isn't given, iface-aliasing is disabled by
default and can't be enabled 'till an ``alias enable yes'' is done.
``alias enable no'' silently disables iface-alias.

So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah''
will work for the first connection, although existing bindings will
not survive a disconnect/connect as the TCP peer will be trying to
send to the old IP address - the packets won't route.

It's now a lot easier to add IPXCP to ppp with minor updates to
the new iface.[ch] (if anyone ever gets 'round to it).

It's also now possible to manually add interface aliases with
something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows
multi-homed ppp links :-)

show more ...

Use IFT_PPP from net/if_types.h rather than hard-coding it.

Remove redundant includes

MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.