Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Add "iface name" and "iface description" commands.

PR: 151400
Submitted by: Aragon Gouveia - aragon at phat dot za dot net with minor fixes
MFC after: 3 weeks

Support a ``set rad_alive N'' command to enable periodic RADIUS accounting
information being sent to the RADIUS server.

Logging of RADIUS accounting information moves to a ``set log [+-]radius''
lev

Support a ``set rad_alive N'' command to enable periodic RADIUS accounting
information being sent to the RADIUS server.

Logging of RADIUS accounting information moves to a ``set log [+-]radius''
level, along with the RADIUS alive info, and the version number is bumped
to 3.2 to reflect this.

Mostly submitted by: alx@sm.ukrtel.net (back in January)
MFC after: 3 weeks

show more ...

Remove whitespace at the end of lines.

Remove a bogus log_Id() decl

Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

MYADDR:
log Session closing: User USER, address HISADDR, up UPTIME

Fixed some memory leakage with commands that expand words.
Made some functions static.
Fixed a diagnostic bug (iface add .... SIOCDIFADDR)

show more ...

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and to filter IPV6 traffic whether encapsulated or
not.

IPV6CP support is crude for now, and hasn't been tested against
any other implementations.

RADIUS and IPv6 are independent of eachother for now.

ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
few.

o Allow a mask specification for the ``delete'' command. It's now
possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
interface addresses rather than doing it just for the ``current''
peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
When display traffic, display at least some information about unrecognised
traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>

show more ...

Correct LogMAX

Broken by: me
Submitted by: Mark Hannon <markhannon@one.net.au>

Add LogFILTER logging to log packets allowed by the dial filter and
dropped by any filter.

Submitted by: Mark Hannon <markhannon@one.net.au>

with some small tweaks by me.

Add ``set log dns'' to log DNS QUERY packets.

This is invaluable for dial-on-demand connections...
In ppp.linkup:

set log -dns -tcp/ip

and in ppp.linkdown

set log +dns +tcp/ip

giving a much

Add ``set log dns'' to log DNS QUERY packets.

This is invaluable for dial-on-demand connections...
In ppp.linkup:

set log -dns -tcp/ip

and in ppp.linkdown

set log +dns +tcp/ip

giving a much better account of why the link came up.

show more ...

When logging warning messages, there are now three scenarios:
o If a prompt is executing the command, only display the warning to
that prompt
o If a prompt is executing a ``load'' command, display

When logging warning messages, there are now three scenarios:
o If a prompt is executing the command, only display the warning to
that prompt
o If a prompt is executing a ``load'' command, display the warning
to all prompts *and* syslog
o Otherwise, display the warning to all prompts *and* syslog.

show more ...

$Id$ -> $FreeBSD$

Allow ``host:port/udp'' devices and support ``host:port/tcp'' as
being the same as the previous (still supported) ``host:port''
syntax for tcp socket devices.

A udp device uses synchronous ppp rathe

Allow ``host:port/udp'' devices and support ``host:port/tcp'' as
being the same as the previous (still supported) ``host:port''
syntax for tcp socket devices.

A udp device uses synchronous ppp rather than async, and avoids
the double-retransmit overhead that comes with ppp over tcp (it's
usually a bad idea to transport IP over a reliable transport that
itself is using an unreliable transport). PPP over UDP provides
througput of ** 1.5Mb per second ** with all compression disabled,
maxing out a PPro/200 when running ppp twice, back-to-back.

This proves that PPPoE is plausable in userland....

This change adds a few more handler functions to struct device and
allows derivations of struct device (which may contain their own
data etc) to pass themselves through the unix domain socket for MP.
** At last **, struct physical has lost all the tty crud !

iov2physical() is now smart enough to restore the correct stack of
layers so that MP servers will work again.

The version number has bumped as our MP link transfer contents have
changed (they now may contain a `struct device').

Don't extract the protocol twice in MP mode (resulting in protocol
rejects for every MP packet). This was broken with my original
layering changes.

Add ``Physical'' and ``Sync'' log levels for logging the relevent
raw packets and add protocol-tracking LogDEBUG stuff in various
LayerPush & LayerPull functions.

Assign our physical device name for incoming tcp connections by
calling getpeername().

Assign our physical device name for incoming udp connections from
the address retrieved by the first recvfrom().

show more ...

When entering ``term'' mode, don't output any messages until
the device is successfully opened. If we fail to open it,
mention the fact.
Also go back into command mode as soon as the device is close

When entering ``term'' mode, don't output any messages until
the device is successfully opened. If we fail to open it,
mention the fact.
Also go back into command mode as soon as the device is closed
rather than waiting for the user to type something before noticing.

show more ...

o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set l

o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
allow a fifth field for specifying auth/cbcp dialback
parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.

show more ...

PR: 7469
Be careful that the current or next prompt in the list
that we're iterating through doesn't get changed by
descriptor_Read().

o Move our prompt descriptor list outside of the bundle.
It's now dealt with by the `server' object. This simplifies
things as we only have one list of prompt descriptors and
the log_ routines

o Move our prompt descriptor list outside of the bundle.
It's now dealt with by the `server' object. This simplifies
things as we only have one list of prompt descriptors and
the log_ routines check prompt::logactive to determine
whether it should be used for output.
o Include the MP socket UpdateSet() result in bundle::UpdateSet().
o Don't select on the tun device unless we're in NETWORK
phase or AUTO mode.
o Stop the idle timer when we go to DEAD phase. We may
have transferred a link and not had a chance to kill
it.
o Don't fail when trying to unlink our transferred datalink
from our descriptor lists just before the transfer.
o Add our link descriptor to the write set if we got a short
write the last time (physical::out is set).
o Log the connection source address when a connection is closed.
o Remove descriptor::next field. Descriptor lists are not required
any more.

show more ...

MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.

o Mention the ``timer'' log in the man page.
o Remove an escaped mention of ``carrier'' logging.
o Alphabeticalise timer logging in the log list.

Cosmetic: Make our external function names consistent.

o Create a new ``timer'' log level. This lets us ``set
log debug'' without filling our filesystem/screen with
junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can h

o Create a new ``timer'' log level. This lets us ``set
log debug'' without filling our filesystem/screen with
junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions. If
LayerUp() fails, the FSM does an immediate FsmDown() without
calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
chat programs so that our documented ability to communicate with
/dev/tty via that descriptor works. Also document it as
descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
This allows `struct datalink's to flatten themselves, pass
through a pipe (read: the eye of a needle !) and come alive
at the other end. The donator then fork()s & exec()s pppmpipe,
``passing'' the connection to another ppp instance.

*** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still. It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....

show more ...

o Remove LINK level logging.
o change the default link name to ``deflink'' rather
than ``default''.
o Prepend the link name to CCP and LCP FSM diagnostics.
o Protect against 0 length options in CCP

o Remove LINK level logging.
o change the default link name to ``deflink'' rather
than ``default''.
o Prepend the link name to CCP and LCP FSM diagnostics.
o Protect against 0 length options in CCP and IPCP REQ
interpreters (already done for LCP).
o Allow optional context for the `show' command.
o Use MPs link when interpreting commands if the multilink
mrru is configured rather than when multilink is active.
This means that once we've ``set mrru xxx'', we then need
to ``link deflink show ccp'' etc if we want to do link-level
stuff (based on the command requiring optional or manditory
context).
o Use the ifconfig'd interface address in `set enddisc {ip,mac}'
if it's there, otherwise the configuration file value.

show more ...

o Use __attribute__ (#ifdef __GNUC__) to type-check
LogPrintf() and prompt_Printf(), and fix the bits
identified as being wrong as a result.