Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lq

Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.

PR: 74821

show more ...

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Hug

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd

show more ...

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES''

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.

show more ...

When the peer fails to specify an MRU and a 1500 byte MRU is not
allowed either because of the transport or configuration, send a
MRU NAK only once, then allow the negotiations to proceed.

rfc1661 s

When the peer fails to specify an MRU and a 1500 byte MRU is not
allowed either because of the transport or configuration, send a
MRU NAK only once, then allow the negotiations to proceed.

rfc1661 says that 1500 should always be allowed and rfc2516 says
that 1492 is the maximum for PPPoE. This changes ppp so that it
only weakly suggests 1492, then goes with the default (leaving
the problem in the hands of the peer WRT how they set their MTU).

MFC after: 1 week

show more ...

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the pp

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the ppp version number.

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

show more ...

Convert IIJ copyrights to BSD copyrights.

Approved by: Toshiharu OHNO <tohno@sirius.ocn.ne.jp>

Add MPPE and MSChap v2 support (denied and disabled by default)

Submitted by: Ustimenko Semen <semen@iclub.nsu.ru>

Support link identification from rfc1570
Two new commands are available; ``ident'' and ``sendident''.

$Id$ -> $FreeBSD$

o Redesign the layering mechanism and make the aliasing code part of
the layering.

We now ``stack'' layers as soon as we open the device (when we figure
out what we're dealing with). A static

o Redesign the layering mechanism and make the aliasing code part of
the layering.

We now ``stack'' layers as soon as we open the device (when we figure
out what we're dealing with). A static set of `dispatch' routines are
also declared for dealing with incoming packets after they've been
`pulled' up through the stacked layers.

Physical devices are now assigned handlers based on the device type
when they're opened. For the moment there are three device types;
ttys, execs and tcps.

o Increment version number to 2.2
o Make an entry in [uw]tmp for non-tty -direct invocations (after
pap/chap authentication).
o Make throughput counters quad_t's
o Account for the absolute number of mbuf malloc()s and free()s in
``show mem''.
o ``show modem'' becomes ``show physical''.

show more ...

Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``s

Allow control over the number of ConfigREQ & TermREQ attempts
that are made in each of the FSMs (LCP, CCP & IPCP) and the
number of REQs/Challenges for PAP/CHAP by accepting more arguments
in the ``set {c,ip,l}cpretry'' and ``set {ch,p}apretry'' commands.

Change the non-convergence thresholds to 3 times the number of configured
REQ tries (rather than the previous fixed ``10''). We now notice
repeated NAKs and REJs rather than just REQs.

Don't suggest that CHAP 0x05 isn't supported when it's not configured.

Fix some bugs that expose themselves with smaller numbers of retries:
o Handle instantaneous disconnects (set device /dev/null) correctly
by stopping all fsm timers in fsm2initial.
o Don't forget to uu_unlock() devices that are files but are not
ttys (set device /dev/zero).

Fix a *HORRENDOUS* bug in RFC1661 (already fixed for an Open event in state
``Closed''):
According to the state transition table, a RCR+ or RCR- received in
the ``Stopped'' state are supposed to InitRestartCounter, SendConfigReq
and SendConfig{Ack,Nak}. However, in ``Stopped'', we haven't yet
done a TLS (or the last thing we did is a TLF). We must therefore
do the TLS at this point !

This was never noticed before because LCP and CCP used not use
LayerStart() for anything interesting, and IPCP tends to go into
Stopped then get a Down because of an LCP RTR rather than getting a
RCR again.

show more ...

Fully support both NT and LANMan CHAP type 0x80 as both
authenticator and authenticatee.

o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set l

o Support callback types NONE, E.164, AUTH and CBCP.
(see the new ``set callback'' and ``set cbcp'' commands)
o Add a ``cbcp'' log level and mbuf type.
o Don't dump core when \T is given in ``set login'' or
``set hangup''.
o Allow ``*'' and blanks as placeholders in ppp.secret and
allow a fifth field for specifying auth/cbcp dialback
parameters.
o Remove a few extraneous #includes
o Define the default number of REQs (restart counter) in defs.h
rather than hardcoding ``5'' all over the place.
o Fix a few man page inconsistencies.

show more ...

o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,

o Fix remaining sizeof problems for 64 bit machines.
o Allow ``set ....'' when we have multiple links but aren't in
multilink mode.
o Do a TLS when we receive a ``Open'' event in ``Closed'' state,
despite the rfc state transition table. This is clearly an
error in the RFC as TLS cannot have yet been called (without
TLF) in the ``Closed'' state.
I've posted a message to comp.protocols.ppp for confirmation.

show more ...

MFMP: Make ppp multilink capable.
See the file README.changes, and re-read the man page.

Cosmetic: Make our external function names consistent.

o Create a new ``timer'' log level. This lets us ``set
log debug'' without filling our filesystem/screen with
junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can h

o Create a new ``timer'' log level. This lets us ``set
log debug'' without filling our filesystem/screen with
junk that we don't really want to see.
o change PHYS_STDIN to PHYS_DIRECT - we can handle incoming
connections that aren't on STDIN_FILENO now.
o Allow return values from our FSM LayerUp functions. If
LayerUp() fails, the FSM does an immediate FsmDown() without
calling the fsm_parent's Layer{Up,Down} functions.
o Clear the close-on-exec flag of file descriptor 3 when executing
chat programs so that our documented ability to communicate with
/dev/tty via that descriptor works. Also document it as
descriptor 3, not 4 :-O
o Allow a ``rm'' command as an alias for ``remove''.
o Fix the bind()/connect()/accept() calls made by the MP server.
o Create bundle_SendDatalink() and bundle_ReceiveDatalink().
This allows `struct datalink's to flatten themselves, pass
through a pipe (read: the eye of a needle !) and come alive
at the other end. The donator then fork()s & exec()s pppmpipe,
``passing'' the connection to another ppp instance.

*** PPP NOW TALKS MULTILINK :-))) ***

Our link utilization is hideous, and lots of code needs
tidying still. It's also probably riddled with bugs !
It's been tested against itself only, and has hung once,
so confidence isn't high....

show more ...

Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply
multilink ('cos I've seen my ISP REQ it without multilink).

Setting MRRU is ifdef'd out until it's debugged and we can
merge -direct link

Negotiate MRRU, SHORTSEQ and ENDDISC. ENDDISC doesn't imply
multilink ('cos I've seen my ISP REQ it without multilink).

Setting MRRU is ifdef'd out until it's debugged and we can
merge -direct links with other running programs.

Fix MTU setting.

show more ...

o Move the accept/deny/disable/enable globals either to the
bundle (non-negotiated vars) or to their respective IPCP,
LCP or CCP.
o Enable rolling throughput statistics by default.
o Remove the `

o Move the accept/deny/disable/enable globals either to the
bundle (non-negotiated vars) or to their respective IPCP,
LCP or CCP.
o Enable rolling throughput statistics by default.
o Remove the `display' command. These values now appear in
`show bundle', `show ipcp', `show ccp' and `show lcp'.
o Initialise auth name & key at bundle create time (oops).
o Rename pppd-deflate (the id-24 hack) to deflate24.
o Don't send both a REJ and a NAK to an IPCP or LCP REQ.
Favour the REJ (already done at the CCP level).
o Recurse in datalink_UpdateSet() when we change state, otherwise
we end up setting no descriptors and getting jammed in the
imminent select() instead of doing the dial/login/hangup.
o Display our CHAP encryption method despite being built with DES.
o Display VJ as not negotiated in ``show ipcp'' when necessary.

show more ...

o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
o

o Move alias function pointers into loadalias.c
o Move Var*Version into command.c
o Remove struct pppVars (and there was much rejoicing) !
o Forward-decl some structs in .h files to avoid include
ordering requirements and remove a few more redundant
#includes.

show more ...

`int var : 1' -> `unsigned var : 1'.
This made things look silly and made us mis-negotiate the
number of VJ slots.

o Move default MRU, MTU, ACCMAP and OPENMODE config values into
struct lcp and display them in `show lcp'.
o Remove `show mru' and `show mtu' and make the data part of
`show lcp'. Also merge `se

o Move default MRU, MTU, ACCMAP and OPENMODE config values into
struct lcp and display them in `show lcp'.
o Remove `show mru' and `show mtu' and make the data part of
`show lcp'. Also merge `set m[tr]u' and `set openmode'
implementations into the SetVariable function.
o `set timeout' only accepts the idle timer value as an argument.
o Move our lqr period into struct lcp, and create a `set lqrperiod'
command. Display it in `show lcp'.
o Remove VarRetryTimeout, and implement it at the LCP, PAP, CHAP,
CCP and IPCP levels, creating individual `set XXXretry' commands
for each. They must be separate because they have different
context requirements in multilink mode.
o Display default config values in `show ccp'.
o Tart the man page up a bit (wrt PPP/TCP, compression and LQR) and
explain the new commands.

show more ...