|
Revision tags: release/14.0.0 |
|
| #
b3e76948 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
4d846d26 |
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
show more ...
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
1de7b4b8 |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
various: general adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
No functional change intended.
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0 |
|
| #
057f1760 |
| 05-Sep-2004 |
Brian Somers <brian@FreeBSD.org> |
Make ppp WARNS=5 clean
|
|
Revision tags: release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs, release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs, release/4.1.0, release/3.5.0_cvs, release/4.0.0_cvs, release/3.4.0_cvs |
|
| #
fdc29d54 |
| 26-Nov-1999 |
Brian Somers <brian@FreeBSD.org> |
Change ``set cd'' so that its default value is device specific. The
default is still 1 second for ttys, but is now 6 seconds for i4b (ISDN)
devices and 5 seconds for ethernet (PPPoE) devices.
|
| #
87c3786e |
| 06-Nov-1999 |
Brian Somers <brian@FreeBSD.org> |
Support PPPoE
Help (lots) from: julian, archie
Facilities from: ahebert@pubnix.net
|
|
Revision tags: release/3.3.0_cvs |
|
| #
97d92980 |
| 28-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|
| #
eb6e5e05 |
| 06-Aug-1999 |
Brian Somers <brian@FreeBSD.org> |
Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.
Ppp controls the phone number, but idle timers and
S
Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.
Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).
This involves a new datalink state machine phase. The
``wait for carrier'' phase happens after dialing but
before logging in. The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.
The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).
For i4b devices we always insist on carrier.
Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0 |
|
| #
057f1760 |
| 05-Sep-2004 |
Brian Somers <brian@FreeBSD.org> |
Make ppp WARNS=5 clean
|
|
Revision tags: release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs, release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs, release/4.1.0, release/3.5.0_cvs, release/4.0.0_cvs, release/3.4.0_cvs |
|
| #
fdc29d54 |
| 26-Nov-1999 |
Brian Somers <brian@FreeBSD.org> |
Change ``set cd'' so that its default value is device specific. The
default is still 1 second for ttys, but is now 6 seconds for i4b (ISDN)
devices and 5 seconds for ethernet (PPPoE) devices.
|
| #
87c3786e |
| 06-Nov-1999 |
Brian Somers <brian@FreeBSD.org> |
Support PPPoE
Help (lots) from: julian, archie
Facilities from: ahebert@pubnix.net
|
|
Revision tags: release/3.3.0_cvs |
|
| #
97d92980 |
| 28-Aug-1999 |
Peter Wemm <peter@FreeBSD.org> |
$Id$ -> $FreeBSD$
|
| #
eb6e5e05 |
| 06-Aug-1999 |
Brian Somers <brian@FreeBSD.org> |
Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.
Ppp controls the phone number, but idle timers and
S
Add ISDN support via isdnd & i4b. This requires version
0.81.1 of the i4b code - namely support of the I4B_VR_REQ
ioctl via the i4brbchX device.
Ppp controls the phone number, but idle timers and
SYNC/RAW decisions are still made by isdnd (in isdnd.rc).
This involves a new datalink state machine phase. The
``wait for carrier'' phase happens after dialing but
before logging in. The whole dial state should really
be abstracted so that each device type can deal with it
in its own way (thinking about PPPoE) - but that'll have
to wait.
The ``set cd'' symantics remain the same for tty devices,
but we now delay until we either get CD or timeout waiting
(at which time we drop the link if we require CD).
For i4b devices we always insist on carrier.
Thanks to hm@ for his help, and especially for pointing out
that I *don't* need to re-implement isdnd (that was a huge
waste of time !) :-]
show more ...
|