Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Send NAS-IP-Address as well as NAS-Identifier
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over th

Send NAS-IP-Address as well as NAS-Identifier
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over the 32 bit limit, so reoganise
things to allow a bunch more options.
Go to version 3.4.1 so that any compatability problems can be identified.

show more ...

Make ppp WARNS=5 clean

Do RADIUS accounting on IPV6CP.

MFC after: 1 week

Add a ``force-scripts'' option for using chat scripts with -direct and
-dedicated links.

Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>

Understand the Session-Timeout RADIUS attribute
Store the Filter-Id attribute (we don't do anything with it yet)

Submitted mostly by: andrew pavlov <and@kremenchug.net>

Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

Add a ``log'' command for logging specific information.
Add an ``UPTIME'' variable to indicate the bundle uptime.

It's now possible to put something like this in ppp.linkdown
for a server setup:

MYADDR:
log Session closing: User USER, address HISADDR, up UPTIME

Fixed some memory leakage with commands that expand words.
Made some functions static.
Fixed a diagnostic bug (iface add .... SIOCDIFADDR)

show more ...

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and

o Add ipv6 support, abstracting most NCP addresses into opaque
structures (well, they're treated as opaque).

It's now possible to manage IPv6 interface addresses and routing
table entries and to filter IPV6 traffic whether encapsulated or
not.

IPV6CP support is crude for now, and hasn't been tested against
any other implementations.

RADIUS and IPv6 are independent of eachother for now.

ppp.linkup/ppp.linkdown aren't currently used by IPV6CP

o Understand all protocols(5) in filter rules rather than only a select
few.

o Allow a mask specification for the ``delete'' command. It's now
possible to specifically delete one of two conflicting routes.

o When creating and deleting proxy arp entries, do it for all IPv4
interface addresses rather than doing it just for the ``current''
peer address.

o When iface-alias isn't in effect, don't blow away manually (via ``iface
add'') added interface addresses.

o When listening on a tcp server (diagnostic) socket, bind so that a
tcp46 socket is created -- allowing both IPv4 and IPv6 connections.

o When displaying ICMP traffic, don't display the icmp type twice.
When display traffic, display at least some information about unrecognised
traffic.

o Bump version

Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>

show more ...

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the pp

Handle hardware-imposed MTU/MRU limitations. PPPoE will no longer
allow MRU/MTU negotiations to exceed 1492.

Add an optional ``max'' specifier to ``set m[rt]u'', ie.

set mtu max 1480

Bump the ppp version number.

Sponsored by: Monzoon Networks AG and FreeBSD Services Limited

show more ...

When we change the interface MTU, run through the routing table and tweak
all route MTUs too.

Add ``enable/disable tcpmssfixup'', defaulting to enabled.

Suggested by: julian
Hijacked from: ru (ports/net/tcpmssd)

Support radius accounting, and add a packet count to throughput
statistics as a side effect.

Submitted by: Marcin Cieslak <saper@system.pl>

with some tweaks to RAD_ACCT_SESSION_ID and
RAD_ACCT_MULT

Support radius accounting, and add a packet count to throughput
statistics as a side effect.

Submitted by: Marcin Cieslak <saper@system.pl>

with some tweaks to RAD_ACCT_SESSION_ID and
RAD_ACCT_MULTI_SESSION_ID generation by me.

show more ...

Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the optio

Allow a ``timeout secs'' filter option to let specific packet types
effect the idle timer in different ways.

Submitted by: Stefan Esser <se@freebsd.org>

With adjustments by me to document the option in the man page and to
give the same semantics for outgoing traffic as incoming.

I made the style more consistent in ip.c - this should really have
been done as a separate commit.

show more ...

o Log the (payload/size) of all packet types, not just TCP packets

o If the new ``filter-decapsulation'' is enabled, delve into UDP packets
that contain 0xff 0x03 as the first two bytes, and if

o Log the (payload/size) of all packet types, not just TCP packets

o If the new ``filter-decapsulation'' is enabled, delve into UDP packets
that contain 0xff 0x03 as the first two bytes, and if we recognise it
as PROTO_IP, decapsulate it for the purpose of filter checking.

If we recognise it as PROTO_<anything else> mention this for logging
purposes only.

This change is aimed at people running PPPoUDP where the UDP traffic is
being sent over another PPP link. It's desireable to have the top level
link connected all the time, but to have the bottom level link capable
of decapsulating the traffic and comparing the payload against the filters,
thus allowing ``set filter dial ...'' to work in tunnelled environments.

The caveat here is that the top ppp cannot employ any compression layers
without making the data unreadable for the bottom ppp. ``disable deflate
pred1 vj'' and ``deny deflate pred1 vj'' is suggested.

show more ...

Add ``set ifqueue'' to control the size of the outgoing packet
queue. Doing ``set ifqueue 0'' and ``set urgent none'' will allow
full use of luigi's WF2Q code.

Requested by: luigi

When running ppp -background, show comfort messages showing
when we're redialing/reconnecting.

While we're here, log redial, reconnect and phone number
announcements to LogCHAT, and reduce some othe

When running ppp -background, show comfort messages showing
when we're redialing/reconnecting.

While we're here, log redial, reconnect and phone number
announcements to LogCHAT, and reduce some other logging to
LogDEBUG.

show more ...

Add the ``resolv'' command for telling ppp how to deal with resolv.conf.
You can now ``resolv restore'' in ppp.linkdown !
Add DNS0 and DNS1 macros.

Adjust whitespace

Correct some typos introduced in the descriptor -> fdescriptor change.

To avoid namespace polution in NetBSD:

``struct descriptor'' -> ``struct fdescriptor''

Handle the availability of TUNSIFHEAD. If it's there, use it.

For the moment this is just overhead, but it'll be used for INET6
support later.

Use TUNSIFPID when we change our PID (if it exists).

Cosmetic: Make struct mbuf more like kernel mbufs.