Remove residual blank line at start of Makefile

This is a residual of the $FreeBSD$ removal.

MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix

Add some ATF tests for ctladm

So far only "ctladm port -c" and "ctladm port -r" are covered.

MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: mav
Pull Request: https://github.com/freebsd/freeb

Add some ATF tests for ctladm

So far only "ctladm port -c" and "ctladm port -r" are covered.

MFC after: 2 weeks
Sponsored by: Axcient
Reviewed by: mav
Pull Request: https://github.com/freebsd/freebsd-src/pull/1279

show more ...

ctl: Support NVMe requests in debug trace functions

Reviewed by: imp
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D44719

Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

pkgbase: Move ctld/ctladm to iscsi package

While here only compile both of them if WITH_ISCSI is set (this is the default).

Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D3

pkgbase: Move ctld/ctladm to iscsi package

While here only compile both of them if WITH_ISCSI is set (this is the default).

Reviewed by: emaste
Differential Revision: https://reviews.freebsd.org/D30755
Sponsored by: Diablotin Systems

show more ...

Rework CTL frontend & backend options to use nv(3), allow creating multiple
ioctl frontend ports.

This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and

Rework CTL frontend & backend options to use nv(3), allow creating multiple
ioctl frontend ports.

This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and CTL_PORT_REQ ioctls.
Removes ctl_be_arg structure and associated logic and replaces it with
nv(3)-based logic for passing in and out arguments.
- Allows creating multiple ioctl frontend ports using either ctladm(8) or
ctld(8).
New frontend ports are represented by /dev/cam/ctl<pp>.<vp> nodes, eg /dev/cam/ctl5.3.
Those device nodes respond only to CTL_IO ioctl.

New command-line options for ctladm:
# creates new ioctl frontend port with using free pp and vp=0
ctladm port -c
# creates new ioctl frontend port with pp=10 and vp=0
ctladm port -c -O pp=10
# creates new ioctl frontend port with pp=11 and vp=12
ctladm port -c -O pp=11 -O vp=12
# removes port with number 4 (it's a "targ_port" number, not pp number)
ctladm port -r -p 4

New syntax for ctl.conf:
target ... {
port ioctl/<pp>
...
}

target ... {
port ioctl/<pp>/<vp>
...

Note: Most of this work was made by jceel@, thank you.

Submitted by: jceel
Reworked by: myself
Reviewed by: mav (earlier versions and recently during the rework)
Obtained from: FreeNAS and TrueOS
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D9299

show more ...

Split iscsi(4) ctl frontend off of ctl(4) as cfiscsi(4)

The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use

Split iscsi(4) ctl frontend off of ctl(4) as cfiscsi(4)

The goal of this work is to remove the explicit dependency for ctl(4)
on iscsi(4), so end-users without iscsi(4) support in the kernel can
use ctl(4) for its other functions.

This allows those without iscsi(4) support built into the kernel to use
ctl(4) as a test mechanism. As a sidenote, this was possible around the
10.0-RELEASE period, but made impossible for end-users without iscsi(4)
between 10.0-RELEASE and 11.0-RELEASE.

Automatically load cfiscsi(4) from ctladm(8) and ctld(8) for backwards
compatibility with previously releases. The automatic loading feature is
compiled into the beforementioned tools if MK_ISCSI == yes when building
world.

Add a manpage for cfiscsi(4) and refer to it in ctl(4).

Differential Revision: D10099
MFC after: 2 months
Relnotes: yes
Reviewed by: mav, trasz
Sponsored by: Dell EMC Isilon

show more ...

usr.sbin: normalize paths using SRCTOP-relative paths or :H when possible

This simplifies make logic/output

MFC after: 1 month
Sponsored by: Dell EMC Isilon

Merge sync of head

Reintegrate head: r274132-r277384

Sponsored by: The FreeBSD Foundation

Reintegrate head revisions r273096-r277147

Sponsored by: The FreeBSD Foundation

MFHead @ r275232

r274961 through r275075

Convert usr.sbin to LIBADD
Reduce overlinking

Merge from head@274682

Sync to HEAD@r274095.

Whitespace fixes.

MFC after: 1 month
Sponsored by: The FreeBSD Foundation

MFC

IFC @ r234692

sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c

- Add API to allow vmm FPU state init/save/restore.

FP stuff discussed with: kib

Merge head up to r232685 to projects/pf/head.

Add LUN resizing to CTL. Also make it possible to explicitly set
size when creating file-backed or device-backed LUN.

Reviewed by: ken (earlier version)
Sponsored by: The FreeBSD Foundation

IFC @230489 (pending review).

Add the CAM Target Layer (CTL).

CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) pro

Add the CAM Target Layer (CTL).

CTL is a disk and processor device emulation subsystem originally written
for Copan Systems under Linux starting in 2003. It has been shipping in
Copan (now SGI) products since 2005.

It was ported to FreeBSD in 2008, and thanks to an agreement between SGI
(who acquired Copan's assets in 2010) and Spectra Logic in 2010, CTL is
available under a BSD-style license. The intent behind the agreement was
that Spectra would work to get CTL into the FreeBSD tree.

Some CTL features:

- Disk and processor device emulation.
- Tagged queueing
- SCSI task attribute support (ordered, head of queue, simple tags)
- SCSI implicit command ordering support. (e.g. if a read follows a mode
select, the read will be blocked until the mode select completes.)
- Full task management support (abort, LUN reset, target reset, etc.)
- Support for multiple ports
- Support for multiple simultaneous initiators
- Support for multiple simultaneous backing stores
- Persistent reservation support
- Mode sense/select support
- Error injection support
- High Availability support (1)
- All I/O handled in-kernel, no userland context switch overhead.

(1) HA Support is just an API stub, and needs much more to be fully
functional.

ctl.c: The core of CTL. Command handlers and processing,
character driver, and HA support are here.

ctl.h: Basic function declarations and data structures.

ctl_backend.c,
ctl_backend.h: The basic CTL backend API.

ctl_backend_block.c,
ctl_backend_block.h: The block and file backend. This allows for using
a disk or a file as the backing store for a LUN.
Multiple threads are started to do I/O to the
backing device, primarily because the VFS API
requires that to get any concurrency.

ctl_backend_ramdisk.c: A "fake" ramdisk backend. It only allocates a
small amount of memory to act as a source and sink
for reads and writes from an initiator. Therefore
it cannot be used for any real data, but it can be
used to test for throughput. It can also be used
to test initiators' support for extremely large LUNs.

ctl_cmd_table.c: This is a table with all 256 possible SCSI opcodes,
and command handler functions defined for supported
opcodes.

ctl_debug.h: Debugging support.

ctl_error.c,
ctl_error.h: CTL-specific wrappers around the CAM sense building
functions.

ctl_frontend.c,
ctl_frontend.h: These files define the basic CTL frontend port API.

ctl_frontend_cam_sim.c: This is a CTL frontend port that is also a CAM SIM.
This frontend allows for using CTL without any
target-capable hardware. So any LUNs you create in
CTL are visible in CAM via this port.

ctl_frontend_internal.c,
ctl_frontend_internal.h:
This is a frontend port written for Copan to do
some system-specific tasks that required sending
commands into CTL from inside the kernel. This
isn't entirely relevant to FreeBSD in general,
but can perhaps be repurposed.

ctl_ha.h: This is a stubbed-out High Availability API. Much
more is needed for full HA support. See the
comments in the header and the description of what
is needed in the README.ctl.txt file for more
details.

ctl_io.h: This defines most of the core CTL I/O structures.
union ctl_io is conceptually very similar to CAM's
union ccb.

ctl_ioctl.h: This defines all ioctls available through the CTL
character device, and the data structures needed
for those ioctls.

ctl_mem_pool.c,
ctl_mem_pool.h: Generic memory pool implementation used by the
internal frontend.

ctl_private.h: Private data structres (e.g. CTL softc) and
function prototypes. This also includes the SCSI
vendor and product names used by CTL.

ctl_scsi_all.c,
ctl_scsi_all.h: CTL wrappers around CAM sense printing functions.

ctl_ser_table.c: Command serialization table. This defines what
happens when one type of command is followed by
another type of command.

ctl_util.c,
ctl_util.h: CTL utility functions, primarily designed to be
used from userland. See ctladm for the primary
consumer of these functions. These include CDB
building functions.

scsi_ctl.c: CAM target peripheral driver and CTL frontend port.
This is the path into CTL for commands from
target-capable hardware/SIMs.

README.ctl.txt: CTL code features, roadmap, to-do list.

usr.sbin/Makefile: Add ctladm.

ctladm/Makefile,
ctladm/ctladm.8,
ctladm/ctladm.c,
ctladm/ctladm.h,
ctladm/util.c: ctladm(8) is the CTL management utility.
It fills a role similar to camcontrol(8).
It allow configuring LUNs, issuing commands,
injecting errors and various other control
functions.

usr.bin/Makefile: Add ctlstat.

ctlstat/Makefile
ctlstat/ctlstat.8,
ctlstat/ctlstat.c: ctlstat(8) fills a role similar to iostat(8).
It reports I/O statistics for CTL.

sys/conf/files: Add CTL files.

sys/conf/NOTES: Add device ctl.

sys/cam/scsi_all.h: To conform to more recent specs, the inquiry CDB
length field is now 2 bytes long.

Add several mode page definitions for CTL.

sys/cam/scsi_all.c: Handle the new 2 byte inquiry length.

sys/dev/ciss/ciss.c,
sys/dev/ata/atapi-cam.c,
sys/cam/scsi/scsi_targ_bh.c,
scsi_target/scsi_cmds.c,
mlxcontrol/interface.c: Update for 2 byte inquiry length field.

scsi_da.h: Add versions of the format and rigid disk pages
that are in a more reasonable format for CTL.

amd64/conf/GENERIC,
i386/conf/GENERIC,
ia64/conf/GENERIC,
sparc64/conf/GENERIC: Add device ctl.

i386/conf/PAE: The CTL frontend SIM at least does not compile
cleanly on PAE.

Sponsored by: Copan Systems, SGI and Spectra Logic
MFC after: 1 month

show more ...