Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

bthidd(8): Add evdev protocol support for bluetooth keyboards and mouses

User-visible changes:

"-u" is added to to list of command line options supported by bthidd.
Use it to enable evdev support.

bthidd(8): Add evdev protocol support for bluetooth keyboards and mouses

User-visible changes:

"-u" is added to to list of command line options supported by bthidd.
Use it to enable evdev support. uinput and evdev modules should be
kld-loaded or compiled into the kernel in that case.

bthidd_evdev_support rc.conf variable is added to control enabling of
evdev support in bthidd startup script. Possible values are: "YES", "NO",
"AUTO"(default). Setting bthidd_evdev_support to "AUTO" inserts "-u" option
if kernel is compiled with EVDEV_SUPPORT option enabled.

Support for consumer HID usage page keyboard events is implemented. Most of
them are available only through evdev protocol.

kern.evdev.rcpt_mask sysctl is checked, so "sysctl kern.evdev.rcpt_mask=12"
should be executed if EVDEV_SUPPORT is compiled into kernel.

It is recommended to regenerate bthidd.conf entries with bthidcontrol(8)
"Query" command to set user-friendly names of bluetooth devices.

Reviewed by: emax, gonzo, wblock (docs), bcr (docs, early version)
Differential Revision: https://reviews.freebsd.org/D13456

show more ...

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

various: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Merge ^/head r323559 through r325504.

MFhead@r325199

bthidd(8): Generate button release event after virtual T-axis button press

Apply PR/213957 (r308165, Make sure the virtual T-axis buttons generate button
release event(s) for continuous tilting) to

bthidd(8): Generate button release event after virtual T-axis button press

Apply PR/213957 (r308165, Make sure the virtual T-axis buttons generate button
release event(s) for continuous tilting) to bluetooth mouse support.

Reviewed by: emax, gonzo
Approved by: gonzo (mentor)
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D12672

show more ...

Merge ^/head r322398 through r322746.

MFhead@r322451

bthidd(8): Add support for Apple's magic mouse

Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record wi

bthidd(8): Add support for Apple's magic mouse

Note: Mouse's bthidd.conf record should contain vendor and device IDs
to make proper device detection. If it does not contain IDs,
regenerate record with "Query" command of recent bthidcontrol(8).

Submitted by: Dirk Engling <erdgeist@erdgeist.org>
Reviewed by: emax
Approved by: bapt (mentor), gonzo (mentor)
Differential Revision: https://reviews.freebsd.org/D3702

show more ...

Catch up with HEAD (r280229-r284686).

Merge sync of head

Merge from head

MFH: r280643-r281852

Sponsored by: The FreeBSD Foundation

Check l2cap socket initialisation and define L2CAP_SOCKET_CHECKED
This will fix build.

bthidd: Remove unused macros from hid.c.

ASIZE() was never used, and min() stopped being used in r207812.

Differential Revision: https://reviews.freebsd.org/D2230
Reviewed by: emax
Approved by: ema

bthidd: Remove unused macros from hid.c.

ASIZE() was never used, and min() stopped being used in r207812.

Differential Revision: https://reviews.freebsd.org/D2230
Reviewed by: emax
Approved by: emax
MFC after: 1 week

show more ...

bthidd: Consider usage ranges when dealing with array inputs.

So far, we were always using HID_USAGE() to determine the Usage ID of a
certain HID report input item. This does not work as intended if

bthidd: Consider usage ranges when dealing with array inputs.

So far, we were always using HID_USAGE() to determine the Usage ID of a
certain HID report input item. This does not work as intended if a field
is an array and the allowed usages are specified with a usage range, as
HID_USAGE() will return 0. We need to use the field value as an index in
the usage range list in this case instead.

This makes the volume keys in a Microsoft Bluetooth Mobile Keyboard
5000 be properly recognized. The relevant part of the HID report looks
like this:

0xA1, 0x01, // Collection (Application)
0x85, 0x07, // Report ID (7)
0x05, 0x0C, // Usage Page (Consumer)
0x19, 0x00, // Usage Minimum (Unassigned)
0x2A, 0xFF, 0x03, // Usage Maximum (0x03FF)
0x95, 0x01, // Report Count (1)
0x75, 0x10, // Report Size (16)
0x15, 0x00, // Logical Minimum (0)
0x27, 0xFF, 0x03, 0x00, 0x00, // Logical Maximum (1023)
0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred
// State,No Null Position)

When a key such as "volume down" is pressed, the following data is
transferred through Interrupt In:

0x07 0xEA 0x00

Differential Revision: https://reviews.freebsd.org/D2229
Reviewed by: emax
Approved by: emax
MFC after: 1 week

show more ...

MFC

Encode horizontal scroll events (AC Pan) as button presses (bit 5 and 6)

Submitted by: David Demelier demelier dot david at gmail dot com
MFC after: 1 week

Make sure to only pickup hid_input items when parsing input reports.
As it turns out, libusbhid(3) also picks up hic_collection items even
though we explicitly requested hid_input items only.

Tested

Make sure to only pickup hid_input items when parsing input reports.
As it turns out, libusbhid(3) also picks up hic_collection items even
though we explicitly requested hid_input items only.

Tested by: Buganini < buganini at gmail dot com >
MFC after: 1 week

show more ...

MFC r205728

Merge improvements from kernel HID parser to the userland usbhid(3)
parser. This merge does not change any API and should not break any
native or thirdparty applications.

Chang

MFC r205728

Merge improvements from kernel HID parser to the userland usbhid(3)
parser. This merge does not change any API and should not break any
native or thirdparty applications.

Changes include:

* Merge multiple report ID support and other improvements from kernel
HID parser.
* Ignore rid argument in hid_start_parser, parse all the report items since
we now support multiple report ID.
* Skip report ID byte in hid_get_data() and set report ID byte in
hid_set_data(), if report ID is non-zero.
* Reimplement hid_get_report_id: instead get report id from uhid device
(which is always 0), try parsing the report descriptor and return the
first report ID encountered.

MFC r207812

hid_get_data() now expects that the hid data passed in always contains
the report ID byte. Thus we should not skip the the report ID byte in
hid_interrupt(). Also, if HUP_KEYBOARD usage is an array, do not try
to modify the 'data' pointer, instead, increase the hid_item_t field
'pos' by 'report_size' before calling hid_get_data() during each
iteration.

show more ...

Catch up with libusbhid merge (rev 205728).

hid_get_data() now expects that the hid data passed in always contains
the report ID byte. Thus we should not skip the the report ID byte in
hid_interrupt

Catch up with libusbhid merge (rev 205728).

hid_get_data() now expects that the hid data passed in always contains
the report ID byte. Thus we should not skip the the report ID byte in
hid_interrupt(). Also, if HUP_KEYBOARD usage is an array, do not try
to modify the 'data' pointer, instead, increase the hid_item_t field
'pos' by 'report_size' before calling hid_get_data() during each
iteration.

PR: usb/146367
Reported and tested by: Alex Deiter
Pointy hat to: kaiw
Reviewed by: emax

show more ...

Fix a typo introduced in the last commit: WWW Refresh is 0x227, not 0227

Approved by: emax (mentor)
MFC after: 1 day

Update bthidd(8) code and hook it up to the build.
bthidd(8) now was integrated with vkbd(4) and supports
multiple keyboards via vkbd(4)/kbdmux(4).

The code was tested with Apple Bluetooth keyboard

Update bthidd(8) code and hook it up to the build.
bthidd(8) now was integrated with vkbd(4) and supports
multiple keyboards via vkbd(4)/kbdmux(4).

The code was tested with Apple Bluetooth keyboard and
SE k700i cell phone (remote control feature).

MFC after: 1 month

show more ...

Properly map mouse buttons

PR: bin/94577
Submitted by: Krzysztof Jedruczyk < beaker at hot dot pl >
MFC after: 3 days