Replace calls to bus_generic_attach with bus_attach_children

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D47675

newbus: replace -1 in BUS_ADD_CHILD(...-1) with DEVICE_UNIT_ANY

Sponsored by: Netflix

newbus: globally replace device_add_child(..., -1) with DEVICE_UNIT_ANY

Sponsored by: Netflix

Retire unused non-PCI_RES_BUS code

All architectures define PCI_RES_BUS unconditionally now that only
NEW_PCIB is supported, so we no longer need the legacy code.

Reviewed by: jhb, andrew
Different

Retire unused non-PCI_RES_BUS code

All architectures define PCI_RES_BUS unconditionally now that only
NEW_PCIB is supported, so we no longer need the legacy code.

Reviewed by: jhb, andrew
Differential Revision: https://reviews.freebsd.org/D32955

show more ...

Retire non-NEW_PCIB code and remove config option

All architectures enable NEW_PCIB in DEFAULTS (arm being the most recent
to do so in 121be555997b (arm: Set NEW_PCIB in DEFAULTS rather than a
subse

Retire non-NEW_PCIB code and remove config option

All architectures enable NEW_PCIB in DEFAULTS (arm being the most recent
to do so in 121be555997b (arm: Set NEW_PCIB in DEFAULTS rather than a
subset of kernel configs")), so it's time we removed the legacy code
that no longer sees much testing and has a significant maintenance
burden.

Reviewed by: jhb, andrew, emaste
Differential Revision: https://reviews.freebsd.org/D32954

show more ...

x86: Use pci_domain_[de]activate_bus for PCI_RES_BUS resources

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D43430

pci_cfgreg: Add a PCI domain argument to the low-level register API

This commit changes the API of pci_cfgreg(read|write) to add a domain
argument (referred to as a segment in ACPI parlance) (note t

pci_cfgreg: Add a PCI domain argument to the low-level register API

This commit changes the API of pci_cfgreg(read|write) to add a domain
argument (referred to as a segment in ACPI parlance) (note that this
is not the same as a NUMA domain, but something PCI-specific). This
does not yet enable access to domains other than 0, but updates the
API to support domains.

Places that use hard-coded bus/slot/function addresses have been
updated to hardcode a domain of 0. A few places that have the PCI
domain (segment) available such as the acpi_pcib_acpi.c Host-PCI
bridge driver pass the PCI domain.

The hpt27xx(4) and hptnr(4) drivers fail to attach to a device not on
domain 0 since they provide APIs to their binary blobs that only
permit bus/slot/function addressing.

The x86 non-ACPI PCI bus drivers all hardcode a domain of 0 as they do
not support multiple domains.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D42827

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

x86: Remove unused devclass arguments to DRIVER_MODULE.

x86: clean up empty lines in .c and .h files

sys/x86: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/x86: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MFH @ r323558.

MFhead@r323343

Enhance qpi.c to make it usable on all Core-microarchitecture Xeons.

Scan all buses for CSR bus, not stopping on the first failed
match. Scan all slots for function 0 on the found bus, for instance

Enhance qpi.c to make it usable on all Core-microarchitecture Xeons.

Scan all buses for CSR bus, not stopping on the first failed
match. Scan all slots for function 0 on the found bus, for instance on
IvyBridge the slot 0 is not decoded at all. Since the scan is quite
unsafe, and access to the buses is mostly useful for developers,
enable the csr buses scan with the tunable.

Current qpi.c makes too many assumptions about the uncore
configuration buses location and about slots occupied. Also it
restricts itself only to Nehalem CPUs. It is needed on all Core-based
Xeons. On the 2600 v2 (IvyBridge) machine I have access to, the CSR
buses have numbers 31 (BSP socket) and 63 (second socket), and there
is no functions pci0.31.0.0 or pci0.63.0.0. According to the CPU
datasheet, all devices on the uncore bus occupy slots >= 8.

Practically, the attach to config buses is required for the intel-pcm
pcm-memory.x tool to work, for instance.

Reviewed by: jhb (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D12268

show more ...

Consistently use tabs for indent.

Sponsored by: The FreeBSD Foundation
MFC after: 1 week

Fix typos. Stop claiming that two children are created.

Sponsored by: The FreeBSD Foundation
MFC after: 1 week

MfH @r295202

Expect to see panics in routing code at least now.

Merge ^/head r294777 through r294960.

MFH

Sponsored by: The FreeBSD Foundation

Convert rman to use rman_res_t instead of u_long

Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.

This is step on

Convert rman to use rman_res_t instead of u_long

Summary:
Migrate to using the semi-opaque type rman_res_t to specify rman resources. For
now, this is still compatible with u_long.

This is step one in migrating rman to use uintmax_t for resources instead of
u_long.

Going forward, this could feasibly be used to specify architecture-specific
definitions of resource ranges, rather than baking a specific integer type into
the API.

This change has been broken out to facilitate MFC'ing drivers back to 10 without
breaking ABI.

Reviewed By: jhb
Sponsored by: Alex Perez/Inertial Computing
Differential Revision: https://reviews.freebsd.org/D5075

show more ...

Merge from head

Sponsored by: Gandi.net

Merge from head

Merge from head