sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

powerpc64: Implement Radix MMU for POWER9 CPUs

Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures

powerpc64: Implement Radix MMU for POWER9 CPUs

Summary:
POWER9 supports two MMU formats: traditional hashed page tables, and Radix
page tables, similar to what's presesnt on most other architectures. The
PowerISA also specifies a process table -- a table of page table pointers--
which on the POWER9 is only available with the Radix MMU, so we can take
advantage of it with the Radix MMU driver.

Written by Matt Macy.

Differential Revision: https://reviews.freebsd.org/D19516

show more ...

Move the powerpc64 direct map base address from zero to high memory. This
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundw

Move the powerpc64 direct map base address from zero to high memory. This
accomplishes a few things:
- Makes NULL an invalid address in the kernel, which is useful for catching
bugs.
- Lays groundwork for radix-tree translation on POWER9, which requires the
direct map be at high memory.
- Similarly lays groundwork for a direct map on 64-bit Book-E.

The new base address is chosen as the base of the fourth radix quadrant
(the minimum kernel address in this translation mode) and because all
supported CPUs ignore at least the first two bits of addresses in real
mode, allowing direct-map addresses to be used in real-mode handlers.
This is required by Linux and is part of the architecture standard
starting in POWER ISA 3, so can be relied upon.

Reviewed by: jhibbits, Breno Leitao
Differential Revision: D14499

show more ...

sys/powerpc: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - e

sys/powerpc: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

svn+ssh://svn.freebsd.org/base/head@216199

Sync: merge r214353 through r214648 from ^/head.

Restructure the way the copyin/copyout segment is stored to prevent a
concurrency bug. Since all SLB/SR entries were invalidated during an
exception, a decrementer exception could cause the user segm

Restructure the way the copyin/copyout segment is stored to prevent a
concurrency bug. Since all SLB/SR entries were invalidated during an
exception, a decrementer exception could cause the user segment to be
invalidated during a copyin()/copyout() without a thread switch that
would cause it to be restored from the PCB, potentially causing the
operation to continue on invalid memory. This is now handled by explicit
restoration of segment 12 from the PCB on 32-bit systems and a check in
the Data Segment Exception handler on 64-bit.

While here, cause copyin()/copyout() to check whether the requested
user segment is already installed, saving some pipeline flushes, and
fix the synchronization primitives around the mtsr and slbmte
instructions to prevent accessing stale segments.

MFC after: 2 weeks

show more ...

Merge svn+ssh://svn.freebsd.org/base/head@214309

Split the SLB mirror cache into two kinds of object, one for kernel maps
which are similar to the previous ones, and one for user maps, which
are arrays of pointers into the SLB tree. This changes ma

Split the SLB mirror cache into two kinds of object, one for kernel maps
which are similar to the previous ones, and one for user maps, which
are arrays of pointers into the SLB tree. This changes makes user SLB
updates atomic, closing a window for memory corruption. While here,
rearrange the allocation functions to make context switches faster.

show more ...

Merge svn+ssh://svn.freebsd.org/base/head@211344

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kerne

MFppc64:

Kernel sources for 64-bit PowerPC, along with build-system changes to keep
32-bit kernels compiling (build system changes for 64-bit kernels are
coming later). Existing 32-bit PowerPC kernel configurations must be
updated after this change to specify their architecture.

show more ...

MFC r204128:

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 i

MFC r204128:

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 in an ad-hoc way. To make this work
properly required sharing the entire kernel PMAP with Open Firmware, so
ofw_pmap is transformed into a stub on 64-bit CPUs.

Also implement some more tweaks to get more mileage out of our limited
amount of KVA, principally by extending KVA into segment 16 until the
beginning of the first OFW mapping.

Reported by: linimon

show more ...

IFH@204581

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 in an ad-hoc wa

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 in an ad-hoc way. To make this work
properly required sharing the entire kernel PMAP with Open Firmware, so
ofw_pmap is transformed into a stub on 64-bit CPUs.

Also implement some more tweaks to get more mileage out of our limited
amount of KVA, principally by extending KVA into segment 16 until the
beginning of the first OFW mapping.

Reported by: linimon

show more ...

/* -> /*- for license, minor formatting changes

Increase kernel VA from 256Mb to 512Mb by shifting the segment used
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.

It would be nice to have more available, but segments low

Increase kernel VA from 256Mb to 512Mb by shifting the segment used
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.

It would be nice to have more available, but segments lower than
this are reserved for either memory or 1:1 mapped device i/o,
and seg 15 is OpenFirmware ROM. Also, the effort to keep OpenFirmware
available for callbacks limits the use of VA-mapped segments.
Fortunately UMA_MD_SMALL_ALLOC takes away a lot of VM pressure.

Obtained from: NetBSD

show more ...

Cleaned up param.h:

- culled long-dead #define's
- segment register defs moved to sr.h
- NPMAPS moved to pmap.h
- KERNBASE moved to vmparam.h
- removed include of <machine/cpu.h> and fixed src

Cleaned up param.h:

- culled long-dead #define's
- segment register defs moved to sr.h
- NPMAPS moved to pmap.h
- KERNBASE moved to vmparam.h
- removed include of <machine/cpu.h> and fixed src files that
relied on this.

Modifying segment register code no longer causes gcc rebuilds :-)

show more ...

style(9)

Complete rework of the PowerPC pmap and a number of other bits in the early
boot sequence.

The new pmap.c is based on NetBSD's newer pmap.c (for the mpc6xx processors)
which is 70% faster than the o

Complete rework of the PowerPC pmap and a number of other bits in the early
boot sequence.

The new pmap.c is based on NetBSD's newer pmap.c (for the mpc6xx processors)
which is 70% faster than the older code that the original pmap.c was based
on. It has also been based on the framework established by jake's initial
sparc64 pmap.c.

There is no change to how far the kernel gets (it makes it to the mountroot
prompt in psim) but the new pmap code is a lot cleaner.

Obtained from: NetBSD (pmap code)

show more ...

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 in an ad-hoc wa

Reduce KVA pressure on OEA64 systems running in bridge mode by mapping
UMA segments at their physical addresses instead of into KVA. This emulates
the direct mapping behavior of OEA32 in an ad-hoc way. To make this work
properly required sharing the entire kernel PMAP with Open Firmware, so
ofw_pmap is transformed into a stub on 64-bit CPUs.

Also implement some more tweaks to get more mileage out of our limited
amount of KVA, principally by extending KVA into segment 16 until the
beginning of the first OFW mapping.

Reported by: linimon

show more ...

/* -> /*- for license, minor formatting changes

Increase kernel VA from 256Mb to 512Mb by shifting the segment used
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.

It would be nice to have more available, but segments low

Increase kernel VA from 256Mb to 512Mb by shifting the segment used
for user copyinout down to 12, and keeping segments 13/14 for
kernel VA.

It would be nice to have more available, but segments lower than
this are reserved for either memory or 1:1 mapped device i/o,
and seg 15 is OpenFirmware ROM. Also, the effort to keep OpenFirmware
available for callbacks limits the use of VA-mapped segments.
Fortunately UMA_MD_SMALL_ALLOC takes away a lot of VM pressure.

Obtained from: NetBSD

show more ...

Cleaned up param.h:

- culled long-dead #define's
- segment register defs moved to sr.h
- NPMAPS moved to pmap.h
- KERNBASE moved to vmparam.h
- removed include of <machine/cpu.h> and fixed src

Cleaned up param.h:

- culled long-dead #define's
- segment register defs moved to sr.h
- NPMAPS moved to pmap.h
- KERNBASE moved to vmparam.h
- removed include of <machine/cpu.h> and fixed src files that
relied on this.

Modifying segment register code no longer causes gcc rebuilds :-)

show more ...

style(9)