sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

net: clean up empty lines in .c and .h files

MFHead@r345275

Add SPDX-License-Identifier and update year in copyright.

MFC after: 1 month

Modify struct nat64_config.

Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side transla

Modify struct nat64_config.

Add second IPv6 prefix to generic config structure and rename another
fields to conform to RFC6877. Now it contains two prefixes and length:
PLAT is provider-side translator that translates N:1 global IPv6 addresses
to global IPv4 addresses. CLAT is customer-side translator (XLAT) that
algorithmically translates 1:1 IPv4 addresses to global IPv6 addresses.
Use PLAT prefix in stateless (nat64stl) and stateful (nat64lsn)
translators.

Modify nat64_extract_ip4() and nat64_embed_ip4() functions to accept
prefix length and use plat_plen to specify prefix length.

Retire net.inet.ip.fw.nat64_allow_private sysctl variable.
Add NAT64_ALLOW_PRIVATE flag and use "allow_private" config option to
configure this ability separately for each NAT64 instance.

Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC

show more ...

Merge ^/head r340918 through r341763.

Reimplement how net.inet.ip.fw.dyn_keep_states works.

Turning on of this feature allows to keep dynamic states when parent
rule is deleted. But it works only when the default rule is
"allow from any

Reimplement how net.inet.ip.fw.dyn_keep_states works.

Turning on of this feature allows to keep dynamic states when parent
rule is deleted. But it works only when the default rule is
"allow from any to any".

Now when rule with dynamic opcode is going to be deleted, and
net.inet.ip.fw.dyn_keep_states is enabled, existing states will reference
named objects corresponding to this rule, and also reference the rule.
And when ipfw_dyn_lookup_state() will find state for deleted parent rule,
it will return the pointer to the deleted rule, that is still valid.
This implementation doesn't support O_LIMIT_PARENT rules.

The refcnt field was added to struct ip_fw to keep reference, also
next pointer added to be able iterate rules and not damage the content
when deleted rules are chained.

Named objects are referenced only when states are going to be deleted to
be able reuse kidx of named objects when new parent rules will be
installed.

ipfw_dyn_get_count() function was modified and now it also looks into
dynamic states and constructs maps of existing named objects. This is
needed to correctly export orphaned states into userland.

ipfw_free_rule() was changed to be global, since now dynamic state can
free rule, when it is expired and references counters becomes 1.

External actions subsystem also modified, since external actions can be
deregisterd and instances can be destroyed. In these cases deleted rules,
that are referenced by orphaned states, must be modified to prevent access
to freed memory. ipfw_dyn_reset_eaction(), ipfw_reset_eaction_instance()
functions added for these purposes.

Obtained from: Yandex LLC
MFC after: 2 months
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D17532

show more ...

Bring in some last changes in NAT64 implementation:

o Modify ipfw(8) to be able set any prefix6 not just Well-Known,
and also show configured prefix6;
o relocate some definitions and macros into p

Bring in some last changes in NAT64 implementation:

o Modify ipfw(8) to be able set any prefix6 not just Well-Known,
and also show configured prefix6;
o relocate some definitions and macros into proper place;
o convert nat64_debug and nat64_allow_private variables to be
VNET-compatible;
o add struct nat64_config that keeps generic configuration needed
to NAT64 code;
o add nat64_check_prefix6() function to check validness of specified
by user IPv6 prefix according to RFC6052;
o use nat64_check_private_ip4() and nat64_embed_ip4() functions
instead of nat64_get_ip4() and nat64_set_ip4() macros. This allows
to use any configured IPv6 prefixes that are allowed by RFC6052;
o introduce NAT64_WKPFX flag, that is set when IPv6 prefix is
Well-Known IPv6 prefix. It is used to reduce overhead to check this;
o modify nat64lsn_cfg and nat64stl_cfg structures to use nat64_config
structure. And respectivelly modify the rest of code;
o remove now unused ro argument from nat64_output() function;
o remove __FreeBSD_version ifdef, NAT64 was not merged to older versions;
o add commented -DIPFIREWALL_NAT64_DIRECT_OUTPUT flag to module's Makefile
as example.

Obtained from: Yandex LLC
MFC after: 1 month
Sponsored by: Yandex LLC

show more ...

Fix integer types mismatch for flags field in nat64stl_cfg structure.

Also preserve internal flags on NAT64STL reconfiguration.

Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC

Merge ^/head r323559 through r325504.

MFhead@r320180

Do not acquire IPFW_WLOCK when a named object is created and destroyed.

Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of

Do not acquire IPFW_WLOCK when a named object is created and destroyed.

Acquiring of IPFW_WLOCK is requried for cases when we are going to
change some data that can be accessed during processing of packets flow.
When we create new named object, there are not yet any rules, that
references it, thus holding IPFW_UH_WLOCK is enough to safely update
needed structures. When we destroy an object, we do this only when its
reference counter becomes zero. And it is safe to not acquire IPFW_WLOCK,
because noone references it. The another case is when we failed to finish
some action and thus we are doing rollback and destroying an object, in
this case it is still not referenced by rules and no need to acquire
IPFW_WLOCK.

This also fixes panic with INVARIANTS due to recursive IPFW_WLOCK acquiring.

MFC after: 1 week
Sponsored by: Yandex LLC

show more ...

Merge ^/head r303250 through r304235.

MFhead @ r304061

Add ipfw_nat64 module that implements stateless and stateful NAT64.

The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action w

Add ipfw_nat64 module that implements stateless and stateful NAT64.

The module works together with ipfw(4) and implemented as its external
action module.

Stateless NAT64 registers external action with name nat64stl. This
keyword should be used to create NAT64 instance and to address this
instance in rules. Stateless NAT64 uses two lookup tables with mapped
IPv4->IPv6 and IPv6->IPv4 addresses to perform translation.

A configuration of instance should looks like this:
1. Create lookup tables:
# ipfw table T46 create type addr valtype ipv6
# ipfw table T64 create type addr valtype ipv4
2. Fill T46 and T64 tables.
3. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
4. Create NAT64 instance:
# ipfw nat64stl NAT create table4 T46 table6 T64
5. Add rules that matches the traffic:
# ipfw add nat64stl NAT ip from any to table(T46)
# ipfw add nat64stl NAT ip from table(T64) to 64:ff9b::/96
6. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Stateful NAT64 registers external action with name nat64lsn. The only
one option required to create nat64lsn instance - prefix4. It defines
the pool of IPv4 addresses used for translation.

A configuration of instance should looks like this:
1. Add rule to allow neighbor solicitation and advertisement:
# ipfw add allow icmp6 from any to any icmp6types 135,136
2. Create NAT64 instance:
# ipfw nat64lsn NAT create prefix4 A.B.C.D/28
3. Add rules that matches the traffic:
# ipfw add nat64lsn NAT ip from any to A.B.C.D/28
# ipfw add nat64lsn NAT ip6 from any to 64:ff9b::/96
4. Configure DNS64 for IPv6 clients and add route to 64:ff9b::/96
via NAT64 host.

Obtained from: Yandex LLC
Relnotes: yes
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D6434

show more ...