sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

Add modular fib lookup framework.

This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookup

Add modular fib lookup framework.

This change introduces framework that allows to dynamically
attach or detach longest prefix match (lpm) lookup algorithms
to speed up datapath route tables lookups.

Framework takes care of handling initial synchronisation,
route subscription, nhop/nhop groups reference and indexing,
dataplane attachments and fib instance algorithm setup/teardown.
Framework features automatic algorithm selection, allowing for
picking the best matching algorithm on-the-fly based on the
amount of routes in the routing table.

Currently framework code is guarded under FIB_ALGO config option.
An idea is to enable it by default in the next couple of weeks.

The following algorithms are provided by default:
IPv4:
* bsearch4 (lockless binary search in a special IP array), tailored for
small-fib (<16 routes)
* radix4_lockless (lockless immutable radix, re-created on every rtable change),
tailored for small-fib (<1000 routes)
* radix4 (base system radix backend)
* dpdk_lpm4 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)
IPv6:
* radix6_lockless (lockless immutable radix, re-created on every rtable change),
tailed for small-fib (<1000 routes)
* radix6 (base system radix backend)
* dpdk_lpm6 (DPDK DIR24-8-based lookups), lockless datastrucure, optimized
for large-fib (D27412)

Performance changes:
Micro benchmarks (I7-7660U, single-core lookups, 2048k dst, code in D27604):
IPv4:
8 routes:
radix4: ~20mpps
radix4_lockless: ~24.8mpps
bsearch4: ~69mpps
dpdk_lpm4: ~67 mpps
700k routes:
radix4_lockless: 3.3mpps
dpdk_lpm4: 46mpps

IPv6:
8 routes:
radix6_lockless: ~20mpps
dpdk_lpm6: ~70mpps
100k routes:
radix6_lockless: 13.9mpps
dpdk_lpm6: 57mpps

Forwarding benchmarks:
+ 10-15% IPv4 forwarding performance (small-fib, bsearch4)
+ 25% IPv4 forwarding performance (full-view, dpdk_lpm4)
+ 20% IPv6 forwarding performance (full-view, dpdk_lpm6)

Control:
Framwork adds the following runtime sysctls:

List algos
* net.route.algo.inet.algo_list: bsearch4, radix4_lockless, radix4
* net.route.algo.inet6.algo_list: radix6_lockless, radix6, dpdk_lpm6
Debug level (7=LOG_DEBUG, per-route)
net.route.algo.debug_level: 5
Algo selection (currently only for fib 0):
net.route.algo.inet.algo: bsearch4
net.route.algo.inet6.algo: radix6_lockless

Support for manually changing algos in non-default fib will be added
soon. Some sysctl names will be changed in the near future.

Differential Revision: https://reviews.freebsd.org/D27401

show more ...

Refactor fib4/fib6 functions.

No functional changes.

* Make lookup path of fib<4|6>_lookup_debugnet() separate functions
(fib<46>_lookup_rt()). These will be used in the control plane code
requir

Refactor fib4/fib6 functions.

No functional changes.

* Make lookup path of fib<4|6>_lookup_debugnet() separate functions
(fib<46>_lookup_rt()). These will be used in the control plane code
requiring unlocked radix operations and actual prefix pointer.
* Make lookup part of fib<4|6>_check_urpf() separate functions.
This change simplifies the switch to alternative lookup implementations,
which helps algorithmic lookups introduction.
* While here, use static initializers for IPv4/IPv6 keys

Differential Revision: https://reviews.freebsd.org/D27405

show more ...

Implement flowid calculation for outbound connections to balance
connections over multiple paths.

Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code f

Implement flowid calculation for outbound connections to balance
connections over multiple paths.

Multipath routing relies on mbuf flowid data for both transit
and outbound traffic. Current code fills mbuf flowid from inp_flowid
for connection-oriented sockets. However, inp_flowid is currently
not calculated for outbound connections.

This change creates simple hashing functions and starts calculating hashes
for TCP,UDP/UDP-Lite and raw IP if multipath routes are present in the
system.

Reviewed by: glebius (previous version),ae
Differential Revision: https://reviews.freebsd.org/D26523

show more ...

net: clean up empty lines in .c and .h files

Complete conversions from fib<4|6>_lookup_nh_<basic|ext> to fib<4|6>_lookup().

fib[46]_lookup_nh_ represents pre-epoch generation of fib api, providing less guarantees
over pointer validness and re

Complete conversions from fib<4|6>_lookup_nh_<basic|ext> to fib<4|6>_lookup().

fib[46]_lookup_nh_ represents pre-epoch generation of fib api, providing less guarantees
over pointer validness and requiring on-stack data copying.

With no callers remaining, remove fib[46]_lookup_nh_ functions.

Submitted by: Neel Chauhan <neel AT neelc DOT org>
Differential Revision: https://reviews.freebsd.org/D25445

show more ...

Convert debugnet to the new routing KPI.

Introduce new fib[46]_lookup_debugnet() functions serving as a
special interface for the crash-time operations. Underlying
implementation will try to return

Convert debugnet to the new routing KPI.

Introduce new fib[46]_lookup_debugnet() functions serving as a
special interface for the crash-time operations. Underlying
implementation will try to return lookup result if
datastructures are not corrupted, avoding locking.

Convert debugnet to use fib4_lookup_debugnet() and switch it
to use nexthops instead of rtentries.

Reviewed by: cem
Differential Revision: https://reviews.freebsd.org/D24555

show more ...

Introduce nexthop objects and new routing KPI.

This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .

Introduce nexthop objects and new routing KPI.

This is the foundational change for the routing subsytem rearchitecture.
More details and goals are available in https://reviews.freebsd.org/D24141 .

This patch introduces concept of nexthop objects and new nexthop-based
routing KPI.

Nexthops are objects, containing all necessary information for performing
the packet output decision. Output interface, mtu, flags, gw address goes
there. For most of the cases, these objects will serve the same role as
the struct rtentry is currently serving.
Typically there will be low tens of such objects for the router even with
multiple BGP full-views, as these objects will be shared between routing
entries. This allows to store more information in the nexthop.

New KPI:

struct nhop_object *fib4_lookup(uint32_t fibnum, struct in_addr dst,
uint32_t scopeid, uint32_t flags, uint32_t flowid);
struct nhop_object *fib6_lookup(uint32_t fibnum, const struct in6_addr *dst6,
uint32_t scopeid, uint32_t flags, uint32_t flowid);

These 2 function are intended to replace all all flavours of
<in_|in6_>rtalloc[1]<_ign><_fib>, mpath functions and the previous
fib[46]-generation functions.

Upon successful lookup, they return nexthop object which is guaranteed to
exist within current NET_EPOCH. If longer lifetime is desired, one can
specify NHR_REF as a flag and get a referenced version of the nexthop.
Reference semantic closely resembles rtentry one, allowing sed-style conversion.

Additionally, another 2 functions are introduced to support uRPF functionality
inside variety of our firewalls. Their primary goal is to hide the multipath
implementation details inside the routing subsystem, greatly simplifying
firewalls implementation:

int fib4_lookup_urpf(uint32_t fibnum, struct in_addr dst, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);
int fib6_lookup_urpf(uint32_t fibnum, const struct in6_addr *dst6, uint32_t scopeid,
uint32_t flags, const struct ifnet *src_if);

All functions have a separate scopeid argument, paving way to eliminating IPv6 scope
embedding and allowing to support IPv4 link-locals in the future.

Structure changes:
* rtentry gets new 'rt_nhop' pointer, slightly growing the overall size.
* rib_head gets new 'rnh_preadd' callback pointer, slightly growing overall sz.

Old KPI:
During the transition state old and new KPI will coexists. As there are another 4-5
decent-sized conversion patches, it will probably take a couple of weeks.
To support both KPIs, fields not required by the new KPI (most of rtentry) has to be
kept, resulting in the temporary size increase.
Once conversion is finished, rtentry will notably shrink.

More details:
* architectural overview: https://reviews.freebsd.org/D24141
* list of the next changes: https://reviews.freebsd.org/D24232

Reviewed by: ae,glebius(initial version)
Differential Revision: https://reviews.freebsd.org/D24232

show more ...

Merge ^/head r358466 through r358677.

in6_fib: return nh_ia in the ext interface as we do for IPv4

Like for IPv4 add nh_ia to the ext interface and return rt_ifa
in order to be used for, e.g., packet/octets accounting purposes.

Reviewe

in6_fib: return nh_ia in the ext interface as we do for IPv4

Like for IPv4 add nh_ia to the ext interface and return rt_ifa
in order to be used for, e.g., packet/octets accounting purposes.

Reviewed by: melifaro
MFC after: 1 week
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D23873

show more ...

Merge ^/head r314420 through r314481.

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

show more ...

MFH r289384-r293170

Sponsored by: The FreeBSD Foundation

MFH @r292599

This includes the pluggable TCP framework and other chnages to the
netstack to track for VNET stability.

Security: The FreeBSD Foundation

Merge helper fib* functions used for basic lookups.

Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?".

Merge helper fib* functions used for basic lookups.

Vast majority of rtalloc(9) users require only basic info from
route table (e.g. "does the rtentry interface match with the interface
I have?". "what is the MTU?", "Give me the IPv4 source address to use",
etc..).
Instead of hand-rolling lookups, checking if rtentry is up, valid,
dealing with IPv6 mtu, finding "address" ifp (almost never done right),
provide easy-to-use API hiding all the complexity and returning the
needed info into small on-stack structure.

This change also helps hiding route subsystem internals (locking, direct
rtentry accesses).
Additionaly, using this API improves lookup performance since rtentry is not
locked.
(This is safe, since all the rtentry changes happens under both radix WLOCK
and rtentry WLOCK).

Sponsored by: Yandex LLC

show more ...