sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

Add 64bit statistic counters to the ng_ppp node.
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.

Approved by: re (rwatson), glebius (men

Add 64bit statistic counters to the ng_ppp node.
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.

Approved by: re (rwatson), glebius (mentor)

show more ...

Before this commit, if the compression is enabled the, ng_ppp(4)
node would send every outgoing frame to the "compress" hook.
Packets received on the "compress" hook were expected to be
compressed an

Before this commit, if the compression is enabled the, ng_ppp(4)
node would send every outgoing frame to the "compress" hook.
Packets received on the "compress" hook were expected to be
compressed and PROT_COMPD tag was put on them unconditionally.

After this commit an alternative compression mode can be set.
In this mode the node doesn't put the PROT_COMPD, the compressor
should put it itself. This is important for such kind of
compressors, that can submit uncompressed frames.

Before this commit, if the decompression is enabled, the ng_ppp(4)
node would send and incoming frame to the "decompress" hook
only if it has the PROT_COMPD proto tag on it.

After this commit an alternative decompression mode can be set.
In this mode the node sends all the incoming packets to the
decompression hook. This is important for such kind of compressors
that need uncompressed packets too, to keep their library in sync.

These new features will be used in new version of mpd4, and in new
compressor nodes.

Submitted by: Alexander Motin <mav alkar.net>

show more ...

Fix incorrect comment.

Submitted by: James Bowman <jamesb@acelere.net>

/* -> /*- for license, minor formatting changes

Use a single style of multiple inclusion protection for Netgraph headers.

Reviewed by: archie, harti, emax

Fix GCC warnings caused by initializing a zero length array. In the process,
simply things a bit by getting rid of 'struct ng_parse_struct_info' which
was useless because it only contained one field.

Fix GCC warnings caused by initializing a zero length array. In the process,
simply things a bit by getting rid of 'struct ng_parse_struct_info' which
was useless because it only contained one field.

MFC after: 2 weeks

show more ...

More complete fix for multi-link sequence number handling bugs.
Add a new control message for querying the sequence number state.

Take advantage of the new unsigned and hex integer types.

Fix broken multi-link fragment reassembly algorithm.
Add hook for IPv6. Misc cleanups.

PR: kern/16335

Add two new generic control messages, NGM_ASCII2BINARY and
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using

Add two new generic control messages, NGM_ASCII2BINARY and
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.

This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.

Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.

See /usr/share/examples/netgraph/ngctl for an example of using this.

Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.

Several other misc. bug fixes.

Reviewed by: julian

show more ...

Move handling of the address and control fields into the PPP node;
they belong there because they are device independent.
Also some other misc. fixes.

Fix several bugs found in the first bit of testing.

Revamped and more useful PPP node type, supporting multi-link PPP directly.
This is one piece of the grand unified PPP daemon concept, whereby using
netgraph nodes enables PPP data to be handled comp

Revamped and more useful PPP node type, supporting multi-link PPP directly.
This is one piece of the grand unified PPP daemon concept, whereby using
netgraph nodes enables PPP data to be handled completely in kernel land,
while leaving negotiation/control to be handled by a single user land
daemon, no matter what the link type(s).

This is a safety checkin only; it compiles, but is utterly untested.

Concept reviewed by: julian, brian

show more ...

Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://

Whistle's Netgraph link-layer (sometimes more) networking infrastructure.
Been in production for 3 years now. Gives Instant Frame relay to if_sr
and if_ar drivers, and PPPOE support soon. See:
ftp://ftp.whistle.com/pub/archie/netgraph/index.html
for on-line manual pages.

Reviewed by: Doug Rabson (dfr@freebsd.org)
Obtained from: Whistle CVS tree

show more ...

Add 64bit statistic counters to the ng_ppp node.
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.

Approved by: re (rwatson), glebius (men

Add 64bit statistic counters to the ng_ppp node.
64bit counters are needed to simplify traffic accounting and
reduce system load at the big PPP concentrators.

Approved by: re (rwatson), glebius (mentor)

show more ...

Before this commit, if the compression is enabled the, ng_ppp(4)
node would send every outgoing frame to the "compress" hook.
Packets received on the "compress" hook were expected to be
compressed an

Before this commit, if the compression is enabled the, ng_ppp(4)
node would send every outgoing frame to the "compress" hook.
Packets received on the "compress" hook were expected to be
compressed and PROT_COMPD tag was put on them unconditionally.

After this commit an alternative compression mode can be set.
In this mode the node doesn't put the PROT_COMPD, the compressor
should put it itself. This is important for such kind of
compressors, that can submit uncompressed frames.

Before this commit, if the decompression is enabled, the ng_ppp(4)
node would send and incoming frame to the "decompress" hook
only if it has the PROT_COMPD proto tag on it.

After this commit an alternative decompression mode can be set.
In this mode the node sends all the incoming packets to the
decompression hook. This is important for such kind of compressors
that need uncompressed packets too, to keep their library in sync.

These new features will be used in new version of mpd4, and in new
compressor nodes.

Submitted by: Alexander Motin <mav alkar.net>

show more ...

Fix incorrect comment.

Submitted by: James Bowman <jamesb@acelere.net>

/* -> /*- for license, minor formatting changes

Use a single style of multiple inclusion protection for Netgraph headers.

Reviewed by: archie, harti, emax

Fix GCC warnings caused by initializing a zero length array. In the process,
simply things a bit by getting rid of 'struct ng_parse_struct_info' which
was useless because it only contained one field.

Fix GCC warnings caused by initializing a zero length array. In the process,
simply things a bit by getting rid of 'struct ng_parse_struct_info' which
was useless because it only contained one field.

MFC after: 2 weeks

show more ...

More complete fix for multi-link sequence number handling bugs.
Add a new control message for querying the sequence number state.

Take advantage of the new unsigned and hex integer types.

Fix broken multi-link fragment reassembly algorithm.
Add hook for IPv6. Misc cleanups.

PR: kern/16335

Add two new generic control messages, NGM_ASCII2BINARY and
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using

Add two new generic control messages, NGM_ASCII2BINARY and
NGM_BINARY2ASCII, which convert control messages to ASCII and back.
This allows control messages to be sent and received in ASCII form
using ngctl(8), which makes ngctl a lot more useful.

This also allows all the type-specific debugging code in libnetgraph
to go away -- instead, we just ask the node itself to do the ASCII
translation for us.

Currently, all generic control messages are supported, as well as
messages associated with the following node types: async, cisco,
ksocket, and ppp.

See /usr/share/examples/netgraph/ngctl for an example of using this.

Also give ngctl(8) the ability to print out incoming data and
control messages at any time. Eventually nghook(8) may be subsumed.

Several other misc. bug fixes.

Reviewed by: julian

show more ...