ng_ubt(4): do not attach Realtek 87XX/88XX adaptors in bootloader mode.

Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it require

ng_ubt(4): do not attach Realtek 87XX/88XX adaptors in bootloader mode.

Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.

This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.

Sponsored by: Future Crew LLC
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D46738

show more ...

sys: Remove $FreeBSD$: one-line .h pattern

Remove /^\s*\*+\s*\$FreeBSD\$.*$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

ng_ubt: Remove unused devclass arguments to DRIVER_MODULE.

ng_ubt: Block attachment of uninitialized Intel Wireless 7265

As this controller requires firmware patch downloading to operate.
"Intel Wireless 7265" support in iwmbtfw(8) is yet to be done.

Teste

ng_ubt: Block attachment of uninitialized Intel Wireless 7265

As this controller requires firmware patch downloading to operate.
"Intel Wireless 7265" support in iwmbtfw(8) is yet to be done.

Tested by: arrowd et al
PR: 228787
MFC after: 2 weeks

show more ...

net: clean up empty lines in .c and .h files

ng_ubt(4): do not attach Intel Wireless 8260/8265 in bootloader mode.

Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of In

ng_ubt(4): do not attach Intel Wireless 8260/8265 in bootloader mode.

Add helper function for synchronous execution of HCI commands at probe
stage and use this function to check firmware state of Intel Wireless
8260/8265 bluetooth devices found in many post 2016 year laptops.

Attempt to initialize FreeBSD bluetooth stack while such a device is in
bootloader mode locks the adapter hardly so it requires power on/off
cycle to restore.

This change blocks ng_ubt attachment unless operational firmware is
loaded thus preventing the lock up.

PR: 237083
Reviewed by: hps, emax
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D21071

show more ...

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
pro

sys: general adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

No functional change intended.

show more ...

Merge from head

- Merge from HEAD

s/usb2_/usb_/ on all C structs for the USB stack.

move ng_ubt_var.h back to its original place

Dust off old code for support of USB isochronous transfers.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no

Dust off old code for support of USB isochronous transfers.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no visible changes unless the device is
broken (or really old).

MFC after: 3 months

show more ...

s/USBDEVNAME/device_get_nameunit/g
s/USBBASEDEVICE/device_t/g

more usb fallout changes

/* -> /*- for license, minor formatting changes

Get rid of device nodes interface. It is useless and confusing.
The original idea was to use it for firmware upgrading and similar
operations. In real life almost all Bluetooth USB devices do not
nee

Get rid of device nodes interface. It is useless and confusing.
The original idea was to use it for firmware upgrading and similar
operations. In real life almost all Bluetooth USB devices do not
need firmware download. If device does require firmware download
then ugen(4) (or specialized driver like ubtbcmfw(8)) should be
used instead.

MFC after: 3 days

show more ...

Do the dreaded s/dev_t/struct cdev */
Bump __FreeBSD_version accordingly.

Part one of undating the bluetooth code to the newest version

Submitted by: Maksim Yevmenkin <m_evmenkin@yahoo.com>
Approved by: re@

The second try a committing the bluetooth code
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.

We are still talking with 3com to try ge

The second try a committing the bluetooth code
Has been seen to work on several cards and communicating with
several mobile phones to use them as modems etc.

We are still talking with 3com to try get them to allow us to include
the firmware for their pccard in the driver but the driver is here..
In the mean time
it can be downloaded from the 3com website and loaded using the utility
bt3cfw(8) (supplied) (instructions in the man page)

Not yet linked to the build

Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>
Approved by: re

show more ...

- Merge from HEAD

s/usb2_/usb_/ on all C structs for the USB stack.

move ng_ubt_var.h back to its original place

Dust off old code for support of USB isochronous transfers.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no

Dust off old code for support of USB isochronous transfers.
USB isochronous transfer support is required for Bluetooth SCO.
While i'm here change u_int to uint and update TODO.
This should produce no visible changes unless the device is
broken (or really old).

MFC after: 3 months

show more ...

s/USBDEVNAME/device_get_nameunit/g
s/USBBASEDEVICE/device_t/g