| #
e9ac4169 |
| 15-Jul-2024 |
Warner Losh <imp@FreeBSD.org> |
Remove residual blank line at start of Makefile
This is a residual of the $FreeBSD$ removal.
MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix
|
|
Revision tags: release/14.1.0, release/13.3.0, release/14.0.0 |
|
| #
031beb4e |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line sh pattern
Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0 |
|
| #
7900bb16 |
| 07-Jul-2018 |
Ian Lepore <ian@FreeBSD.org> |
Set .PATH to dev/usb/serial so that these modules compile again.
|
|
Revision tags: release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
193d9e76 |
| 04-Mar-2017 |
Enji Cooper <ngie@FreeBSD.org> |
sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic
Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0 |
|
| #
a4aef7f9 |
| 29-Dec-2004 |
Warner Losh <imp@FreeBSD.org> |
We don't need to generate vnode_if.h anymore
|
|
Revision tags: release/5.3.0_cvs, release/5.3.0 |
|
| #
8985c52b |
| 05-Sep-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Device driver for the Cypress CY7C637xx and CY7C640/1xx families of USB
to RS232 bridges, such as the one found in the DeLorme Earthmate USB GPS
receiver (which is the only device currently supported
Device driver for the Cypress CY7C637xx and CY7C640/1xx families of USB
to RS232 bridges, such as the one found in the DeLorme Earthmate USB GPS
receiver (which is the only device currently supported by this driver).
While other USB to serial drivers in the tree rely heavily on ucom, this
one is self-contained. The reason for that is that ucom assumes that
the bridge uses bulk pipes for I/O, while the Cypress parts actually
register as human interface devices and use HID reports for configuration
and I/O.
The driver is not entirely complete: there is no support yet for flow
control, and output doesn't seem to work, though I don't know if that is
because of a bug in the code, or simply because the Earthmate is a read-
only device.
show more ...
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0 |
|
| #
a4aef7f9 |
| 29-Dec-2004 |
Warner Losh <imp@FreeBSD.org> |
We don't need to generate vnode_if.h anymore
|
|
Revision tags: release/5.3.0_cvs, release/5.3.0 |
|
| #
8985c52b |
| 05-Sep-2004 |
Dag-Erling Smørgrav <des@FreeBSD.org> |
Device driver for the Cypress CY7C637xx and CY7C640/1xx families of USB
to RS232 bridges, such as the one found in the DeLorme Earthmate USB GPS
receiver (which is the only device currently supported
Device driver for the Cypress CY7C637xx and CY7C640/1xx families of USB
to RS232 bridges, such as the one found in the DeLorme Earthmate USB GPS
receiver (which is the only device currently supported by this driver).
While other USB to serial drivers in the tree rely heavily on ucom, this
one is self-contained. The reason for that is that ucom assumes that
the bridge uses bulk pipes for I/O, while the Cypress parts actually
register as human interface devices and use HID reports for configuration
and I/O.
The driver is not entirely complete: there is no support yet for flow
control, and output doesn't seem to work, though I don't know if that is
because of a bug in the code, or simply because the Earthmate is a read-
only device.
show more ...
|