| #
e9ac4169 |
| 15-Jul-2024 |
Warner Losh <imp@FreeBSD.org> |
Remove residual blank line at start of Makefile
This is a residual of the $FreeBSD$ removal.
MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix
|
|
Revision tags: release/14.1.0, release/13.3.0, release/14.0.0 |
|
| #
031beb4e |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line sh pattern
Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0 |
|
| #
b111430e |
| 05-Apr-2022 |
Warner Losh <imp@FreeBSD.org> |
mii: Add opt_platform.h to all miibus drivers
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may
mii: Add opt_platform.h to all miibus drivers
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may not, strictly speaking, need it, it's easier to include it
universally for miibus.
Sponsored by: Netflix
show more ...
|
|
Revision tags: release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
193d9e76 |
| 04-Mar-2017 |
Enji Cooper <ngie@FreeBSD.org> |
sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic
Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0 |
|
| #
b6de9e91 |
| 27-Sep-2005 |
Max Laier <mlaier@FreeBSD.org> |
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
show more ...
|
|
Revision tags: release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
0fddbf87 |
| 06-Sep-2001 |
Brooks Davis <brooks@FreeBSD.org> |
vlan.h is obsolete, don't create it anymore.
|
| #
5da751e4 |
| 12-May-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Unbreak release. *sigh*
|
| #
ce4946da |
| 11-May-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost car
Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.
This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.
This driver should also work on the alpha. It's not turned on in
GENERIC.
show more ...
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0 |
|
| #
b6de9e91 |
| 27-Sep-2005 |
Max Laier <mlaier@FreeBSD.org> |
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
show more ...
|
|
Revision tags: release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
0fddbf87 |
| 06-Sep-2001 |
Brooks Davis <brooks@FreeBSD.org> |
vlan.h is obsolete, don't create it anymore.
|
| #
5da751e4 |
| 12-May-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Unbreak release. *sigh*
|
| #
ce4946da |
| 11-May-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost car
Add support for gigabit ethernet cards based on the NatSemi DP83820
and DP83821 gigabit ethernet MAC chips and the NatSemi DP83861 10/100/1000
copper PHY. There are a whole bunch of very low cost cards available with
this chipset selling for $150USD or less. This includes the SMC9462TX,
D-Link DGE-500T, Asante GigaNIX 1000TA and 1000TPC, and a couple cards
from Addtron.
This chip supports TCP/IP checksum offload, VLAN tagging/insertion.
2048-bit multicast filter, jumbograms and has 8K TX and 32K RX FIFOs.
I have not done serious performance testing with this driver. I know
it works, and I want it under CVS control so I can keep tabs on it.
Note that there's no serious mutex stuff in here yet either: I need
to talk more with jhb to figure out the right way to do this. That
said, I don't think there will be any problems.
This driver should also work on the alpha. It's not turned on in
GENERIC.
show more ...
|