Remove residual blank line at start of Makefile

This is a residual of the $FreeBSD$ removal.

MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix

sys: Remove $FreeBSD$: one-line sh pattern

Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/

bwn(4): Fix outstanding bug in PHY-G tssi2dbm table generation caught by
-Wconstant-conversion, and remove now unnecessary warning suppression
flags.

bwn(4): migrate bwn(4) to the native bhnd(9) interface, and drop siba_bwn.

- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with thei

bwn(4): migrate bwn(4) to the native bhnd(9) interface, and drop siba_bwn.

- Remove the shim interface that allowed bwn(4) to use either siba_bwn or
bhnd(4), replacing all siba_bwn calls with their bhnd(4) bus equivalents.
- Drop the legay, now-unused siba_bwn bus driver.
- Clean up bhnd(4) board flag defines referenced by bwn(4).

Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D13518

show more ...

Introduce bwn(4) support for the bhnd(4) bus.

Currently, bwn(4) relies on the siba_bwn(4) bus driver to provide support
for the on-chip SSB interconnect found in Broadcom's older PCI(e) Wi-Fi
adapte

Introduce bwn(4) support for the bhnd(4) bus.

Currently, bwn(4) relies on the siba_bwn(4) bus driver to provide support
for the on-chip SSB interconnect found in Broadcom's older PCI(e) Wi-Fi
adapters. Non-PCI Wi-Fi adapters, as well as the newer BCMA interconnect
found in post-2009 Broadcom Wi-Fi hardware, are not supported by
siba_bwn(4).

The bhnd(4) bus driver (also used by the FreeBSD/MIPS Broadcom port)
provides a unified kernel interface to a superset of the hardware supported
by siba_bwn; by attaching bwn(4) via bhnd(4), we can support both modern
PCI(e) Wi-Fi devices based on the BCMA backplane interconnect, as well as
Broadcom MIPS WiSoCs that include a D11 MAC core directly attached to their
SSB or BCMA backplane.

This diff introduces opt-in bwn(4) support for bhnd(4) by providing:

- A small bwn(4) driver subclass, if_bwn_bhnd, that attaches via
bhnd(4) instead of siba_bwn(4).
- A bhndb(4)-based PCI host bridge driver, if_bwn_pci, that optionally
probes at a higher priority than the siba_bwn(4) PCI driver.
- A set of compatibility shims that perform translation of bwn(4)'s
siba_bwn function calls into their bhnd(9) API equivalents when bwn(4)
is attached via a bhnd(4) bus parent. When bwn(4) is attached via
siba_bwn(4), all siba_bwn function calls are simply passed through to
their original implementations.

To test bwn(4) with bhnd(4), place the following lines in loader.conf(5):

hw.bwn_pci.preferred="1"

if_bwn_pci_load="YES
bwn_v4_ucode_load="YES"
bwn_v4_lp_ucode_load="YES"

To verify that bwn(4) is using bhnd(4), you can check dmesg:

bwn0: <Broadcom 802.11 MAC/PHY/Radio, rev 15> ... on bhnd0

... or devinfo(8):

pcib2
pci2
bwn_pci0
bhndb0
bhnd0
bwn0
...

bwn(4)/bhnd(4) has been tested for regressions with most chipsets currently
supported by bwn(4), including:

- BCM4312
- BCM4318
- BCM4321

With minimal changes to the DMA code (not included in this commit), I was
also able to test support for newer BCMA devices by bringing up basic
working Wi-Fi on two previously unsupported, BCMA-based N-PHY chipsets:

- BCM43224
- BCM43225

Approved by: adrian (mentor, implicit)
Sponsored by: The FreeBSD Foundation & Plausible Labs
Differential Revision: https://reviews.freebsd.org/D13041

show more ...

sys/modules: normalize .CURDIR-relative paths to SRCTOP

This simplifies make output/logic

Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon

Merge ^/head r306906 through r307382.

Properly include the 802.11n PHY support files when the BWM_GPL_PHY
option is included. Remove the comment suggesting that people
uncomment things because it is OBE.

Merge ^/head r305390 through r305393.

Make some additional -Wconstant-conversion warnings from clang 3.9.0 in
bwn(4) non-fatal for now.

bwn, bwn_pci, siba_bwn: add missing opt_*.h dependencies.

[bwn] add in bwn n-phy linking.

* The default kernel and options won't build the GPL PHY bits;
* bwn(4) defaults to building as a module anyway!;
* If BWN_GPL_PHY is specified in the config file, an

[bwn] add in bwn n-phy linking.

* The default kernel and options won't build the GPL PHY bits;
* bwn(4) defaults to building as a module anyway!;
* If BWN_GPL_PHY is specified in the config file, and you uncomment
the GPL PHY bits in the module Makefile, you'll get a working
N-PHY.

This is specifically designed to be obtuse for now, as I don't want
to flip it on by default. It's easy enough for people to flip on
and build, and it's a module so the default GENERIC kernel won't be
GPL tainted.

I'll have to add an actual HAL layer that allows the GPL PHY to be loaded
before if_bwn so it can be "magic", but that'll come later.

Tested:

* BCM4321 11abg NIC, STA mode

show more ...

[bwn] add in the new phy common and utils files.

They're not yet used by included code; that'll come next.

[bwn] break out the 'g' phy code into a separate source file.

* Break out the 'g' phy code;
* Break out the debugging bits into a separate source file, since
some debugging prints are done in the

[bwn] break out the 'g' phy code into a separate source file.

* Break out the 'g' phy code;
* Break out the debugging bits into a separate source file, since
some debugging prints are done in the phy code;
* Make some more chip methods in if_bwn.c public.

This brings the size of if_bwn.c down to 6,805 lines which is now
approaching managable.

show more ...

[bwn] break out the LP PHY code into a separate file.

This (and eventually migrating the other PHY code out) is in preparation
for adding the 11n PHY. No, the 11ac PHY (for the BCM4260 softmac part

[bwn] break out the LP PHY code into a separate file.

This (and eventually migrating the other PHY code out) is in preparation
for adding the 11n PHY. No, the 11ac PHY (for the BCM4260 softmac part) isn't
yet open source, so we can't grow that. Yet.

This trims ~3,700 lines of code from if_bwn.c, bringing it down to a slightly
less crazy sounding 10,446 lines of code.

show more ...

Merge sync of head

MFhead @ r277403

Reintegrate head: r274132-r277384

Sponsored by: The FreeBSD Foundation

Reintegrate head revisions r273096-r277147

Sponsored by: The FreeBSD Foundation

Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support
CWARNFALGS.$file centrally so we don't have to have it in all the
places. Remove a few warning flags that are no longer needed.

Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support
CWARNFALGS.$file centrally so we don't have to have it in all the
places. Remove a few warning flags that are no longer needed.
Also, always use -Wno-unknown-pragma to (hopefully temporarily) work
around #pragma ident in debug.h in the opensolaris code. Remove some
stale warning suppression that's no longer necessary.

show more ...

MFC @ r241285

IFC @ r242684

Sync from head

Merge head r233826 through r240095.

Upgrade our copy of llvm/clang to trunk r162107. With thanks to
Benjamin Kramer and Joerg Sonnenberger for their input and fixes.