| #
e9ac4169 |
| 15-Jul-2024 |
Warner Losh <imp@FreeBSD.org> |
Remove residual blank line at start of Makefile
This is a residual of the $FreeBSD$ removal.
MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix
|
|
Revision tags: release/14.1.0, release/13.3.0, release/14.0.0 |
|
| #
031beb4e |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line sh pattern
Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0 |
|
| #
b111430e |
| 05-Apr-2022 |
Warner Losh <imp@FreeBSD.org> |
mii: Add opt_platform.h to all miibus drivers
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may
mii: Add opt_platform.h to all miibus drivers
miivar.h includes opt_platform.h. Make sure all the drivers that use the
miibus_if.h interface file have opt_platform.h as well. While some of
these may not, strictly speaking, need it, it's easier to include it
universally for miibus.
Sponsored by: Netflix
show more ...
|
|
Revision tags: release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0 |
|
| #
bc02c18c |
| 07-Feb-2020 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r357408 through r357661.
|
| #
58aa35d4 |
| 03-Feb-2020 |
Warner Losh <imp@FreeBSD.org> |
Remove sparc64 kernel support
Remove all sparc64 specific files
Remove all sparc64 ifdefs
Removee indireeect sparc64 ifdefs
|
|
Revision tags: release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
193d9e76 |
| 04-Mar-2017 |
Enji Cooper <ngie@FreeBSD.org> |
sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic
Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0 |
|
| #
6f3544cd |
| 26-Oct-2010 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Merge svn+ssh://svn.freebsd.org/base/head@214309
|
| #
c09808d0 |
| 23-Aug-2010 |
Warner Losh <imp@FreeBSD.org> |
MFtbemd:
Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the
source code location of the machine, the latter the binary output. In
general, we want to use MACHINE_CPUARCH instead
MFtbemd:
Use MACHINE_CPUARCH in preference to MACHINE_ARCH. The former is the
source code location of the machine, the latter the binary output. In
general, we want to use MACHINE_CPUARCH instead of MACHINE_ARCH unless
we're tesitng for a specific target. The isn't even moot for
i386/amd64 where there's momemntum towards a MACHINE_CPUARCH == x86,
although a specific cleanup for that likely would be needed...
show more ...
|
|
Revision tags: release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0 |
|
| #
3c7e4206 |
| 10-Jun-2007 |
Ken Smith <kensmith@FreeBSD.org> |
Add ofw_bus_if.h as a dependency on sparc64. Without this sparc64 kernel
builds had been succeeding if run serially but could fail if run in
parallel because the bge module build might start before
Add ofw_bus_if.h as a dependency on sparc64. Without this sparc64 kernel
builds had been succeeding if run serially but could fail if run in
parallel because the bge module build might start before ofw_bus_if.h
got created as part of the mainline kernel build.
Diagnosis and patch by: ru
show more ...
|
|
Revision tags: release/6.2.0_cvs, release/6.2.0 |
|
| #
add72477 |
| 03-Nov-2006 |
Ruslan Ermilov <ru@FreeBSD.org> |
Remove no longer existing opt_bdg.h and opt_bge.h.
|
|
Revision tags: release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0 |
|
| #
b6de9e91 |
| 27-Sep-2005 |
Max Laier <mlaier@FreeBSD.org> |
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
show more ...
|
| #
ff50922b |
| 24-Jun-2005 |
Doug White <dwhite@FreeBSD.org> |
Backout the change I made before 5.4-R since I wasn't aware that it was only
a problem with one particular switch module. Create a kernel option
BGE_FAKE_AUTONEG that restores the 5.4 behavior, whic
Backout the change I made before 5.4-R since I wasn't aware that it was only
a problem with one particular switch module. Create a kernel option
BGE_FAKE_AUTONEG that restores the 5.4 behavior, which should make the DNLK
switch module work. IBM/Intel blades with Intel or AD switch modules should
work without patching or kernel options with this commit.
Hardware for testing provided by several folks, including
Danny Braniss <danny@cs.huji.ac.il>, Achim Patzner <ap@bnc.net>,
and OffMyServer.
Approved by: re
show more ...
|
|
Revision tags: release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0 |
|
| #
2d3ce713 |
| 19-Jan-2003 |
David E. O'Brien <obrien@FreeBSD.org> |
Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
|
|
Revision tags: release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
95d67482 |
| 28-Sep-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Add device driver support for the Broadcom BCM570x family of gigabit
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
De
Add device driver support for the Broadcom BCM570x family of gigabit
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
show more ...
|
|
Revision tags: release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0 |
|
| #
3c7e4206 |
| 10-Jun-2007 |
Ken Smith <kensmith@FreeBSD.org> |
Add ofw_bus_if.h as a dependency on sparc64. Without this sparc64 kernel
builds had been succeeding if run serially but could fail if run in
parallel because the bge module build might start before
Add ofw_bus_if.h as a dependency on sparc64. Without this sparc64 kernel
builds had been succeeding if run serially but could fail if run in
parallel because the bge module build might start before ofw_bus_if.h
got created as part of the mainline kernel build.
Diagnosis and patch by: ru
show more ...
|
|
Revision tags: release/6.2.0_cvs, release/6.2.0 |
|
| #
add72477 |
| 03-Nov-2006 |
Ruslan Ermilov <ru@FreeBSD.org> |
Remove no longer existing opt_bdg.h and opt_bge.h.
|
|
Revision tags: release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0 |
|
| #
b6de9e91 |
| 27-Sep-2005 |
Max Laier <mlaier@FreeBSD.org> |
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG
Remove bridge(4) from the tree. if_bridge(4) is a full functional
replacement and has additional features which make it superior.
Discussed on: -arch
Reviewed by: thompsa
X-MFC-after: never (RELENG_6 as transition period)
show more ...
|
| #
ff50922b |
| 24-Jun-2005 |
Doug White <dwhite@FreeBSD.org> |
Backout the change I made before 5.4-R since I wasn't aware that it was only
a problem with one particular switch module. Create a kernel option
BGE_FAKE_AUTONEG that restores the 5.4 behavior, whic
Backout the change I made before 5.4-R since I wasn't aware that it was only
a problem with one particular switch module. Create a kernel option
BGE_FAKE_AUTONEG that restores the 5.4 behavior, which should make the DNLK
switch module work. IBM/Intel blades with Intel or AD switch modules should
work without patching or kernel options with this commit.
Hardware for testing provided by several folks, including
Danny Braniss <danny@cs.huji.ac.il>, Achim Patzner <ap@bnc.net>,
and OffMyServer.
Approved by: re
show more ...
|
|
Revision tags: release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0 |
|
| #
2d3ce713 |
| 19-Jan-2003 |
David E. O'Brien <obrien@FreeBSD.org> |
Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.
|
|
Revision tags: release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
95d67482 |
| 28-Sep-2001 |
Bill Paul <wpaul@FreeBSD.org> |
Add device driver support for the Broadcom BCM570x family of gigabit
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
De
Add device driver support for the Broadcom BCM570x family of gigabit
ethernet controllers. This adds support for the 3Com 3c996-T, the
SysKonnect SK-9D21 and SK-9D41, and the built-in gigE NICs on
Dell PowerEdge 2550 servers. The latter configuration hauls ass:
preliminary measurements show TCP speeds of over 900Mbps using
only normal size frames.
TCP/IP checksum offload, jumbo frames and VLAN tag insertion/stripping
are supported, as well as interrupt moderation.
Still need to fix autonegotiation support for 1000baseSX NICs, but
beyond that, driver is pretty solid.
show more ...
|