| #
e9ac4169 |
| 15-Jul-2024 |
Warner Losh <imp@FreeBSD.org> |
Remove residual blank line at start of Makefile
This is a residual of the $FreeBSD$ removal.
MFC After: 3 days (though I'll just run the command on the branches)
Sponsored by: Netflix
|
|
Revision tags: release/14.1.0, release/13.3.0, release/14.0.0 |
|
| #
031beb4e |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line sh pattern
Remove /^\s*#[#!]?\s*\$FreeBSD\$.*$\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0, release/10.4.0, release/11.1.0 |
|
| #
193d9e76 |
| 04-Mar-2017 |
Enji Cooper <ngie@FreeBSD.org> |
sys/modules: normalize .CURDIR-relative paths to SRCTOP
This simplifies make output/logic
Tested with: `cd sys/modules; make ALL_MODULES=` on amd64
MFC after: 1 month
Sponsored by: Dell EMC Isilon
|
|
Revision tags: release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0 |
|
| #
98e0ffae |
| 27-May-2015 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge sync of head
|
| #
51dd214c |
| 19-Jan-2015 |
Enji Cooper <ngie@FreeBSD.org> |
MFhead @ r277403
|
| #
d899be7d |
| 19-Jan-2015 |
Glen Barber <gjb@FreeBSD.org> |
Reintegrate head: r274132-r277384
Sponsored by: The FreeBSD Foundation
|
| #
8f0ea33f |
| 13-Jan-2015 |
Glen Barber <gjb@FreeBSD.org> |
Reintegrate head revisions r273096-r277147
Sponsored by: The FreeBSD Foundation
|
| #
4906cdc8 |
| 03-Jan-2015 |
Warner Losh <imp@FreeBSD.org> |
Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support
CWARNFALGS.$file centrally so we don't have to have it in all the
places. Remove a few warning flags that are no longer needed.
Re-support CWARNFLAGS, lost when bsd.sys.mk was removed. Also, support
CWARNFALGS.$file centrally so we don't have to have it in all the
places. Remove a few warning flags that are no longer needed.
Also, always use -Wno-unknown-pragma to (hopefully temporarily) work
around #pragma ident in debug.h in the opensolaris code. Remove some
stale warning suppression that's no longer necessary.
show more ...
|
|
Revision tags: release/10.1.0, release/9.3.0 |
|
| #
6cec9cad |
| 03-Jun-2014 |
Peter Grehan <grehan@FreeBSD.org> |
MFC @ r266724
An SVM update will follow this.
|
| #
3b8f0845 |
| 28-Apr-2014 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge head
|
| #
84e51a1b |
| 23-Apr-2014 |
Alan Somers <asomers@FreeBSD.org> |
IFC @264767
|
| #
5748b897 |
| 19-Feb-2014 |
Martin Matuska <mm@FreeBSD.org> |
Merge head up to r262222 (last merge was incomplete).
|
|
Revision tags: release/10.0.0 |
|
| #
e01ff621 |
| 09-Jan-2014 |
Glen Barber <gjb@FreeBSD.org> |
MFH: tracking commit (head@r260486)
Sponsored by: The FreeBSD Foundation
|
| #
50b464aa |
| 07-Jan-2014 |
Scott Long <scottl@FreeBSD.org> |
Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled
Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm. If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.
This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
show more ...
|
|
Revision tags: release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0 |
|
| #
8fa0b743 |
| 23-Jan-2012 |
Xin LI <delphij@FreeBSD.org> |
IFC @230489 (pending review).
|
| #
80dbff4e |
| 04-Jan-2012 |
Sean Bruno <sbruno@FreeBSD.org> |
IFC to head to catch up the bhyve branch
Approved by: grehan@
|
|
Revision tags: release/9.0.0 |
|
| #
40c56173 |
| 22-Dec-2011 |
Dimitry Andric <dim@FreeBSD.org> |
Disable -Wconstant-conversion warnings for the aic7xxx module in a more
fine-grained way: only add the option for the specific .c files that
need them, like via sys/conf/files.
MFC after: 1 week
|
| #
ff0dd2e5 |
| 21-Dec-2011 |
Dimitry Andric <dim@FreeBSD.org> |
Amend r228779 by also disabling -Wconstant-conversion warnings for the
aic7xxx module.
MFC after: 1 week
|
|
Revision tags: release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2 |
|
| #
0d74300c |
| 01-Aug-2002 |
Scott Long <scottl@FreeBSD.org> |
Allow the ahc and ahd drivers to be built as modules. This also
breaks the ahc driver into a core back-end and pci and eisa
front-ends.
|
|
Revision tags: release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0, release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0, release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2 |
|
| #
0d74300c |
| 01-Aug-2002 |
Scott Long <scottl@FreeBSD.org> |
Allow the ahc and ahd drivers to be built as modules. This also
breaks the ahc driver into a core back-end and pci and eisa
front-ends.
|