sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl s

sys: Remove ancient SCCS tags.

Remove ancient SCCS tags from the tree, automated scripting, with two
minor fixup to keep things compiling. All the common forms in the tree
were removed with a perl script.

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

libkern: Fix a typo in a source code comment

- s/involes/involves/

Obtained from: NetBSD
MFC after: 3 days

Merge ^/head r325999 through r326131.

sys: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for

sys: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

show more ...

Merge ^/head r325842 through r325998.

ANSIfy sys/libkern

PR: 223641
Submitted by: ota@j.email.ne.jp
MFC after: 1 week

Merge ^/head r314420 through r314481.

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is

Renumber copyright clause 4

Renumber cluase 4 to 3, per what everybody else did when BSD granted
them permission to remove clause 3. My insistance on keeping the same
numbering for legal reasons is too pedantic, so give up on that point.

Submitted by: Jan Schaumann <jschauma@stevens.edu>
Pull Request: https://github.com/freebsd/freebsd/pull/96

show more ...

Merge ^/head r311940 through r312200.

libkern: Remove obsolete 'register' keyword

Sponsored by: Dell EMC Isilon

/* -> /*- for copyright notices, minor format tweaks as necessary

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

Use __FBSDID().

Remove bogus include of <machine/ansi.h>.

Remove __P.

Fix a warning in bsearch(). Like index() etc, it de-qualifies its
arguments. Caveat Emptor. However, the only two consumer of it (cam)
deals with it correctly and preserves the constness.

A set of changes to reduce the number of include files the kernel
takes from /usr/include. I cannot check them on alpha.. (will try beast)

Briefly looked at by: Warner Losh <imp@harmony.village.org>

Rewrite of the CAM error recovery code.

Some of the major changes include:

- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better

Rewrite of the CAM error recovery code.

Some of the major changes include:

- The SCSI error handling portion of cam_periph_error() has
been broken out into a number of subfunctions to better
modularize the code that handles the hierarchy of SCSI errors.
As a result, the code is now much easier to read.

- String handling and error printing has been significantly
revamped. We now use sbufs to do string formatting instead
of using printfs (for the kernel) and snprintf/strncat (for
userland) as before.

There is a new catchall error printing routine,
cam_error_print() and its string-based counterpart,
cam_error_string() that allow the kernel and userland
applications to pass in a CCB and have errors printed out
properly, whether or not they're SCSI errors. Among other
things, this helped eliminate a fair amount of duplicate code
in camcontrol.

We now print out more information than before, including
the CAM status and SCSI status and the error recovery action
taken to remedy the problem.

- sbufs are now available in userland, via libsbuf. This
change was necessary since most of the error printing code
is shared between libcam and the kernel.

- A new transfer settings interface is included in this checkin.
This code is #ifdef'ed out, and is primarily intended to aid
discussion with HBA driver authors on the final form the
interface should take. There is example code in the ahc(4)
driver that implements the HBA driver side of the new
interface. The new transfer settings code won't be enabled
until we're ready to switch all HBA drivers over to the new
interface.

src/Makefile.inc1,
lib/Makefile: Add libsbuf. It must be built before libcam,
since libcam uses sbuf routines.

libcam/Makefile: libcam now depends on libsbuf.

libsbuf/Makefile: Add a makefile for libsbuf. This pulls in the
sbuf sources from sys/kern.

bsd.libnames.mk: Add LIBSBUF.

camcontrol/Makefile: Add -lsbuf. Since camcontrol is statically
linked, we can't depend on the dynamic linker
to pull in libsbuf.

camcontrol.c: Use cam_error_print() instead of checking for
CAM_SCSI_STATUS_ERROR on every failed CCB.

sbuf.9: Change the prototypes for sbuf_cat() and
sbuf_cpy() so that the source string is now a
const char *. This is more in line wth the
standard system string functions, and helps
eliminate warnings when dealing with a const
source buffer.

Fix a typo.

cam.c: Add description strings for the various CAM
error status values, as well as routines to
look up those strings.

Add new cam_error_string() and
cam_error_print() routines for userland and
the kernel.

cam.h: Add a new CAM flag, CAM_RETRY_SELTO.

Add enumerated types for the various options
available with cam_error_print() and
cam_error_string().

cam_ccb.h: Add new transfer negotiation structures/types.

Change inq_len in the ccb_getdev structure to
be "reserved". This field has never been
filled in, and will be removed when we next
bump the CAM version.

cam_debug.h: Fix typo.

cam_periph.c: Modularize cam_periph_error(). The SCSI error
handling part of cam_periph_error() is now
in camperiphscsistatuserror() and
camperiphscsisenseerror().

In cam_periph_lock(), increase the reference
count on the periph while we wait for our lock
attempt to succeed so that the periph won't go
away while we're sleeping.

cam_xpt.c: Add new transfer negotiation code. (ifdefed
out)

Add a new function, xpt_path_string(). This
is a string/sbuf analog to xpt_print_path().

scsi_all.c: Revamp string handing and error printing code.
We now use sbufs for much of the string
formatting code. More of that code is shared
between userland the kernel.

scsi_all.h: Get rid of SS_TURSTART, it wasn't terribly
useful in the first place.

Add a new error action, SS_REQSENSE. (Send a
request sense and then retry the command.)
This is useful when the controller hasn't
performed autosense for some reason.

Change the default actions around a bit.

scsi_cd.c,
scsi_da.c,
scsi_pt.c,
scsi_ses.c: SF_RETRY_SELTO -> CAM_RETRY_SELTO. Selection
timeouts shouldn't be covered by a sense flag.

scsi_pass.[ch]: SF_RETRY_SELTO -> CAM_RETRY_SELTO.

Get rid of the last vestiges of a read/write
interface.

libkern/bsearch.c,
sys/libkern.h,
conf/files: Add bsearch.c, which is needed for some of the
new table lookup routines.

aic7xxx_freebsd.c: Define AHC_NEW_TRAN_SETTINGS if
CAM_NEW_TRAN_CODE is defined.

sbuf.h,
subr_sbuf.c: Add the appropriate #ifdefs so sbufs can
compile and run in userland.

Change sbuf_printf() to use vsnprintf()
instead of kvprintf(), which is only available
in the kernel.

Change the source string for sbuf_cpy() and
sbuf_cat() to be a const char *.

Add __BEGIN_DECLS and __END_DECLS around
function prototypes since they're now exported
to userland.

kdump/mkioctls: Include stdio.h before cam.h since cam.h now
includes a function with a FILE * argument.

Submitted by: gibbs (mostly)
Reviewed by: jdp, marcel (libsbuf makefile changes)
Reviewed by: des (sbuf changes)
Reviewed by: ken

show more ...

/* -> /*- for copyright notices, minor format tweaks as necessary

Remove advertising clause from University of California Regent's
license, per letter dated July 22, 1999 and email from Peter Wemm,
Alan Cox and Robert Watson.

Approved by: core, peter, alc, rwatson

Use __FBSDID().

Remove bogus include of <machine/ansi.h>.

Remove __P.