sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

sglist: Add sglist_append_single_mbuf().

This function appends the contents of a single mbuf to an sglist
rather than an entire mbuf chain.

Reviewed by: gallatin, markj
Sponsored by: Netflix
Differ

sglist: Add sglist_append_single_mbuf().

This function appends the contents of a single mbuf to an sglist
rather than an entire mbuf chain.

Reviewed by: gallatin, markj
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D30135

show more ...

Step 4.2: start divorce of M_EXT and M_EXTPG

They have more differencies than similarities. For now there is lots
of code that would check for M_EXT only and work correctly on M_EXTPG
buffers, so st

Step 4.2: start divorce of M_EXT and M_EXTPG

They have more differencies than similarities. For now there is lots
of code that would check for M_EXT only and work correctly on M_EXTPG
buffers, so still carry M_EXT bit together with M_EXTPG. However,
prepare some code for explicit check for M_EXTPG.

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

show more ...

Mechanically rename MBUF_EXT_PGS_ASSERT() to M_ASSERTEXTPG() to match
classical M_ASSERTPKTHDR.

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

Step 4.1: mechanically rename M_NOMAP to M_EXTPG

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

Step 3: anonymize struct mbuf_ext_pgs and move all its fields into mbuf
within m_epg namespace.
All edits except the 'struct mbuf' declaration and mb_dupcl() were done
mechanically with sed:

Step 3: anonymize struct mbuf_ext_pgs and move all its fields into mbuf
within m_epg namespace.
All edits except the 'struct mbuf' declaration and mb_dupcl() were done
mechanically with sed:

s/->m_ext_pgs.nrdy/->m_epg_nrdy/g
s/->m_ext_pgs.hdr_len/->m_epg_hdrlen/g
s/->m_ext_pgs.trail_len/->m_epg_trllen/g
s/->m_ext_pgs.first_pg_off/->m_epg_1st_off/g
s/->m_ext_pgs.last_pg_len/->m_epg_last_len/g
s/->m_ext_pgs.flags/->m_epg_flags/g
s/->m_ext_pgs.record_type/->m_epg_record_type/g
s/->m_ext_pgs.enc_cnt/->m_epg_enc_cnt/g
s/->m_ext_pgs.tls/->m_epg_tls/g
s/->m_ext_pgs.so/->m_epg_so/g
s/->m_ext_pgs.seqno/->m_epg_seqno/g
s/->m_ext_pgs.stailq/->m_epg_stailq/g

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

show more ...

Step 2.3: Rename mbuf_ext_pg_len() to m_epg_pagelen() that
uses mbuf argument.

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

Step 2.2:
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching

Step 2.2:
o Shrink sglist(9) functions to work with multipage mbufs down from
four functions to two.
o Don't use 'struct mbuf_ext_pgs *' as argument, use struct mbuf.
o Rename to something matching _epg.

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

show more ...

Continuation of multi page mbuf redesign from r359919.

The following series of patches addresses three things:

Now that array of pages is embedded into mbuf, we no longer need
separate structure to

Continuation of multi page mbuf redesign from r359919.

The following series of patches addresses three things:

Now that array of pages is embedded into mbuf, we no longer need
separate structure to pass around, so struct mbuf_ext_pgs is an
artifact of the first implementation. And struct mbuf_ext_pgs_data
is a crutch to accomodate the main idea r359919 with minimal churn.

Also, M_EXT of type EXT_PGS are just a synonym of M_NOMAP.

The namespace for the newfeature is somewhat inconsistent and
sometimes has a lengthy prefixes. In these patches we will
gradually bring the namespace to "m_epg" prefix for all mbuf
fields and most functions.

Step 1 of 4:

o Anonymize mbuf_ext_pgs_data, embed in m_ext
o Embed mbuf_ext_pgs
o Start documenting all this entanglement

Reviewed by: gallatin
Differential Revision: https://reviews.freebsd.org/D24598

show more ...

KTLS: Re-work unmapped mbufs to carry ext_pgs in the mbuf itself.

While the original implementation of unmapped mbufs was a large
step forward in terms of reducing cache misses by enabling mbufs
to

KTLS: Re-work unmapped mbufs to carry ext_pgs in the mbuf itself.

While the original implementation of unmapped mbufs was a large
step forward in terms of reducing cache misses by enabling mbufs
to carry more than a single page for sendfile, they are rather
cache unfriendly when accessing the ext_pgs metadata and
data. This is because the ext_pgs part of the mbuf is allocated
separately, and almost guaranteed to be cold in cache.

This change takes advantage of the fact that unmapped mbufs
are never used at the same time as pkthdr mbufs. Given this
fact, we can overlap the ext_pgs metadata with the mbuf
pkthdr, and carry the ext_pgs meta directly in the mbuf itself.
Similarly, we can carry the ext_pgs data (TLS hdr/trailer/array
of pages) directly after the existing m_ext.

In order to be able to carry 5 pages (which is the minimum
required for a 16K TLS record which is not perfectly aligned) on
LP64, I've had to steal ext_arg2. The only user of this in the
xmit path is sendfile, and I've adjusted it to use arg1 when
using unmapped mbufs.

This change is almost entirely mechanical, except that we
change mb_alloc_ext_pgs() to no longer allow allocating
pkthdrs, the change to avoid ext_arg2 as mentioned above,
and the removal of the ext_pgs zone,

This change saves roughly 2% "raw" CPU (~59% -> 57%), or over
3% "scaled" CPU on a Netflix 100% software kTLS workload at
90+ Gb/s on Broadwell Xeons.

In a follow-on commit, I plan to remove some hacks to avoid
access ext_pgs fields of mbufs, since they will now be in
cache.

Many thanks to glebius for helping to make this better in
the Netflix tree.

Reviewed by: hselasky, jhb, rrs, glebius (early version)
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D24213

show more ...

MFHead @r350386

Sponsored by: The FreeBSD Foundation

Add an external mbuf buffer type that holds multiple unmapped pages.

Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement

Add an external mbuf buffer type that holds multiple unmapped pages.

Unmapped mbufs allow sendfile to carry multiple pages of data in a
single mbuf, without mapping those pages. It is a requirement for
Netflix's in-kernel TLS, and provides a 5-10% CPU savings on heavy web
serving workloads when used by sendfile, due to effectively
compressing socket buffers by an order of magnitude, and hence
reducing cache misses.

For this new external mbuf buffer type (EXT_PGS), the ext_buf pointer
now points to a struct mbuf_ext_pgs structure instead of a data
buffer. This structure contains an array of physical addresses (this
reduces cache misses compared to an earlier version that stored an
array of vm_page_t pointers). It also stores additional fields needed
for in-kernel TLS such as the TLS header and trailer data that are
currently unused. To more easily detect these mbufs, the M_NOMAP flag
is set in m_flags in addition to M_EXT.

Various functions like m_copydata() have been updated to safely access
packet contents (using uiomove_fromphys()), to make things like BPF
safe.

NIC drivers advertise support for unmapped mbufs on transmit via a new
IFCAP_NOMAP capability. This capability can be toggled via the new
'nomap' and '-nomap' ifconfig(8) commands. For NIC drivers that only
transmit packet contents via DMA and use bus_dma, adding the
capability to if_capabilities and if_capenable should be all that is
required.

If a NIC does not support unmapped mbufs, they are converted to a
chain of mapped mbufs (using sf_bufs to provide the mapping) in
ip_output or ip6_output. If an unmapped mbuf requires software
checksums, it is also converted to a chain of mapped mbufs before
computing the checksum.

Submitted by: gallatin (earlier version)
Reviewed by: gallatin, hselasky, rrs
Discussed with: ae, kp (firewalls)
Relnotes: yes
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D20616

show more ...

Merge ^/head r325999 through r326131.

sys: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for

sys: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 3-Clause license.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

show more ...

Merge ^/head r318380 through r318559.

Add sglist_append_sglist().

This function permits a range of one scatter/gather list to be appended to
another sglist. This can be used to construct a scatter/gather list that
reorders or duplicate

Add sglist_append_sglist().

This function permits a range of one scatter/gather list to be appended to
another sglist. This can be used to construct a scatter/gather list that
reorders or duplicates ranges from one or more existing scatter/gather
lists.

Sponsored by: Chelsio Communications

show more ...

Add sglist functions for working with arrays of VM pages.

sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
ad

Add sglist functions for working with arrays of VM pages.

sglist_count_vmpages() determines the number of segments required for
a buffer described by an array of VM pages. sglist_append_vmpages()
adds the segments described by such a buffer to an sglist. The latter
function is largely pulled from sglist_append_bio(), and
sglist_append_bio() now uses sglist_append_vmpages().

Reviewed by: kib
Sponsored by: Chelsio Communications

show more ...

Merge sync of head

Merge from HEAD

Merge ^/head r277719 through 277776.

Fix a couple of panics when detaching from a cxgbe/cxl interface that was
never brought up:
- Allow NULL to be passed to sglist_free().
- Don't try to stop an interface that was never fully initializ

Fix a couple of panics when detaching from a cxgbe/cxl interface that was
never brought up:
- Allow NULL to be passed to sglist_free().
- Don't try to stop an interface that was never fully initialized.

Reviewed by: np

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767