sys: Remove $FreeBSD$: two-line .h pattern

Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

msgbuf: Allow microsecond granularity timestamps

Today, kern.msgbuf_show_timestamp=1 will give 1 second granularity
timestamps on dmesg lines. When kern.msgbuf_show_timestamp=2, we'll
produce micros

msgbuf: Allow microsecond granularity timestamps

Today, kern.msgbuf_show_timestamp=1 will give 1 second granularity
timestamps on dmesg lines. When kern.msgbuf_show_timestamp=2, we'll
produce microsecond level graunlarity.
For example:
old (== 1):
[13] Dual Console: Video Primary, Serial Secondary
[14] lo0: link state changed to UP
[15] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
[15] bxe0: link state changed to UP
new (== 2):
[13.807015] Dual Console: Video Primary, Serial Secondary
[14.544150] lo0: link state changed to UP
[15.272044] bxe0: NIC Link is Up, 10000 Mbps full duplex, Flow control: ON - receive & transmit
[15.272052] bxe0: link state changed to UP

Sponsored by: Netflix

show more ...

Make msgbuf_peekbytes() not return leading zeroes.

Introduce new MSGBUF_WRAP flag, indicating that buffer has wrapped
at least once and does not keep zeroes from the last msgbuf_clear().
It allows m

Make msgbuf_peekbytes() not return leading zeroes.

Introduce new MSGBUF_WRAP flag, indicating that buffer has wrapped
at least once and does not keep zeroes from the last msgbuf_clear().
It allows msgbuf_peekbytes() to return only real data, not requiring
every consumer to trim the leading zeroes after doing pointless copy.
The most visible effect is that kern.msgbuf sysctl now always returns
proper zero-terminated string, not only after the first buffer wrap.

MFC after: 1 week
Sponsored by: iXsystems, Inc.

show more ...

Allow minidumps to be performed on the live system

Add a boolean parameter to minidumpsys(), to indicate a live dump. When
requested, take a snapshot of important global state, and pass this to
the

Allow minidumps to be performed on the live system

Add a boolean parameter to minidumpsys(), to indicate a live dump. When
requested, take a snapshot of important global state, and pass this to
the machine-dependent minidump function. For now this includes the
kernel message buffer, and the bitset of pages to be dumped. Beyond
this, we don't take much action to protect the integrity of the dump
from changes in the running system.

A new function msgbuf_duplicate() is added for snapshotting the message
buffer. msgbuf_copy() is insufficient for this purpose since it marks
any new characters it finds as read.

For now, nothing can actually trigger a live minidump. A future patch
will add the mechanism for this. For simplicity and safety, live dumps
are disallowed for mips.

Reviewed by: markj, jhb
MFC after: 2 weeks
Sponsored by: Juniper Networks, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D31993

show more ...

kern: clean up empty lines in .c and .h files

MFH @ r337607, in preparation for boarding

Merge ^/head r337286 through r337585.

msgbuf: Light detailing (const'ify and bool'itize)

Merge ^/head r327169 through r327340.

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(

Do pass removing some write-only variables from the kernel.

This reduces noise when kernel is compiled by newer GCC versions,
such as one used by external toolchain ports.

Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial)
Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c)
Differential Revision: https://reviews.freebsd.org/D10385

show more ...

sys/kern: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone

sys/kern: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

sys/kern: spelling fixes in comments.

No functional change.

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Merge head from 7/28

Sync to HEAD@r269943.

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

show more ...

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statica

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

MFC

IFC @ r234692

sys/amd64/include/cpufunc.h
sys/amd64/include/fpu.h
sys/amd64/amd64/fpu.c
sys/amd64/vmm/vmm.c

- Add API to allow vmm FPU state init/save/restore.

FP stuff discussed with: kib

Merge head r232686 through r233825 into projects/pf/head.

- Clean up timestamps in msgbuf code. The timestamps should now be
inserted after the priority token thus cleaning up the output.
- Remove the needless double internal do_add_char function.
- Re

- Clean up timestamps in msgbuf code. The timestamps should now be
inserted after the priority token thus cleaning up the output.
- Remove the needless double internal do_add_char function.
- Resolve a possible deadlock if interrupts are
disabled and getnanotime is called

Reviewed by: bde kmacy, avg, sbruno (various versions)
Approved by: cperciva
MFC after: 2 weeks

show more ...

IFC @231845

Sponsored by: Cisco Systems, Inc.

Add a timestamp to the msgbuf output in order to determine when when
messages were printed.

This can be enabled with the kern.msgbuf_show_timestamp sysctl

PR: kern/161553
Reviewed by: avg
Submitte

Add a timestamp to the msgbuf output in order to determine when when
messages were printed.

This can be enabled with the kern.msgbuf_show_timestamp sysctl

PR: kern/161553
Reviewed by: avg
Submitted by: Arnaud Lacombe <lacombar@gmail.com>
Approved by: cperciva
MFC after: 1 month

show more ...