geom_stripe: Cascade cantrim just like we do for gmirror

If any of the disks can support trim, cascade that up the
stack. Otherwise, trims won't pass through striped raid setups.

PR: 277673
Reviewe

geom_stripe: Cascade cantrim just like we do for gmirror

If any of the disks can support trim, cascade that up the
stack. Otherwise, trims won't pass through striped raid setups.

PR: 277673
Reviewed by: imp (minor style tweaks from bug report)

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

GEOM: Set G_CF_DIRECT_SEND/RECEIVE for taste consumers.

All I/O requests through the taste consumers are synchronous, done
with g_read_data() and without any locks held. It makes no sense
to delega

GEOM: Set G_CF_DIRECT_SEND/RECEIVE for taste consumers.

All I/O requests through the taste consumers are synchronous, done
with g_read_data() and without any locks held. It makes no sense
to delegate the I/O to g_down/g_up threads.

This removes many of context switches during disk retaste.

MFC after: 2 weeks

show more ...

geom(4): Fix some of the "set but not used" warnings

The few I've left in place look like potential bugs.

Sponsored By: EPSRC

geom(4): Mark all sysctls as CTLFLAG_MPSAFE.

This code does not use Giant lock for very long time.

MFC after: 2 weeks

Make MAXPHYS tunable. Bump MAXPHYS to 1M.

Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.

Make b_pag

Make MAXPHYS tunable. Bump MAXPHYS to 1M.

Replace MAXPHYS by runtime variable maxphys. It is initialized from
MAXPHYS by default, but can be also adjusted with the tunable kern.maxphys.

Make b_pages[] array in struct buf flexible. Size b_pages[] for buffer
cache buffers exactly to atop(maxbcachebuf) (currently it is sized to
atop(MAXPHYS)), and b_pages[] for pbufs is sized to atop(maxphys) + 1.
The +1 for pbufs allow several pbuf consumers, among them vmapbuf(),
to use unaligned buffers still sized to maxphys, esp. when such
buffers come from userspace (*). Overall, we save significant amount
of otherwise wasted memory in b_pages[] for buffer cache buffers,
while bumping MAXPHYS to desired high value.

Eliminate all direct uses of the MAXPHYS constant in kernel and driver
sources, except a place which initialize maxphys. Some random (and
arguably weird) uses of MAXPHYS, e.g. in linuxolator, are converted
straight. Some drivers, which use MAXPHYS to size embeded structures,
get private MAXPHYS-like constant; their convertion is out of scope
for this work.

Changes to cam/, dev/ahci, dev/ata, dev/mpr, dev/mpt, dev/mvs,
dev/siis, where either submitted by, or based on changes by mav.

Suggested by: mav (*)
Reviewed by: imp, mav, imp, mckusick, scottl (intermediate versions)
Tested by: pho
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D27225

show more ...

Make g_attach() return ENXIO for orphaned providers; update various
classes to add missing error checking.

Reviewed by: imp
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Di

Make g_attach() return ENXIO for orphaned providers; update various
classes to add missing error checking.

Reviewed by: imp
MFC after: 2 weeks
Sponsored by: NetApp, Inc.
Sponsored by: Klara, Inc.
Differential Revision: https://reviews.freebsd.org/D26658

show more ...

MFH

Sponsored by: Rubicon Communications, LLC (netgate.com)

Consistently use gctl_get_provider instead of home-grown variants.

Reviewed by: cem, imp
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D25739

sys/geom: consistently use _PATH_DEV instead of hardcoding "/dev/".

Reviewed by: cem
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D25565

Merge ^/head r358269 through r358399.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly mark

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked).
Use it in preparation for a general review of all nodes.

This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Mark all obvious cases as MPSAFE. All entries that haven't been marked
as MPSAFE before are by default marked as NEEDGIANT

Approved by: kib (mentor, blanket)
Commented by: kib, gallatin, melifaro
Differential Revision: https://reviews.freebsd.org/D23718

show more ...

Merge ^/head r357119 through r357178.

Fix aggregating geoms for BIO_SPEEDUP.

If the bio was split into several bios going down, completion computes
bio_completed of the original bio as sum of the bio_completes of the
splits. For BIO_SE

Fix aggregating geoms for BIO_SPEEDUP.

If the bio was split into several bios going down, completion computes
bio_completed of the original bio as sum of the bio_completes of the
splits. For BIO_SETUP, bio_length means something different than the
length. it is the requested speedup amount, and is duplicated into the
splits, which is in fact reasonable, since we cannot know how the
previous activity was distributed among subordinate geoms. Obviously,
the sum of n bio_length is greater than bio_length for n > 1, which
triggers assert that bio_length >= bio_completed for e.g. geom_stripe
and geom_raid3.

Fix this by reassigning bio_completed from bio_length for completed
BIO_SPEEDED, I do not think it really mattters what we return in
bio_completed.

Reported and tested by: pho
Reviewed by: imp
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D23380

show more ...

Pass BIO_SPEEDUP through all the geom layers

While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom,

Pass BIO_SPEEDUP through all the geom layers

While some geom layers pass unknown commands down, not all do. For the ones that
don't, pass BIO_SPEEDUP down to the providers that constittue the geom, as
applicable. No changes to vinum or virstor because I was unsure how to add this
support, and I'm also unsure how to test these. gvinum doesn't implement
BIO_FLUSH either, so it may just be poorly maintained. gvirstor is for testing
and not supportig BIO_SPEEDUP is fine.

Reviewed by: chs
Differential Revision: https://reviews.freebsd.org/D23183

show more ...

GEOM: Reduce unnecessary log interleaving with sbufs

Similar to what was done for device_printfs in r347229.

Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; docum

GEOM: Reduce unnecessary log interleaving with sbufs

Similar to what was done for device_printfs in r347229.

Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an
sbuf; documented in g_bio.9.

Reviewed by: markj
Discussed with: rlibby
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D21165

show more ...

MFHead @349234

Sponsored by: The FreeBSD Foundation

Use sbuf_cat() in GEOM confxml generation.

When it comes to megabytes of text, difference between sbuf_printf() and
sbuf_cat() becomes substantial.

MFC after: 2 weeks
Sponsored by: iXsystems, Inc.

Merge ^/head r339813 through r340125.

Extend stripeoffset and stripesize of GEOMs from u_int to off_t

GEOM's stripeoffset overflows at 4 gigabyte margin (2^32)
because of its u_int type. This leads to incorrect data in the output
genera

Extend stripeoffset and stripesize of GEOMs from u_int to off_t

GEOM's stripeoffset overflows at 4 gigabyte margin (2^32)
because of its u_int type. This leads to incorrect data in the output
generated by "sysctl kern.geom.confxml" command, "graid list" etc.
when GEOM array has volumes larger than 4G, for example.

This change does not affect ABI but changes KBI. No MFC planned.

Differential Revision: https://reviews.freebsd.org/D13426

show more ...

Annotate geom modules with MODULE_VERSION

GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.

This happens due a module loading bug. By default GEOM ELI ca

Annotate geom modules with MODULE_VERSION

GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.

This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.

MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.

Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992

show more ...

sys/geom: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone

sys/geom: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r305892 through r306302.