Revision tags: release/14.0.0 |
|
#
95ee2897 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
#
4d846d26 |
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg MFC After: 3 days Sponsored by: Netflix
show more ...
|
Revision tags: release/13.2.0, release/12.4.0 |
|
#
489ba222 |
| 13-May-2022 |
Mitchell Horne <mhorne@FreeBSD.org> |
kerneldump: remove physical argument from d_dumper
The physical address argument is essentially ignored by every dumper method. In addition, the dump routines don't actually pass a real address; eve
kerneldump: remove physical argument from d_dumper
The physical address argument is essentially ignored by every dumper method. In addition, the dump routines don't actually pass a real address; every call to dump_append() passes a value of zero for physical.
Reviewed by: markj MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D35173
show more ...
|
Revision tags: release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0 |
|
#
75dfc66c |
| 27-Feb-2020 |
Dimitry Andric <dim@FreeBSD.org> |
Merge ^/head r358269 through r358399.
|
#
7029da5c |
| 26-Feb-2020 |
Pawel Biernacki <kaktus@FreeBSD.org> |
Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are still not MPSAFE (or already are but aren’t properly mark
Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (17 of many)
r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are still not MPSAFE (or already are but aren’t properly marked). Use it in preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and SYSCTL_PROC nodes using one of the soon-to-be-required flags.
Mark all obvious cases as MPSAFE. All entries that haven't been marked as MPSAFE before are by default marked as NEEDGIANT
Approved by: kib (mentor, blanket) Commented by: kib, gallatin, melifaro Differential Revision: https://reviews.freebsd.org/D23718
show more ...
|
Revision tags: release/12.1.0 |
|
#
ac03832e |
| 07-Aug-2019 |
Conrad Meyer <cem@FreeBSD.org> |
GEOM: Reduce unnecessary log interleaving with sbufs
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an sbuf; docum
GEOM: Reduce unnecessary log interleaving with sbufs
Similar to what was done for device_printfs in r347229.
Convert g_print_bio() to a thin shim around g_format_bio(), which acts on an sbuf; documented in g_bio.9.
Reviewed by: markj Discussed with: rlibby Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D21165
show more ...
|
Revision tags: release/11.3.0 |
|
#
7648bc9f |
| 13-May-2019 |
Alan Somers <asomers@FreeBSD.org> |
MFHead @347527
Sponsored by: The FreeBSD Foundation
|
#
6b6e2954 |
| 06-May-2019 |
Conrad Meyer <cem@FreeBSD.org> |
List-ify kernel dump device configuration
Allow users to specify multiple dump configurations in a prioritized list. This enables fallback to secondary device(s) if primary dump fails. E.g., one mi
List-ify kernel dump device configuration
Allow users to specify multiple dump configurations in a prioritized list. This enables fallback to secondary device(s) if primary dump fails. E.g., one might configure a preference for netdump, but fallback to disk dump as a second choice if netdump is unavailable.
This change does not list-ify netdump configuration, which is tracked separately from ordinary disk dumps internally; only one netdump configuration can be made at a time, for now. It also does not implement IPv6 netdump.
savecore(8) is already capable of scanning and iterating multiple devices from /etc/fstab or passed on the command line.
This change doesn't update the rc or loader variables 'dumpdev' in any way; it can still be set to configure a single dump device, and rc.d/savecore still uses it as a single device. Only dumpon(8) is updated to be able to configure the more complicated configurations for now.
As part of revving the ABI, unify netdump and disk dump configuration ioctl / structure, and leave room for ipv6 netdump as a future possibility. Backwards-compatibility ioctls are added to smooth ABI transition, especially for developers who may not keep kernel and userspace perfectly synced.
Reviewed by: markj, scottl (earlier version) Relnotes: maybe Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D19996
show more ...
|
Revision tags: release/12.0.0, release/11.2.0 |
|
#
3728855a |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/geom: adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone
sys/geom: adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I was using misidentified many licenses so this was mostly a manual - error prone - task.
The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts.
show more ...
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0 |
|
#
246e7a2b |
| 02-Sep-2014 |
Neel Natu <neel@FreeBSD.org> |
IFC @r269962
Submitted by: Anish Gupta (akgupt3@gmail.com)
|
#
ee7b0571 |
| 19-Aug-2014 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge head from 7/28
|
#
1b833d53 |
| 13-Aug-2014 |
Alexander V. Chernikov <melifaro@FreeBSD.org> |
Sync to HEAD@r269943.
|
Revision tags: release/9.3.0 |
|
#
af3b2549 |
| 28-Jun-2014 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Pull in r267961 and r267973 again. Fix for issues reported will follow.
|
#
37a107a4 |
| 28-Jun-2014 |
Glen Barber <gjb@FreeBSD.org> |
Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output, such as:
1) no output from sysctl(8) 2) erroneously returning ENOMEM with tools like truss(1) or uname(1
Revert r267961, r267973:
These changes prevent sysctl(8) from returning proper output, such as:
1) no output from sysctl(8) 2) erroneously returning ENOMEM with tools like truss(1) or uname(1) truss: can not get etype: Cannot allocate memory
show more ...
|
#
3da1cf1e |
| 27-Jun-2014 |
Hans Petter Selasky <hselasky@FreeBSD.org> |
Extend the meaning of the CTLFLAG_TUN flag to automatically check if there is an environment variable which shall initialize the SYSCTL during early boot. This works for all SYSCTL types both statica
Extend the meaning of the CTLFLAG_TUN flag to automatically check if there is an environment variable which shall initialize the SYSCTL during early boot. This works for all SYSCTL types both statically and dynamically created ones, except for the SYSCTL NODE type and SYSCTLs which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to be used in the case a tunable sysctl has a custom initialisation function allowing the sysctl to still be marked as a tunable. The kernel SYSCTL API is mostly the same, with a few exceptions for some special operations like iterating childrens of a static/extern SYSCTL node. This operation should probably be made into a factored out common macro, hence some device drivers use this. The reason for changing the SYSCTL API was the need for a SYSCTL parent OID pointer and not only the SYSCTL parent OID list pointer in order to quickly generate the sysctl path. The motivation behind this patch is to avoid parameter loading cludges inside the OFED driver subsystem. Instead of adding special code to the OFED driver subsystem to post-load tunables into dynamically created sysctls, we generalize this in the kernel.
Other changes: - Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask" to "hw.pcic.intr_mask". - Removed redundant TUNABLE statements throughout the kernel. - Some minor code rewrites in connection to removing not needed TUNABLE statements. - Added a missing SYSCTL_DECL(). - Wrapped two very long lines. - Avoid malloc()/free() inside sysctl string handling, in case it is called to initialize a sysctl from a tunable, hence malloc()/free() is not ready when sysctls from the sysctl dataset are registered. - Bumped FreeBSD version to indicate SYSCTL API change.
MFC after: 2 weeks Sponsored by: Mellanox Technologies
show more ...
|
#
3b8f0845 |
| 28-Apr-2014 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge head
|
#
84e51a1b |
| 23-Apr-2014 |
Alan Somers <asomers@FreeBSD.org> |
IFC @264767
|
#
485ac45a |
| 04-Feb-2014 |
Peter Grehan <grehan@FreeBSD.org> |
MFC @ r259205 in preparation for some SVM updates. (for real this time)
|
Revision tags: release/10.0.0 |
|
#
0bfd163f |
| 18-Oct-2013 |
Gleb Smirnoff <glebius@FreeBSD.org> |
Merge head r233826 through r256722.
|
#
b43560ab |
| 16-Oct-2013 |
Alexander Motin <mav@FreeBSD.org> |
MFprojects/camlock r256445: Add unmapped I/O support to GEOM RAID.
|
#
1ccca3b5 |
| 10-Oct-2013 |
Alan Somers <asomers@FreeBSD.org> |
IFC @256277
Approved by: ken (mentor)
|
Revision tags: release/9.2.0 |
|
#
ef90af83 |
| 20-Sep-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r255692
Comment out IA32_MISC_ENABLE MSR access - this doesn't exist on AMD. Need to sort out how arch-specific MSRs will be handled.
|
#
d1d01586 |
| 05-Sep-2013 |
Simon J. Gerraty <sjg@FreeBSD.org> |
Merge from head
|
#
46ed9e49 |
| 04-Sep-2013 |
Peter Grehan <grehan@FreeBSD.org> |
IFC @ r255209
|
#
0f0b2fd8 |
| 13-Aug-2013 |
Alexander Motin <mav@FreeBSD.org> |
Return error when opening read-only volumes (like RAID4/5/...) for writing. Previously opens succeeded, but actual write operations returned errors.
Requested by: peter MFC after: 2 weeks
|