sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

usb: clean up empty lines in .c and .h files

MFHead@r345275

MFhead@r344996

Fix ieee80211_radiotap(9) usage in wireless drivers:

- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be

Fix ieee80211_radiotap(9) usage in wireless drivers:

- Alignment issues:
* Add missing __packed attributes + padding across all drivers; in
most places there was an assumption that padding will be always
minimally suitable; in few places - e.g., in urtw(4) / rtwn(4) -
padding was just missing.
* Add __aligned(8) attribute for all Rx radiotap headers since they can
contain 64-bit TSF timestamp; it cannot appear in Tx radiotap headers, so
just drop the attribute here. Refresh ieee80211_radiotap(9) man page
accordingly.

- Since net80211 automatically updates channel frequency / flags in
ieee80211_radiotap_chan_change() drop duplicate setup for these fields
in drivers.

Tested with Netgear WG111 v3 (urtw(4)), STA mode.

MFC after: 2 weeks

show more ...

Merge ^/head r343320 through r343570.

Remove 2GHz channel list copies from wireless drivers.

Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.

Remove 2GHz channel list copies from wireless drivers.

Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.

Checked with RTL8188EE, country US / JP / KR / UA.

MFC after: 2 weeks

show more ...

Merge ^/head r306412 through r306905.

net80211: ieee80211_ratectl*: switch to reusable KPI

Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl

net80211: ieee80211_ratectl*: switch to reusable KPI

Replace various void * / int argument combinations with common structures:
- ieee80211_ratectl_tx_status for *_tx_complete();
- ieee80211_ratectl_tx_stats for *_tx_update();

While here, improve amrr_tx_update() for a bit:
1. In case, if receiver is not known (typical for Ralink USB drivers),
refresh Tx rate for all nodes on the interface.
2. There was a misuse:
- otus(4) sends non-decreasing counters (as originally intended);
- but ural(4), rum(4) and run(4) are using 'read & clear' registers
to obtain statistics for some period of time (and those 'last period'
values are used as arguments for tx_update()). If arguments are not big
enough, they are just discarded after the next call.

Fix: move counting into *_tx_update()
(now otus(4) will zero out all node counters after every tx_update() call)

Tested with:
- Intel 3945BG (wpi(4)), STA mode.
- WUSB54GC (rum(4)), STA / HOSTAP mode.
- RTL8188EU (urtwn(4)), STA mode.

Reviewed by: adrian
Differential Revision: https://reviews.freebsd.org/D8037

show more ...

zyd: switch to ieee80211_add_channel_list_*()

- Use device's channel list instead of default one (adds 12, 13 and 14
2GHz channels).
- Add ic_getradiocaps() method.

Differential Revision: https://r

zyd: switch to ieee80211_add_channel_list_*()

- Use device's channel list instead of default one (adds 12, 13 and 14
2GHz channels).
- Add ic_getradiocaps() method.

Differential Revision: https://reviews.freebsd.org/D6171

show more ...

MFH

Sponsored by: The FreeBSD Foundation

Merge ^/head r296007 through r296368.

zyd, run, ural: do not corrupt MAC address

Do not use ic_macaddr as a storage for current BSSID;
it may be reused in vap creation procedure;
similar to r288619.

Approved by: adrian (mentor)
Differe

zyd, run, ural: do not corrupt MAC address

Do not use ic_macaddr as a storage for current BSSID;
it may be reused in vap creation procedure;
similar to r288619.

Approved by: adrian (mentor)
Differential Revision: https://reviews.freebsd.org/D5513

show more ...

Merge from head

Sponsored by: Gandi.net

MFH to r289370

Sponsored by: The FreeBSD Foundation

Merge from head

Sync up with head up to r289211.

net80211 drivers: eliminate any references to sc_rxtap_len/sc_txtap_len (never used here)

Submitted by: <s3erios@gmail.com>
Differential Revision: https://reviews.freebsd.org/D3776

Finish merging from head, messed up in previous attempt

Merge r286744-r287584 from head.

Merge ^/head r286858 through r287489.

Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just li

Replay r286410. Change KPI of how device drivers that provide wireless
connectivity interact with the net80211 stack.

Historical background: originally wireless devices created an interface,
just like Ethernet devices do. Name of an interface matched the name of
the driver that created. Later, wlan(4) layer was introduced, and the
wlanX interfaces become the actual interface, leaving original ones as
"a parent interface" of wlanX. Kernelwise, the KPI between net80211 layer
and a driver became a mix of methods that pass a pointer to struct ifnet
as identifier and methods that pass pointer to struct ieee80211com. From
user point of view, the parent interface just hangs on in the ifconfig
list, and user can't do anything useful with it.

Now, the struct ifnet goes away. The struct ieee80211com is the only
KPI between a device driver and net80211. Details:

- The struct ieee80211com is embedded into drivers softc.
- Packets are sent via new ic_transmit method, which is very much like
the previous if_transmit.
- Bringing parent up/down is done via new ic_parent method, which notifies
driver about any changes: number of wlan(4) interfaces, number of them
in promisc or allmulti state.
- Device specific ioctls (if any) are received on new ic_ioctl method.
- Packets/errors accounting are done by the stack. In certain cases, when
driver experiences errors and can not attribute them to any specific
interface, driver updates ic_oerrors or ic_ierrors counters.

Details on interface configuration with new world order:
- A sequence of commands needed to bring up wireless DOESN"T change.
- /etc/rc.conf parameters DON'T change.
- List of devices that can be used to create wlan(4) interfaces is
now provided by net.wlan.devices sysctl.

Most drivers in this change were converted by me, except of wpi(4),
that was done by Andriy Voskoboinyk. Big thanks to Kevin Lo for testing
changes to at least 8 drivers. Thanks to pluknet@, Oliver Hartmann,
Olivier Cochard, gjb@, mmoll@, op@ and lev@, who also participated in
testing.

Reviewed by: adrian
Sponsored by: Netflix
Sponsored by: Nginx, Inc.

show more ...

Merge ^/head r286422 through r286684.

Merge from HEAD

Revert the wifi ifnet changes until things are more baked and tested.

* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are

Revert the wifi ifnet changes until things are more baked and tested.

* 286410
* 286413
* 286416

The initial commit broke a variety of debug and features that aren't
in the GENERIC kernels but are enabled in other platforms.

show more ...