uath: add support for GCMP-128 encryption

Explicitly set the software ciphers; add support for GCMP-128.

Locally tested:

* AR5523 11abg NIC, 2/5GHz STA operation, GCMP forced
in wpa_supplicant.c

uath: add support for GCMP-128 encryption

Explicitly set the software ciphers; add support for GCMP-128.

Locally tested:

* AR5523 11abg NIC, 2/5GHz STA operation, GCMP forced
in wpa_supplicant.conf

Differential Revision: https://reviews.freebsd.org/D49370
Reviewed by: bz

show more ...

usb: Kill left-over cdefs.h includes

These includes were for __FBSD_RCSID() macro. They weren't formatted
like the rest of the tree so weren't trimmed automatically when that
script was run. Trim th

usb: Kill left-over cdefs.h includes

These includes were for __FBSD_RCSID() macro. They weren't formatted
like the rest of the tree so weren't trimmed automatically when that
script was run. Trim them now.

MFC After: 1 week
Sponsored by: Netflix

show more ...

sys: convert ni->ni_txrate references use to the new net80211 API

This just mechanically converts things.

* For linuxkpi, it was just used for display.
* For uath, it was just used for display, as

sys: convert ni->ni_txrate references use to the new net80211 API

This just mechanically converts things.

* For linuxkpi, it was just used for display.
* For uath, it was just used for display, as firmware
doesn't report it up.

Differential Revision: https://reviews.freebsd.org/D48602
Reviewed by: bz, thj

show more ...

uath: Avoid a NULL dereference

PR: 284643
Reviewed by: adrian
Approved by: emaste (mentor)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D48948

uath: flush data/commands to the firmware before changing channel / state

The driver wasn't stable - it would start fine, but during scan
it would eventually hang and no further command endpoint tra

uath: flush data/commands to the firmware before changing channel / state

The driver wasn't stable - it would start fine, but during scan
it would eventually hang and no further command endpoint transfers
would complete.

After adding some debugging and looking at the logs I noticed that
things went sideways once a /data/ frame was sent. The channel
change config happened between the data frame being sent and
being completed.

My guess is that the firmware doesn't like a channel change
and reset whilst there's pending data frames. Checking the Linux
driver I found that it was doing a flush before a channel change,
and we're doing it afterwards. This acts like a fence around
ensuring scheduled TX work has completed. In net80211 the
transmit path and the control path aren't serialised, so it's
very often the case that ioctls, state changes, etc occur
whilst in parallel there are frame transmits being scheduled.

This seems to happen more frequently on a more recent, high core
(8) machine with XHCI. I remember testing this driver years ago
on single and dual core CPU laptops with no problems.

So, add some flushes - before a channel change, and during
a transition to AUTH when the BSS config is being programmed into
the firmware. These two fences seem enough to reliably
associate as a 2GHz and 5GHz STA.

Note that this isn't entirely blocking all newly queued
transmit work from occuring until after the NIC has finished
configuration. That will need some further investigation.

Locally tested:

* Wistron NuWeb AR5523 dual-band NIC, STA mode, 2/5GHz

Differential Revision: https://reviews.freebsd.org/D47655

show more ...

usb: fix the ID for the dual-band Wistron AR5523 USB NIC

Use the correct ID, as I have one of these NICs.
Add the previous one back in case it's out there in the wild.

@emaste did a bit of a dig in

usb: fix the ID for the dual-band Wistron AR5523 USB NIC

Use the correct ID, as I have one of these NICs.
Add the previous one back in case it's out there in the wild.

@emaste did a bit of a dig into the product numbers.
@sam did change the ID from 0x0828 -> 082a in a commit
a long while back. It's worth reading the code review for
further details.

However, I do have one of these NICs and I verified that
it indeed has the given ID, and with some follow-up work
to fix some race conditions, it works fine in 2GHz 11bg
and 5GHz 11a operation.

Differential Revision: https://reviews.freebsd.org/D47654

Obtained from: Linux, drivers/net/wireless/ath/ar5523/ar5523.c

show more ...

Revert "Widen EPOCH(9) usage in USB WLAN drivers."

This reverts commit 21c4082de9e2cf9a0fd81a9a981ab06022956847.

Sponsored by: The FreeBSD Foundation
MFC after: 3 days

net80211 / drivers: remove public use of ieee80211_node_incref()

ieee80211_node_incref() is the FreeBSD implementation of
ieee80211_ref_node(). Not being interested in the node returned
it was used

net80211 / drivers: remove public use of ieee80211_node_incref()

ieee80211_node_incref() is the FreeBSD implementation of
ieee80211_ref_node(). Not being interested in the node returned
it was used as a shortcut in 3 drivers (ath, uath, wpi).
Replace the call with the public KPI of ieee80211_ref_node() and
ignore the result.
This leaves us with the single internal call going
ieee80211_ref_node() -> ieee80211_node_incref() and that should
help increasing portability but also limiting the places to trace
for node reference operations.

Sponsored by: The FreeBSD Foundation
MFC after: 4 weeks

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

usb(4): Substitute "unsigned int" using the equivalent and shorter "unsigned" keyword.

MFC after: 1 week
Sponsored by: NVIDIA Networking

usb: Remove unused devclass arguments to DRIVER_MODULE.

uath(4): Fix incorrect byte-swapping and a buffer length check.

PR: 263638
Reported by: Jeff Gibbons <jgibbons@protogate.com>
MFC after: 1 week
Sponsored by: NVIDIA Networking

Merge ^/head r357966 through r357999.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marke

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632

show more ...

Merge ^/head r357270 through r357349.

Widen EPOCH(9) usage in USB WLAN drivers.

This patch should unbreak the USB WLAN drivers after r357004.

Pointy hat: glebius@
Sponsored by: Mellanox Technologies

MFHead@r345880

uath(4), urtw(4): restart driver if device does not respond after Tx request

MFC after: 1 week

Merge ^/head r343320 through r343570.

Drop some unneeded includes from wireless USB drivers.

MFC after: 1 week

usb/wlan/*: properly include "opt_wlan.h" into all drivers

Without it driver cannot be loaded when wlan(4) module is built with
'options IEEE80211_DEBUG_REFCNT'.

SPDX: mostly fixes to previous changes.

Introduce the recently approved BSD-1-Clause and replace 0BSD which
never did fit well our use cases.

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r323559 through r325504.