usb: Kill left-over cdefs.h includes

These includes were for __FBSD_RCSID() macro. They weren't formatted
like the rest of the tree so weren't trimmed automatically when that
script was run. Trim th

usb: Kill left-over cdefs.h includes

These includes were for __FBSD_RCSID() macro. They weren't formatted
like the rest of the tree so weren't trimmed automatically when that
script was run. Trim them now.

MFC After: 1 week
Sponsored by: Netflix

show more ...

Move support of Realtek 8156/8156B from cdce(4) to ure(4)

Reviewed by: kevlo, imp, hrs
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D45088

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

Mechanically convert usb ethernet drivers to DrvAPI

Reviewed by: zlei
Sponsored by: Juniper Networks, Inc.
Differential Revision: https://reviews.freebsd.org/D37812

usb: add support for Huawei E5573Cs322

Switch the now added E5573Cs322_ECM (0x14db) as well per default to NCM.
With this patch we default all devices to simple NCM mode to avoid the
problem and get

usb: add support for Huawei E5573Cs322

Switch the now added E5573Cs322_ECM (0x14db) as well per default to NCM.
With this patch we default all devices to simple NCM mode to avoid the
problem and get a consistent reliable behavior. No matter what firmware
version and provider mix are involved.

Rationale:
Even the bigger SOC shows under complex load in ECM (double-nat) mode
the same performance drop from 25Mbit to 2Mbit Line Speed, similar to E3372h.
Reason: Thermal problems (reported via serial debug interface in ACM Mode)
after 2-3 minutes load.

Fix the root cause and bundle a working firmware is out of reach because
Huawei sells the same hardware, different (crippled) firmware versions
at different price points in different markets as strategy.

Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633

show more ...

usb: add new scsi_huawei eject3 & eject4 driver support

Add initialization for new Huawei 4G E3372_NCM, E3372v153_NCM,
E5573Cs322_NCM, E5573Cs322_ECM, and E5573Cs322_ACM.

Remove now-obsolete Huawei

usb: add new scsi_huawei eject3 & eject4 driver support

Add initialization for new Huawei 4G E3372_NCM, E3372v153_NCM,
E5573Cs322_NCM, E5573Cs322_ECM, and E5573Cs322_ACM.

Remove now-obsolete Huawei 3G E3131 init sequence. These devices are
obsolete, share IDs with new devices and the 3G networks are shutdown.
These old devices work correctly via the 4G code while still allowing
the shared IDs to work differently for the new devices.

Reviewed by: imp
Pull Request: https://github.com/freebsd/freebsd-src/pull/633

show more ...

usb: Remove unused devclass arguments to DRIVER_MODULE.

usb: Add a __usbdebug_used for variables only used under #ifdef USB_DEBUG.

Use it for various variables only used in DPRINTF debug traces
conditional on USB_DEBUG.

cdce: Fix a -Wunused-but-set-variable warning

MFC after: 1 week

if_cdce: Add support for setting RX filtering

We can now set promisc and allmulti modes.
Filtering of given multicast addresses is not supported.
Changing the mode is done by sending a command descr

if_cdce: Add support for setting RX filtering

We can now set promisc and allmulti modes.
Filtering of given multicast addresses is not supported.
Changing the mode is done by sending a command described in:
"USB CDC Subclass Specification for Ethernet Devices v1.2, section 6.2.4".
This means that at least in theory this feature should work with all
modems that are using this driver.

This fixes Huawei E3372h-320 running new firmware in "HiLink" mode.
Previously it would reset a few seconds after its mode was changed
with "usb_modeswitch".
Setting RX filter to default value at the end of attach function
fixed that.

Sponsored by: Stormshield
Obtained from: Semihalf
Differential revision: https://reviews.freebsd.org/D31766
MFC after: 2 weeks
Reviewed by: hps

show more ...

ued may be NULL here which will cause a panic... reproducable by
simply doing a usbconfig reset on a device which doesn't reset itself
properly...

Add support for link status, media and VLAN MTU (if supported) to if_cdce...

This makes it more usable in that dhclient will autolaunch from devd
now when cdce devices are plugged in.. It also sets

Add support for link status, media and VLAN MTU (if supported) to if_cdce...

This makes it more usable in that dhclient will autolaunch from devd
now when cdce devices are plugged in.. It also sets the baudrate, but
this isn't exported via tools, and CDCE doesn't have a good way to
specify the media type, so there isn't a good way to tell userland
what the speed is currently...

Reviewed by: hps
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D30625

show more ...

Remove USB device ID added by SVN r150701 in the CDC USB ethernet driver.
Since then, the FreeBSD USB stack has got proper USB RNDIS support.

PR: 254345
MFC after: 1 week
Sponsored by: Mellanox Tec

Remove USB device ID added by SVN r150701 in the CDC USB ethernet driver.
Since then, the FreeBSD USB stack has got proper USB RNDIS support.

PR: 254345
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking

show more ...

usb: clean up empty lines in .c and .h files

Merge ^/head r357966 through r357999.

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marke

Mark more nodes as CTLFLAG_MPSAFE or CTLFLAG_NEEDGIANT (2 of many)

r357614 added CTLFLAG_NEEDGIANT to make it easier to find nodes that are
still not MPSAFE (or already are but aren’t properly marked). Use it in
preparation for a general review of all nodes.
This is non-functional change that adds annotations to SYSCTL_NODE and
SYSCTL_PROC nodes using one of the soon-to-be-required flags.

Reviewed by: hselasky, kib
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D23632

show more ...

MFHead @r350386

Sponsored by: The FreeBSD Foundation

Add support for RTL8156, 2.5GbE USB network controller, to if_cdce(4).
This chip can be found in Planex USB-LAN2500R.

MFHead @349234

Sponsored by: The FreeBSD Foundation

Separate kernel crc32() implementation to its own header (gsb_crc32.h) and
rename the source to gsb_crc32.c.

This is a prerequisite of unifying kernel zlib instances.

PR: 229763
Submitted by: Yosh

Separate kernel crc32() implementation to its own header (gsb_crc32.h) and
rename the source to gsb_crc32.c.

This is a prerequisite of unifying kernel zlib instances.

PR: 229763
Submitted by: Yoshihiro Ota <ota at j.email.ne.jp>
Differential Revision: https://reviews.freebsd.org/D20193

show more ...

MFHead @348740

Sponsored by: The FreeBSD Foundation

Extract eventfilter declarations to sys/_eventfilter.h

This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces hea

Extract eventfilter declarations to sys/_eventfilter.h

This allows replacing "sys/eventfilter.h" includes with "sys/_eventfilter.h"
in other header files (e.g., sys/{bus,conf,cpu}.h) and reduces header
pollution substantially.

EVENTHANDLER_DECLARE and EVENTHANDLER_LIST_DECLAREs were moved out of .c
files into appropriate headers (e.g., sys/proc.h, powernv/opal.h).

As a side effect of reduced header pollution, many .c files and headers no
longer contain needed definitions. The remainder of the patch addresses
adding appropriate includes to fix those files.

LOCK_DEBUG and LOCK_FILE_LINE_ARG are moved to sys/_lock.h, as required by
sys/mutex.h since r326106 (but silently protected by header pollution prior
to this change).

No functional change (intended). Of course, any out of tree modules that
relied on header pollution for sys/eventhandler.h, sys/lock.h, or
sys/mutex.h inclusion need to be fixed. __FreeBSD_version has been bumped.

show more ...

Improve support for USB based 3G/4G/5G dongles from Huawei.

PR: 192345
Sponsored by: Mellanox Technologies

Merge ^/head r325842 through r325998.

spdx: initial adoption of licensing ID tags.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensou

spdx: initial adoption of licensing ID tags.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

Special thanks to Wind River for providing access to "The Duke of
Highlander" tool: an older (2014) run over FreeBSD tree was useful as a
starting point.

Initially, only tag files that use BSD 4-Clause "Original" license.

RelNotes: yes
Differential Revision: https://reviews.freebsd.org/D13133

show more ...