sys: Remove $FreeBSD$: one-line .c comment pattern

Remove /^/[*/]\s*\$FreeBSD\$.*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge from head

Catch up with head, primarily for the 1.14.4.0 firmware.

Merge ^/head r285341 through r285792.

Optimise the DWC OTG host mode driver's transmit path:

1) Use the TX FIFO empty interrupts to poll the transmit FIFO usage,
instead of using own software counters and waiting for SOF
interrupts. Ass

Optimise the DWC OTG host mode driver's transmit path:

1) Use the TX FIFO empty interrupts to poll the transmit FIFO usage,
instead of using own software counters and waiting for SOF
interrupts. Assume that enough FIFO space is available to execute one
USB OUT transfer of any kind when the TX FIFO is empty.

2) Use the host channel halted event to asynchronously wait for host
channels to be disabled instead of waiting for SOF interrupts. This
results in less turnaround time for re-using host channels and at the
same time increases the performance.

The network transmit performance measured by "iperf" for the "RPi-B v1
2011/12" board, increased from 45MBit/s to 65Mbit/s after applying the
changes above.

No regressions seen using:
- High Speed (BULK, CONTROL, INTERRUPT)
- Full Speed (All transfer types)
- Low Speed (Control and Interrupt)

MFC after: 1 month
Submitted by: Daisuke Aoyama <aoyama@peach.ne.jp>

show more ...

Merge sync of head

MFH: r278968-r280640

Sponsored by: The FreeBSD Foundation

Merge from head

Merge r278538 through r279514.

Merge ^/head r279163 through r279308.

Add support for the DWC OTG v2 chipset found in the STM32F4 series of
processors. Make sure we pullup the data lines in device mode when we
power on the port.

MFC after: 1 week

Merge head from 7/28

MFC @ r266724

An SVM update will follow this.

IFC @266473

Multiple DWC OTG host mode related fixes and improvements:

- Rework how we allocate and free USB host channels, so that we only
allocate a channel if there is a real packet going out on the USB
cabl

Multiple DWC OTG host mode related fixes and improvements:

- Rework how we allocate and free USB host channels, so that we only
allocate a channel if there is a real packet going out on the USB
cable.

- Use BULK type for control data and status, due to instabilities in
the HW it appears.

- Split FIFO TX levels into one for the periodic FIFO and one for the
non-periodic FIFO.

- Use correct HFNUM mask when scheduling host transactions. The HFNUM
register does not count the full 16-bit range.

- Correct START/COMPLETION slot for TT transactions. For INTERRUPT and
ISOCHRONOUS type transactions the hardware always respects the ODDFRM
bit, which means we need to allocate multiple host channels when
processing such endpoints, to not miss any so-called complete split
opportunities.

- When doing ISOCHRONOUS OUT transfers through a TT send all data
payload in a single ALL-burst. This deacreases the likelyhood for
isochronous data underruns.

- Fixed unbalanced unlock in case of "dwc_otg_init_fifo()" failure.

- Increase interrupt priority.

MFC after: 2 weeks

show more ...

Merge from head

Improve DWC OTG USB host side support for isochronous FULL and HIGH
speed data traffic going directly to a USB device or through a
so-called USB transaction translator.

Add checks that we are not ov

Improve DWC OTG USB host side support for isochronous FULL and HIGH
speed data traffic going directly to a USB device or through a
so-called USB transaction translator.

Add checks that we are not overusing the TX FIFO.

MFC after: 2 weeks

show more ...

Merge fresh head.

Sync with HEAD.

MFC

MFC @ r241285

IFC @ r242940

IFC @ r242684