uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIO

uart(4): Honor hardware state of NS8250-class for tsw_busy

In 9750d9e5, I brought the equivalent of the TS_BUSY flag back in a
mostly hardware-agnostic way in order to fix tty_drain() and, thus,
TIOCDRAIN for UARTs with TX FIFOs. This proved to be sufficient for
fixing the regression reported. So in light of the release cycle of
FreeBSD 10.3, I decided that this change was be good enough for the
time being and opted to go with the smallest possible yet generic
(for all UARTs driven by uart(4)) solution addressing the problem at
hand.

However, at least for the NS8250-class the above isn't a complete
fix as these UARTs only trigger an interrupt when the TX FIFO became
empty. At this point, there still can be an outstanding character
left in the transmit shift register as indicated via the LSR. Thus,
this change adds the 3rd (besides the tty(4) and generic uart(4) bits)
part I had in my tree ever since, adding a uart_txbusy method to be
queried in addition for tsw_busy and hooking it up as appropriate
for the NS8250-class.

As it turns out, the exact equivalent of this 3rd part later on was
implemented for uftdi(4) in 9ad221a5.

While at it, explain the rational behind the deliberately missing
locking in uart_tty_busy() (also applying to the generic sc_txbusy
testing already present).

show more ...

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remov

sys: Automated cleanup of cdefs and other formatting

Apply the following automated changes to try to eliminate
no-longer-needed sys/cdefs.h includes as well as now-empty
blank lines in a row.

Remove /^#if.*\n#endif.*\n#include\s+<sys/cdefs.h>.*\n/
Remove /\n+#include\s+<sys/cdefs.h>.*\n+#if.*\n#endif.*\n+/
Remove /\n+#if.*\n#endif.*\n+/
Remove /^#if.*\n#endif.*\n/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/types.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/param.h>/
Remove /\n+#include\s+<sys/cdefs.h>\n#include\s+<sys/capsicum.h>/

Sponsored by: Netflix

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

Downgrade tty_intr_event from a global

It can be static within uart_tty.c. It is an open question whether there
remains any real benefit to having uart instances share a swi thread.

Reviewed by: im

Downgrade tty_intr_event from a global

It can be static within uart_tty.c. It is an open question whether there
remains any real benefit to having uart instances share a swi thread.

Reviewed by: imp, markj, jhb
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D36938

show more ...

MFHead @349234

Sponsored by: The FreeBSD Foundation

Some devices take undesired actions when RTS and DTR are
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.

This patch allows "stty -f /

Some devices take undesired actions when RTS and DTR are
asserted. Some development boards for example will reset on DTR,
and some radio interfaces will transmit on RTS.

This patch allows "stty -f /dev/ttyu9.init -rtsdtr" to prevent
RTS and DTR from being asserted on open(), allowing these devices
to be used without problems.

Reviewed by: imp
Differential Revision: https://reviews.freebsd.org/D20031

show more ...

add support for console resuming, implement it for uart, use on x86

This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-in

add support for console resuming, implement it for uart, use on x86

This change adds a new optional console method cn_resume and a kernel
console interface cnresume. Consoles that may need to re-initialize
their hardware after suspend (e.g., because firmware does not care to do
it) will implement cn_resume. Note that it is called in rather early
environment not unlike early boot, so the same restrictions apply.
Platform specific code, for platforms that support hardware suspend,
should call cnresume early after resume, before any console output is
expected.

This change fixes a problem with a system of mine failing to resume when
a serial console is used. I found that the serial port was in a strange
configuration and an attempt to write to it likely resulted in an
infinite loop.

To avoid adding cn_resume method to every console driver, CONSOLE_DRIVER
macro has been extended to support optional methods.

Reviewed by: imp, mav
MFC after: 3 weeks
Differential Revision: https://reviews.freebsd.org/D15552

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

MfH @r295202

Expect to see panics in routing code at least now.

MFH

Sponsored by: The FreeBSD Foundation

Merge ^/head r294599 through r294776.

- Make the code consistent with itself style-wise and bring it closer
to style(9).
- Mark unused arguments as such.
- Make the ttystates table const.

Merge ^/head r294169 through r294598.

MFH @r294567

MFH

Sponsored by: The FreeBSD Foundation

Fix tty_drain() and, thus, TIOCDRAIN of the current tty(4) incarnation
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS

Fix tty_drain() and, thus, TIOCDRAIN of the current tty(4) incarnation
to actually wait until the TX FIFOs of UARTs have be drained before
returning. This is done by bringing the equivalent of the TS_BUSY flag
found in the previous implementation back in an ABI-preserving way.
Reported and tested by: Patrick Powell

Most likely, drivers for USB-serial-adapters likewise incorporating
TX FIFOs as well as other terminal devices that buffer output in some
form should also provide implementations of tsw_busy.

MFC after: 3 days

show more ...

Merge from head

Sponsored by: Gandi.net

Finish merging from head, messed up in previous attempt

Catch up with head, primarily for the 1.14.4.0 firmware.

Merge ^/head r286422 through r286684.

Merge from HEAD

Provide the tty-layer mutex when initializing the pps api. This allows
time_pps_fetch() to be used in blocking mode.

Also, don't init the pps api for system devices (consoles) that provide a
custom

Provide the tty-layer mutex when initializing the pps api. This allows
time_pps_fetch() to be used in blocking mode.

Also, don't init the pps api for system devices (consoles) that provide a
custom attach routine. The device may actually be a keyboard or other non-
tty device. If it wants to do pps processing (unlikely) it must handle
everything for itself. (In reality, only a sun keyboard uses a custom
attach routine, and it doesn't make a good pps device.)

show more ...

MFC @ r266724

An SVM update will follow this.

Merge head