clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of

clk: Move clock code in dev/clk

We've removed kernel option EXT_RESOURCES almost two years ago.
While it was ok to have some code under a common 'extres' subdirectory
at first, we now have a lot of consumer of it and we made it mandatory
so no need to have it under a cryptic name.

Reviewed by: mhorne
Sponsored by: Beckhoff Automation GmbH & Co. KG
Differential Revision: https://reviews.freebsd.org/D43191

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of

spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD

The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.

Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix

show more ...

uart_dev_imx: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differentia

uart_dev_imx: Make ext_resources non-optional

EXT_RESOURCES have been introduced in 12-CURRENT and all supported
releases have it enabled in their kernel config.

MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D33826

show more ...

Remove "All Rights Reserved" from FreeBSD Foundation sys/ copyrights

These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).

S

Remove "All Rights Reserved" from FreeBSD Foundation sys/ copyrights

These ones were unambiguous cases where the Foundation was the only
listed copyright holder (in the associated license block).

Sponsored by: The FreeBSD Foundation

show more ...

Add i.MX 8M Quad support

- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where requir

Add i.MX 8M Quad support

- Add CCM driver and clocks implementations for i.MX 8M
- Add GPC driver for iMX8
- Add clock tree for i.MX 8M Quad
- Add clocks support and new compat strings (where required) for existing i.MX 6 UART, I2C, and GPIO drivers
- Enable aarch64-compatible drivers form i.MX 6 in arm64 GENERIC kernel config
- Add dtb/imx8 kernel module with DTBs for Nitrogen8M and iMX8MQ EVK

With this patch both Nitrogen8M and iMX8MQ EVK boot with NFS root up to multiuser login prompt

Reviewed by: manu
Differential Revision: https://reviews.freebsd.org/D25274

show more ...

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error

sys/dev: further adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Catch up with HEAD (r280229-r284686).

Merge sync of head

Merge from head

MFH: r280643-r281852

Sponsored by: The FreeBSD Foundation

Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the

Add support for the uart classes to set their default register shift value.
This is needed with the pl011 driver. Before this change it would default
to a shift of 0, however the hardware places the registers at 4-byte
addresses meaning the value should be 2.

This patch fixes this for the pl011 when configured using the fdt. The
other drivers have a default value of 0 to keep this a no-op.

MFC after: 1 week

show more ...

MFH: r278968-r280640

Sponsored by: The FreeBSD Foundation

Merge r278538 through r280226.

Merge from head

Merging ^/head r279596 through r279758.

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D

Move the uart_class definitions and fdt compat data into the individual
uart implementations, and export them using the new linker-set mechanism.

Differential Revision: https://reviews.freebsd.org/D1993
Submitted by: Michal Meloun

show more ...

Merge from head@274682

Sync to HEAD@r274095.

Reintegrate head@r273095

Sponsored by: The FreeBSD Foundation

IFC @r273066

Use the FIFOs in the imx5/imx6 uart hardware instead of interrupting on
each byte sent or received.

Merge HEAD@r272944.

IFC @r272481

Sync to HEAD@r272516.