|
Revision tags: release/14.0.0 |
|
| #
71625ec9 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: one-line .c comment pattern
Remove /^/[*/]\s*\$FreeBSD\$.*\n/
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0, release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
718cf2cc |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0 |
|
| #
d7405474 |
| 15-May-2008 |
Marius Strobl <marius@FreeBSD.org> |
- Const'ify firmware and lookup-tables.
- Obsolete redundant inst_name and unit members of struct sym_hcb.
- Fix three more NULL vs. 0 confusions.
- Use device_set_softc(9) to tell the bus layer that
- Const'ify firmware and lookup-tables.
- Obsolete redundant inst_name and unit members of struct sym_hcb.
- Fix three more NULL vs. 0 confusions.
- Use device_set_softc(9) to tell the bus layer that this driver
allocates a instance of struct sym_hcb itself.
show more ...
|
|
Revision tags: release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0 |
|
| #
098ca2bd |
| 06-Jan-2005 |
Warner Losh <imp@FreeBSD.org> |
Start each of the license/copyright comments with /*-, minor shuffle of lines
|
|
Revision tags: release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0 |
|
| #
22316cf1 |
| 05-Aug-2003 |
Diomidis Spinellis <dds@FreeBSD.org> |
Remove extraneous semicolons. They are already provided by
the macro definition, and cause the generation of syntactically
incorrect code that gcc happens to accept.
Reviewed by: schweikh (mentor)
Remove extraneous semicolons. They are already provided by
the macro definition, and cause the generation of syntactically
incorrect code that gcc happens to accept.
Reviewed by: schweikh (mentor)
MFC after: 4 weeks
show more ...
|
|
Revision tags: release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
2a8dc282 |
| 11-Nov-2001 |
Gerard Roudier <groudier@FreeBSD.org> |
MFC after: 0 days
|
|
Revision tags: release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs, release/4.1.0, release/3.5.0_cvs |
|
| #
c5595f9d |
| 29-Apr-2000 |
Gerard Roudier <groudier@FreeBSD.org> |
This new version adds support for early NCR chips.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE
This new version adds support for early NCR chips.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE instructions for these chips.
2 SCRIPTS sets (firmwares) numbered #1 and #2 are
used for the whole support of the 53C8XX family
to get possible:
- FW #1 : Only based on MEMORY MOVE instructions.
Selected for 810, 815, 825.
- FW #2 : LOAD/STORE based. This is the firmware
also used by previous driver versions.
Selected for other chips.
When both `ncr' and `sym' are configured, `sym'
will now attach all the 53C8XX devices by default.
Previous balancing between `ncr' and `sym' can be
preserved by:
- Either editing sym_conf.h and commenting the
following compile option:
#define SYM_CONF_GENERIC_SUPPORT
(This also saves about 3.5Kb of kernel memory).
- Or setting kernel config option
SYM_SETUP_LP_PROBE_MAP to 64 (bit 0x40)
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0 |
|
| #
d7405474 |
| 15-May-2008 |
Marius Strobl <marius@FreeBSD.org> |
- Const'ify firmware and lookup-tables.
- Obsolete redundant inst_name and unit members of struct sym_hcb.
- Fix three more NULL vs. 0 confusions.
- Use device_set_softc(9) to tell the bus layer that
- Const'ify firmware and lookup-tables.
- Obsolete redundant inst_name and unit members of struct sym_hcb.
- Fix three more NULL vs. 0 confusions.
- Use device_set_softc(9) to tell the bus layer that this driver
allocates a instance of struct sym_hcb itself.
show more ...
|
|
Revision tags: release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0, release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0 |
|
| #
098ca2bd |
| 06-Jan-2005 |
Warner Losh <imp@FreeBSD.org> |
Start each of the license/copyright comments with /*-, minor shuffle of lines
|
|
Revision tags: release/5.3.0_cvs, release/5.3.0, release/4.10.0_cvs, release/4.10.0, release/5.2.1_cvs, release/5.2.1, release/5.2.0_cvs, release/5.2.0, release/4.9.0_cvs, release/4.9.0 |
|
| #
22316cf1 |
| 05-Aug-2003 |
Diomidis Spinellis <dds@FreeBSD.org> |
Remove extraneous semicolons. They are already provided by
the macro definition, and cause the generation of syntactically
incorrect code that gcc happens to accept.
Reviewed by: schweikh (mentor)
Remove extraneous semicolons. They are already provided by
the macro definition, and cause the generation of syntactically
incorrect code that gcc happens to accept.
Reviewed by: schweikh (mentor)
MFC after: 4 weeks
show more ...
|
|
Revision tags: release/5.1.0_cvs, release/5.1.0, release/4.8.0_cvs, release/4.8.0, release/5.0.0_cvs, release/5.0.0, release/4.7.0_cvs, release/4.6.2_cvs, release/4.6.2, release/4.6.1, release/4.6.0_cvs, release/4.5.0_cvs, release/4.4.0_cvs |
|
| #
2a8dc282 |
| 11-Nov-2001 |
Gerard Roudier <groudier@FreeBSD.org> |
MFC after: 0 days
|
|
Revision tags: release/4.3.0_cvs, release/4.3.0, release/4.2.0, release/4.1.1_cvs, release/4.1.0, release/3.5.0_cvs |
|
| #
c5595f9d |
| 29-Apr-2000 |
Gerard Roudier <groudier@FreeBSD.org> |
This new version adds support for early NCR chips.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE
This new version adds support for early NCR chips.
53C810 non 'A', 53C815 and 53C825 non 'A' are now
attached by the driver (by default).
The driver uses a different SCRIPTS set based on
MEMORY MOVE instructions for these chips.
2 SCRIPTS sets (firmwares) numbered #1 and #2 are
used for the whole support of the 53C8XX family
to get possible:
- FW #1 : Only based on MEMORY MOVE instructions.
Selected for 810, 815, 825.
- FW #2 : LOAD/STORE based. This is the firmware
also used by previous driver versions.
Selected for other chips.
When both `ncr' and `sym' are configured, `sym'
will now attach all the 53C8XX devices by default.
Previous balancing between `ncr' and `sym' can be
preserved by:
- Either editing sym_conf.h and commenting the
following compile option:
#define SYM_CONF_GENERIC_SUPPORT
(This also saves about 3.5Kb of kernel memory).
- Or setting kernel config option
SYM_SETUP_LP_PROBE_MAP to 64 (bit 0x40)
show more ...
|