|
Revision tags: release/14.0.0 |
|
| #
95ee2897 |
| 16-Aug-2023 |
Warner Losh <imp@FreeBSD.org> |
sys: Remove $FreeBSD$: two-line .h pattern
Remove /^\s*\*\n \*\s+\$FreeBSD\$$\n/
|
| #
4d846d26 |
| 10-May-2023 |
Warner Losh <imp@FreeBSD.org> |
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of
spdx: The BSD-2-Clause-FreeBSD identifier is obsolete, drop -FreeBSD
The SPDX folks have obsoleted the BSD-2-Clause-FreeBSD identifier. Catch
up to that fact and revert to their recommended match of BSD-2-Clause.
Discussed with: pfg
MFC After: 3 days
Sponsored by: Netflix
show more ...
|
|
Revision tags: release/13.2.0, release/12.4.0, release/13.1.0, release/12.3.0, release/13.0.0 |
|
| #
b63eeef4 |
| 26-Dec-2020 |
Marius Strobl <marius@FreeBSD.org> |
scc(4)/uart(4): Remove obsolete support for Siemens SAB 82532
It's no longer used since 58aa35d42975c298ca0adba705c042596303c9f5
and r357455 respectively.
|
|
Revision tags: release/12.2.0, release/11.4.0, release/12.1.0, release/11.3.0, release/12.0.0, release/11.2.0 |
|
| #
718cf2cc |
| 27-Nov-2017 |
Pedro F. Giffuni <pfg@FreeBSD.org> |
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
sys/dev: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.
The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0 |
|
| #
e1ef7811 |
| 03-Mar-2008 |
Rafal Jaworowski <raj@FreeBSD.org> |
Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel re
Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel resources, which are in
turn muxed/demuxed by the Serial Communications Controller (SCC).
Along with core QUICC/SCC functionality a uart(4)-compliant device driver is
provided which allows for serial ports over QUICC/SCC.
Approved by: cognet (mentor)
Obtained from: Juniper
MFp4: e500
show more ...
|
|
Revision tags: release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0 |
|
| #
6174e6ed |
| 30-Mar-2006 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Add scc(4), a driver for serial communications controllers. These
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an
Add scc(4), a driver for serial communications controllers. These
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
show more ...
|
|
Revision tags: release/10.4.0, release/11.1.0, release/11.0.1, release/11.0.0, release/10.3.0, release/10.2.0, release/10.1.0, release/9.3.0, release/10.0.0, release/9.2.0, release/8.4.0, release/9.1.0, release/8.3.0_cvs, release/8.3.0, release/9.0.0, release/7.4.0_cvs, release/8.2.0_cvs, release/7.4.0, release/8.2.0, release/8.1.0_cvs, release/8.1.0, release/7.3.0_cvs, release/7.3.0, release/8.0.0_cvs, release/8.0.0, release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0 |
|
| #
e1ef7811 |
| 03-Mar-2008 |
Rafal Jaworowski <raj@FreeBSD.org> |
Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel re
Support for Freescale QUad Integrated Communications Controller.
The QUICC engine is found on various Freescale parts including MPC85xx, and
provides multiple generic time-division serial channel resources, which are in
turn muxed/demuxed by the Serial Communications Controller (SCC).
Along with core QUICC/SCC functionality a uart(4)-compliant device driver is
provided which allows for serial ports over QUICC/SCC.
Approved by: cognet (mentor)
Obtained from: Juniper
MFp4: e500
show more ...
|
|
Revision tags: release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0 |
|
| #
6174e6ed |
| 30-Mar-2006 |
Marcel Moolenaar <marcel@FreeBSD.org> |
Add scc(4), a driver for serial communications controllers. These
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an
Add scc(4), a driver for serial communications controllers. These
controllers typically have multiple channels and support a number
of serial communications protocols. The scc(4) driver is itself
an umbrella driver that delegates the control over each channel
and mode to a subordinate driver (like uart(4)).
The scc(4) driver supports the Siemens SAB 82532 and the Zilog
Z8530 and replaces puc(4) for these devices.
show more ...
|