rtwn: expand the ridx numbers to include VHT; add accessor macros

* expand the ridx field all the way through 4x4 11n (MCS0..MCS31)
* and then expand it through VHT 4x4 (MCS0..9 for each stream)
* a

rtwn: expand the ridx numbers to include VHT; add accessor macros

* expand the ridx field all the way through 4x4 11n (MCS0..MCS31)
* and then expand it through VHT 4x4 (MCS0..9 for each stream)
* add accessor macros to check if the rate is HT, VHT
* use accessor macros to check if the rate is HT rather than
comparing it against OFDM54 or RIDX_HT_MCS(0); the values
aobve HT MCS will be VHT, and we don't want to trigger on those!
* add a couple of appropriate TODO VHT bits in the TX path

Locally tested:

* RTL8192CU, STA mode
* RTL8188EU, STA mode
* RTL8821AU, STA mode
* RTL8192EU, STA mode

Differential Revision: https://reviews.freebsd.org/D47896

show more ...

sys: Remove $FreeBSD$: one-line .c pattern

Remove /^[\s*]*__FBSDID\("\$FreeBSD\$"\);?\s*\n/

rtwn: clean up empty lines in .c and .h files

rtwn_pci(4): add support for event-based Tx reports.

It will be used for RTL8188EE (and, probably, others).

MFC after: 4 days

rtwn(4): de-hardcode ('h/w rate index' - 'corresponding MCS index') constant

MFH @ r323558.

MFhead@r323343

rtwn(4): some initial preparations for (basic) VHT support.

Rename RTWN_RIDX_MCS to RTWN_RIDX_HT_MCS before adding 802.11ac
MCS rate indexes (they have different offset).

No functional change inten

rtwn(4): some initial preparations for (basic) VHT support.

Rename RTWN_RIDX_MCS to RTWN_RIDX_HT_MCS before adding 802.11ac
MCS rate indexes (they have different offset).

No functional change intended.

show more ...

MFhead@r313243

Merge ^/head r312309 through r312623.

rtwn: export more stats to net80211

Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;

rtwn: export more stats to net80211

Setup more ieee80211_rx_stats fields for received frames:
- pktflags:
* IEEE80211_RX_F_FAIL_FCSCRC;
* IEEE80211_RX_F_AMPDU;
* IEEE80211_RX_F_AMPDU_MORE;
* IEEE80211_RX_F_SHORTGI;
- rate flags (CCK, OFDM, HT);
- width;
- phytype;
- rate;
- rx_tsf;
- rssi;
- nf;
- ieee, freq (RTL8188EU only, when ht40 support is disabled).

Tested with:
- RTL8188CE, RTL8188EU, RTL8821AU (STA / AP modes, i386)
- (by kevlo) RTL8188EU and RTL8812AU (amd64)

Reviewed by: adrian (previous version), kevlo
Differential Revision: https://reviews.freebsd.org/D9021

show more ...

Merge ^/head r307383 through r307735.

rtwn(4), urtwn(4): merge common code, add support for 11ac devices.

All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- m

rtwn(4), urtwn(4): merge common code, add support for 11ac devices.

All devices:
- add support for rate adaptation via ieee80211_amrr(9);
- use short preamble for transmitted frames when needed;
- multi-bss support:
* for RTL8821AU: 2 VAPs at the same time;
* other: 1 any VAP + 1 sta VAP.
RTL8188CE:
- fix IQ calibration bug (reason of significant speed degradation);
- add h/w crypto acceleration support.
USB:
- A-MPDU Tx support;
- short GI support;
Other:
- add support for RTL8812AU / RTL8821AU chipsets
(a/b/g/n only; no ac yet);
- split merged code into subparts:
* bus glue (usb/*, pci/*, rtl*/usb/*, rtl*/pci/*)
* common (if_rtwn*)
* chip-specific (rtl*/*)
- various other bugfixes.

Due to code reorganization, module names / requirements were changed too:
urtwn urtwnfw -> rtwn rtwn_usb rtwnfw
rtwn rtwnfw -> rtwn rtwn_pci rtwnfw

Tested with RTL8188CE, RTL8188CUS, RTL8188EU and RTL8821AU.

Tested by: kevlo, garga,
Peter Garshtja <peter.garshtja@ambient-md.com>,
Kevin McAleavey <kevin.mcaleavey@knosproject.com>,
Ilias-Dimitrios Vrachnis <id@vrachnis.com>,
<otacilio.neto@bsd.com.br>
Relnotes: yes

show more ...